Study of Nd Electrodeposition from the Aprotic Organic Solvent Dimethyl Sulfoxide

The use of organic solvents in an electrolytic system for neodymium electrorecovery by electrolysis at low temperatures is studied in the current work. More specifically, an alternative route, that of the system of DMSO (Dimethyl sulfoxide) with dissolved NdCl3 has been researched and has given promising results. The study of this electrolytic system has been divided into two stages. Firstly, the characteristics of the electrolyte, the dissolution of NdCl3 in DMSO, the conductivity and the viscosity of NdCl3 solutions in DMSO at various temperatures, and the Nd complexation in the solution were studied and secondly, the electrolysis parameters and their impact on the Nd electrodeposition process were evaluated. Finally, the deposits were submitted to SEM-EDS (Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy) analysis and metallic Nd was confirmed to be electrodeposited by X-ray Photoelectron Spectroscopy (XPS) spectroscopy

Assessing the role of redox partners in TthLPMO9G and its mutants: focus on H2O2 production and interaction with cellulose

Abstract Background The field of enzymology has been profoundly transformed by the discovery of lytic polysaccharide monooxygenases (LPMOs). LPMOs hold a unique role in the natural breakdown of recalcitrant polymers like cellulose and chitin. They are characterized by a “histidine brace” in their active site, known to operate via an O2/H2O2 mechanism and require an electron source for catalytic activity. Although significant research has been conducted in the field, the relationship between these enzymes, their electron donors, and H2O2 production remains complex and multifaceted. Results This study examines TthLPMO9G activity, focusing on its interactions with various electron donors, H2O2, and cellulose substrate interactions. Moreover, the introduction of catalase effectively eliminates H2O2 interference, enabling an accurate evaluation of each donor’s efficacy based on electron delivery to the LPMO active site. The introduction of catalase enhances TthLPMO9G’s catalytic efficiency, leading to increased cellulose oxidation. The current study provides deeper insights into specific point mutations, illuminating the crucial role of the second coordination sphere histidine at position 140. Significantly, the H140A mutation not only impacted the enzyme’s ability to oxidize cellulose, but also altered its interaction with H2O2. This change was manifested in the observed decrease in both oxidase and peroxidase activities. Furthermore, the S28A substitution, selected for potential engagement within the His1–electron donor–cellulose interaction triad, displayed electron donor-dependent alterations in cellulose product patterns. Conclusion The interaction of an LPMO with H2O2, electron donors, and cellulose substrate, alongside the impact of catalase, offers deep insights into the intricate interactions occurring at the molecular level within the enzyme. Through rational alterations and substitutions that affect both the first and second coordination spheres of the active site, this study illuminates the enzyme’s function. These insights enhance our understanding of the enzyme’s mechanisms, providing valuable guidance for future research and potential applications in enzymology and biochemistry

Effect of lignin fractions isolated from different biomass sources on cellulose oxidation by fungal lytic polysaccharide monooxygenases

Abstract Background Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that oxidatively cleave recalcitrant lignocellulose in the presence of oxygen or hydrogen peroxide as co-substrate and a reducing agent as electron donor. One of the possible systems that provide electrons to the LPMOs active site and promote the polysaccharide degradation involves the mediation of phenolic agents, such as lignin, low-molecular-weight lignin-derived compounds and other plant phenols. In the present work, the interaction of the bulk insoluble lignin fraction extracted from pretreated biomass with LPMOs and the ability to provide electrons to the active site of the enzymes is studied. Results The catalytic efficiency of three LPMOs, namely MtLPMO9 with C1/C4 regioselectivity, PcLPMO9D which is a C1 active LPMO and NcLPMO9C which is a C4 LPMO, was evaluated in the presence of different lignins. It was correlated with the physicochemical and structural properties of lignins, such as the molecular weight and the composition of aromatic and aliphatic hydroxyl groups. Moreover, the redox potential of lignins was determined with the use of large amplitude Fourier Transform alternating current cyclic voltammetry method and compared to the formal potential of the Cu (II) center in the active site of the LPMOs, providing more information about the lignin-LPMO interaction. The results demonstrated the existence of low-molecular weight lignin-derived compounds that are diffused in the reaction medium, which are able to reduce the enzyme active site and subsequently utilize additional electrons from the insoluble lignin fraction to promote the LPMO oxidative activity. Regarding the bulk lignin fractions, those isolated from the organosolv pretreated materials served as the best candidates in supplying electrons to the soluble compounds and, finally, to the enzymes. This difference, based on biomass pretreatment, was also demonstrated by the activity of LPMOs on natural substrates in the presence and absence of ascorbic acid as additional reducing agent. Conclusions Lignins can support the action of LPMOs and serve indirectly as electron donors through low-molecular-weight soluble compounds. This ability depends on their physicochemical and structural properties and is related to the biomass source and pretreatment method

Encapsulation of Antifouling Organic Biocides in Poly(lactic acid) Nanoparticles

The scope of the current research was to assess the feasibility of encapsulating three commercial antifouling compounds, Irgarol 1051, Econea and Zinc pyrithione, in biodegradable poly(lactic acid) (PLA) nanoparticles. The emulsification–solvent evaporation technique was herein utilized to manufacture nanoparticles with a biocide:polymer ratio of 40%. The loaded nanoparticles were analyzed for their size and size distribution, zeta potential, encapsulation efficiency and thermal properties, while the relevant physicochemical characteristics were correlated to biocide–polymer system. In addition, the encapsulation process was scaled up and the prepared nanoparticles were dispersed in a water-based antifouling paint in order to examine the viability of incorporating nanoparticles in such coatings. Metallic specimens were coated with the nanoparticles-containing paint and examined regarding surface morphology

All-organic sulfonium salts acting as efficient solution processed electron injection layer for PLEDs

Herein we introduce the all-organic triphenylsulfonium (TPS) salts cathode interfacial layers (CILs), deposited from their methanolic solution, as a new simple strategy for circumventing the use of unstable low work function metals and obtaining charge balance and high electroluminescence efficiency in polymer light-emitting diodes (PLEDs). In particular, we show that the incorporation of TPS-triflate or TPS-nonaflate at the polymer/Al interface improved substantially the luminous efficiency of the device (from 2.4 to 7.9 cd/A) and reduced the turn-on and operating voltage, whereas an up to 4-fold increase in brightness (∼11 250 cd/m2 for TPS-triflate and ∼14 682 cd/m2 for TPS-nonaflate compared to ∼3221 cd/m2 for the reference device) was observed in poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-2, 1′,3-thiadiazole)] (F8BT)-based PLEDs. This was mainly attributed to the favorable decrease of the electron injection barrier, as derived from the open-circuit voltage (Voc) measurements, which was also assisted by the conduction of electrons through the triphenylsulfonium salt sites. Density functional theory calculations indicated that the total energy of the anionic (reduced) form of the salt, that is, upon placing an electron to its lowest unoccupied molecular orbital, is lower than its neutral state, rendering the TPS-salts stable upon electron transfer in the solid state. Finally, the morphology optimization of the TPS-salt interlayer through controlling the processing parameters was found to be critical for achieving efficient electron injection and transport at the respective interfaces.</p