Fiber optical cable and connector system (FOCCoS) for PFS/ Subaru

FOCCoS, "Fiber Optical Cable and Connector System" has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. To assure strong and accurate connection, these sets are arranged inside two types of assemblies: the Tower Connector, for connection between Cable C and Cable B; and the Gang Connector, for connection between Cable B and Cable A. Throughput tests were made to evaluate the efficiency of the connections. A lifetime test connection is in progress. Cable C is installed inside the PFI, Prime Focus Instrument, where each fiber tip with a microlens is bonded to the end of the shaft of a 2-stage piezo-electric rotatory motor positioner; this assembly allows each fiber to be placed anywhere within its patrol region, which is 9.5mm diameter.. Each positioner uses a fiber arm to support the ferrule, the microlens, and the optical fiber. 2400 of these assemblies are arranged on a motor bench plate in a hexagonal-closed-packed disposition. All optical fibers from Cable C, protected by tubes, pass through the motors’ bench plate, three modular plates and a strain relief box, terminating at the Tower Connector. Cable B is permanently installed at Subaru Telescope structure, as a link between Cable C and Cable A. This cable B starts at the Tower Connector device, placed on a lateral structure of the telescope, and terminates at the Gang Connector device. Cable B will be routed to minimize the compression, torsion and bending caused by the cable weight and telescope motion. In the spectrograph room, Cable A starts at the Gang Connector, crosses a distribution box and terminates in a slit device. Each slit device receives approximately 600 optical fibers, linearly arrayed in a curve for better orientation of the light to the spectrograph collimator mirror. Four sets of Gang Connectors, distribution boxes and Slit devices complete one Cable A. This paper will review the general design of the FOCCoS subsystem, methods used to manufacture the involved devices, and the needed tests results to evaluate the total efficiency of the set

Socioeconomic position and mortality risk of smoking: evidence from the English Longitudinal Study of Ageing (ELSA).

Background: It is not clear whether the harm associated with smoking differs by socioeconomic status. This study tests the hypothesis that smoking confers a greater mortality risk for individuals in low socioeconomic groups, using a cohort of 18 479 adults drawn from the English Longitudinal Study of Ageing. Methods:- Additive hazards models were used to estimate the absolute smoking-related risk of death due to lung cancer or Chronic Obstructive Pulmonary Disease (COPD). Smoking was measured using a continuous index that incorporated the duration of smoking, intensity of smoking and the time since cessation. Attributable death rates were reported for different levels of education, occupational class, income and wealth. Results: Smoking was associated with higher absolute mortality risk in lower socioeconomic groups for all four socioeconomic indicators. For example, smoking 20 cigarettes per day for 40 years was associated with 898 (95% CI 738, 1058) deaths due to lung cancer or COPD per 100 000 person-years among participants in the bottom income tertile, compared to 327 (95% CI 209, 445) among participants in the top tertile. Conclusions: Smoking is associated with greater absolute mortality risk for individuals in lower socioeconomic groups. This suggests greater public health benefits of smoking prevention or cessation in these groups

PREVALÊNCIA DE BAIXO PESO E EXCESSO DE PESO EM ESCOLARES DE FEIRA DE SANTANA-BA

Nas últimas décadas, países em desenvolvimento como o Brasil, vêm passando por importantes mudanças sociais, econômicas e demográficas que se refletem no perfil nutricional de sua população. E, este conjunto de transformações que impactam diretamente no hábito alimentar do indivíduo, com o aumento do consumo de açucares, gorduras e redução da ingesta de fibras entre outros recebe o nome de “transição nutricional”. Este fenômeno, é fator de risco importante para o desenvolvimento de doenças como obesidade, doenças metabólicas e cardiovasculares (COUTINHO, 2008

Polish device for FOCCoS/PFS slit system

The Fiber Optical Cable and Connector System, FOCCoS, for the Prime Focus Spectrograph, PFS, is responsible for transporting light from the Subaru Telescope focal plane to a set of four spectrographs. Each spectrograph will be fed by a convex curved slit with 616 optical fibers organized in a linear arrangement. The slit frontal surface is covered with a special dark composite, made with refractory oxide, which is able to sustain its properties with minimum quantities of abrasives during the polishing process; this stability is obtained This stability is obtained by the detachment of the refractory oxide nanoparticles, which then gently reinforce gently the polishing process and increase its the efficiency. The surface roughness measured in several samples after high performance polishing was about 0.01 microns. Furthermore, the time for obtaining a polished surface with this quality is about 10 times less than the time required for polishing a brass, glass or ceramic surface of the same size. In this paper, we describe the procedure developed for high quality polishing of this type of slit. The cylindrical polishing described here, uses cylindrical concave metal bases on which glass paper is based. The polishing process consists to use grid sequences of 30 microns, 12 microns, 9 microns, 5 microns, 3 microns, 1 micron and, finally, a colloidal silica on a chemical cloth. To obtain the maximum throughput, the surface of the fibers should be polished in such a way that they are optically flat and free from scratches. The optical fibers are inspected with a microscope at all stages of the polishing process to ensure high quality. The efficiency of the process may be improved by using a cylindrical concave composite base as a substrate suitable for diamond liquid solutions. Despite this process being completely by hand, the final result shows a very high quality

Fiber optical cable and connector system (FOCCoS) for PFS/ Subaru

FOCCoS, "Fiber Optical Cable and Connector System" has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. To assure strong and accurate connection, these sets are arranged inside two types of assemblies: the Tower Connector, for connection between Cable C and Cable B; and the Gang Connector, for connection between Cable B and Cable A. Throughput tests were made to evaluate the efficiency of the connections. A lifetime test connection is in progress. Cable C is installed inside the PFI, Prime Focus Instrument, where each fiber tip with a microlens is bonded to the end of the shaft of a 2-stage piezo-electric rotatory motor positioner; this assembly allows each fiber to be placed anywhere within its patrol region, which is 9.5mm diameter.. Each positioner uses a fiber arm to support the ferrule, the microlens, and the optical fiber. 2400 of these assemblies are arranged on a motor bench plate in a hexagonal-closed-packed disposition. All optical fibers from Cable C, protected by tubes, pass through the motors’ bench plate, three modular plates and a strain relief box, terminating at the Tower Connector. Cable B is permanently installed at Subaru Telescope structure, as a link between Cable C and Cable A. This cable B starts at the Tower Connector device, placed on a lateral structure of the telescope, and terminates at the Gang Connector device. Cable B will be routed to minimize the compression, torsion and bending caused by the cable weight and telescope motion. In the spectrograph room, Cable A starts at the Gang Connector, crosses a distribution box and terminates in a slit device. Each slit device receives approximately 600 optical fibers, linearly arrayed in a curve for better orientation of the light to the spectrograph collimator mirror. Four sets of Gang Connectors, distribution boxes and Slit devices complete one Cable A. This paper will review the general design of the FOCCoS subsystem, methods used to manufacture the involved devices, and the needed tests results to evaluate the total efficiency of the set

Calagem e adubação na recuperação de pastagem degradada de Brachiaria decumbens em neossolo quartzarênico

Na recuperação de pastagens é fundamental a reconstituição da fertilidade do solo, sendo a calagem a primeira ação nessa direção. A recomendação de calagem para pastagens necessita de maiores subsídios técnicos, como a forma de aplicação e a dose e o tipo de calcário a ser empregado. Um experimento de campo foi instalado para avaliar a calagem e a adubação como práticas para a recuperação de pastagens de Brachiaria decumbens degradadas. Os seguintes fatores foram estudados: a forma de aplicação do calcário (incorporado no solo com gradagem ou não incorporado), os níveis de saturação por bases de 40, 60 ou 80% e tipos de calcário (PRNT de 55, 70 ou 90). A calagem e a fertilização (NPK e micronutrientes) aumentaram as produções da forragem e do seu sistema radicular, sendo os efeitos mais acentuados no segundo ano, apesar do uso de mesmas doses de corretivos e fertilizantes do primeiro ano. Após dois anos não se conseguiu atingir os níveis de saturação por bases pretendidos na camada de 0 - 0,20 m, bem como a neutralização do Al. A gradagem prejudicou o desenvolvimento do sistema radicular da forrageira e promoveu queda nos teores da matéria orgânica no solo. O calcário de PRNT mais baixo aumentou a produção de raízes e proporcionou as maiores concentrações de Ca e Mg no solo. Estudos em outras condições são necessários para se aprimorar a recomendação de calagem para pastagens estabelecidas e degradadas.The reconstitution of soil fertility is essential in the process of pasture restoring, liming being the first action to be taken in this direction. The liming recommendation for pastures needs more technical information as the application method and rate. A field experiment was carried out to evaluate the liming and fertilization practices to restore a degraded Brachiaria decumbens pasture. The following factors were studied: liming method (incorporated in soil by disking or not); level of base saturation (40, 50 or 80%) and lime type (55, 70 or 90 of ECC). Liming and fertilization (NPK and micronutrients) increased both the forage yield and its root system, these being more evident in the second year, even using the same rates of lime and fertilizer used during the first year. After two years the levels of base saturation aimed for the 0 to 0.20 m soil layer were not achieved, neither was the neutralization of the Al. The disking impaired the development of the root system of B. decumbens and promoted the decrease of soil organic matter. The lime with the lowest ECC increased root growth and led to higher concentrations of Ca and Mg in the soil. Studies in other conditions are necessary to define liming requirements in established and degraded pastures

INFLUÊNCIA DOS FATORES SOCIOECONÔMICOS NO DESENVOLVIMENTO DO PESO EM ESCOLARES DE FEIRA DE SANTANA-BA

Nas últimas décadas, importantes mudanças econômicas, sociais e tecnológicas propiciaram alterações no perfil epidemiológico das doenças nas sociedades modernas. Nesse cenário, variações nos indicadores nutricionais favoreceram um aumento significativo da obesidade, observado tanto em adultos quanto em crianças. Dados recentes do NCD Risk Factor Collaboration mostram que essa condição afeta cerca de 671 milhões de adultos no mundo, o que representa aproximadamente 10% da população mundial (NCD-RISC, 2017)

Transcriptional regulatory networks controlling woolliness in peach in response to preharvest gibberellin application and cold storage

BACKGROUND: Postharvest fruit conservation relies on low temperatures and manipulations of hormone metabolism to maintain sensory properties. Peaches are susceptible to chilling injuries, such as ‘woolliness’ that is caused by juice loss leading to a ‘wooly’ fruit texture. Application of gibberellic acid at the initial stages of pit hardening impairs woolliness incidence, however the mechanisms controlling the response remain unknown. We have employed genome wide transcriptional profiling to investigate the effects of gibberellic acid application and cold storage on harvested peaches. RESULTS: Approximately half of the investigated genes exhibited significant differential expression in response to the treatments. Cellular and developmental process gene ontologies were overrepresented among the differentially regulated genes, whereas sequences in cell death and immune response categories were underrepresented. Gene set enrichment demonstrated a predominant role of cold storage in repressing the transcription of genes associated to cell wall metabolism. In contrast, genes involved in hormone responses exhibited a more complex transcriptional response, indicating an extensive network of crosstalk between hormone signaling and low temperatures. Time course transcriptional analyses demonstrate the large contribution of gene expression regulation on the biochemical changes leading to woolliness in peach. CONCLUSION: Overall, our results provide insights on the mechanisms controlling the complex phenotypes associated to postharvest textural changes in peach and suggest that hormone mediated reprogramming previous to pit hardening affects the onset of chilling injuries. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s12870-015-0659-2) contains supplementary material, which is available to authorized users

Photoluminescence studies in rare earth ions coordinated by a carbazolic derivative

[RE(czb)3(H2O)2] complexes (where RE = Eu3+, Tb3+, Gd3+; and czb = 4-(9H-carbazol-9-yl)benzoato) have been synthesized and characterized. The Gd3+ complex was used to determine the triplet state energy of the czb ligand. Photoluminescence measurements of the complexes have been carried out under UV excitation. The Tb3+ complex exhibited a strong green luminescence indicating an efficient antenna effect, whereas the Eu3+ complex showed low red luminescence and the Gd3+ complex a blue-green luminescence from the ligand. The luminescence lifetimes and quantum yields have also been measured for the evaluation of the spectroscopic behavior of the complexes.Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES)CNPq - RENAMI/inct-INAMIFAPES