Comparing different solutions for testing resistive defects in low-power SRAMs

Low-power SRAM architectures are especially sensitive to many types of defects that may occur during manufacturing. Among these, resistive defects can appear. This paper analyzes some types of such defects that may impair the device functionalities in subtle ways, depending on the defect characteristics, and that may not be directly or easily detectable by traditional test methods, such as March algorithms. We analyze different methods to test such defects and discuss them in terms of complexity and test time

Regional variation of wall shear stress in ascending thoracic aortic aneurysms

The development of an ascending thoracic aortic aneurysm is likely caused by excessive hemodynamic loads exerted on the aneurysmal wall. Computational fluid-dynamic analyses were performed on patient-specific ascending thoracic aortic aneurysms obtained from patients with either bicuspid aortic valve or tricuspid aortic valve to evaluate hemodynamic and wall shear parameters, imparting aneurysm enlargement. Results showed an accelerated flow along the outer aortic wall with helical flow in the aneurysm center for bicuspid aortic valve ascending thoracic aortic aneurysms. In a different way, tricuspid aortic valve ascending thoracic aortic aneurysms exhibited normal systolic flow without substantial secondary pattern. Analysis of wall shear parameters evinced a high and locally varying wall shear stress on the outer aortic wall and high temporal oscillations in wall shear stress (oscillatory shear index) on either left or right side of aneurysmal aorta. These findings may explain the asymmetric dilatation typically observed in ascending thoracic aortic aneurysms. Simulations of a hypertensive scenario revealed an increase in wall shear stress upon 44% compared to normal systemic pressure models. Computational fluid-dynamics-based analysis may allow identification of wall shear parameters portending aneurysm dilatation and hence guide preventative intervention

Evaluation of ventricular wall stress and cardiac function in patients with dilated cardiomyopathy

Dilated cardiomyopathy is a heart disease characterized by both left ventricular dilatation and left ventricular systolic dysfunction, leading to cardiac remodeling and ultimately heart failure. We aimed to investigate the effect of dilated cardiomyopathy on the pump performance and myocardial wall mechanics using patient-specific finite element analysis. Results evinced pronounced end-systolic wall stress on left ventricular wall of patients with dilated cardiomyopathy as compared to that of normal hearts. In dilated cardiomyopathy, both end-diastolic and end-systolic pressure-volume relationships of left ventricle and right ventricle were shifted to the right compared to controls, suggesting reduced myocardial contractility. We hereby propose that finite element analysis represents a useful tool to assess the myocardial wall stress and cardiac work, which are responsible for progressive left ventricular deterioration and poor clinical course

Computational fluid dynamics simulation to evaluate aortic coarctation gradient with contrast-enhanced CT

Coarctation of aorta (CoA) is a narrowing of the aorta leading to a pressure gradient (Delta P) across the coarctation, increased afterload and reduced peripheral perfusion pressures. Indication to invasive treatment is based on values of maximal (systolic) trans-coarctation Delta P. A computational fluid dynamic (CFD) approach is herein presented for the non-invasive haemodynamic assessment of Delta P across CoA. Patient-specific CFD simulations were created from contrast-enhanced computed tomography (CT) and appropriate flow boundary conditions. Computed Delta P was validated with invasive intravascular trans-CoA pressure measurements. Haemodynamic indices, including pressure loss coefficient (PLc), time-averaged wall shear stress (TAWSS) and oscillatory shear index (OSI), were also quantified. CFD-estimated Delta P values were comparable to the invasive ones. Moreover, the aorta proximal to CoA was exposed to altered TAWSS and OSI suggesting hypertension. PLc was found as a further geometric marker of CoA severity. Finally, CFD-estimated Delta P confirmed a significant reduction after percutaneous balloon dilatation and stenting of the CoA in one patient (e.g. from Delta P similar to 52mmHg to Delta P similar to 3mmHg). The validation of the Delta P computations with catheterisation measurements suggests that CFD simulation, based on CT-derived anatomical data, is a useful tool to readily quantify CoA severity

An in vitro phantom study on the role of the bird-beak configuration in endograft infolding in the aortic arch

Purpose: To assess endograft infolding for excessive bird-beak configurations in the aortic arch in relation to hemodynamic variables by quantifying device displacement and rotation of oversized stent-grafts deployed in a phantom model. Methods: A patient-specific, compliant, phantom pulsatile flow model was reconstructed from a patient who presented with collapse of a Gore TAG thoracic endoprosthesis. Device infolding was measured under different flow and pressure conditions for 3 protrusion extensions (13, 19, and 24 mm) of the bird-beak configuration resulting from 2 TAG endografts with oversizing of 11% and 45%, respectively. Results: The bird-beak configuration with the greatest protrusion extension exhibited the maximum TAG device displacement (1.66 mm), while the lowest protrusion extension configuration led to the minimum amount of both displacement and rotation parameters (0.25 mm and 0.6°, respectively). A positive relationship was found between the infolding parameters and the flow circulating in the aorta and left subclavian artery. Similarly, TAG device displacement was positively and significantly (p<0.05) correlated with the pulse pressure for all bird-beak configurations and device sizes. However, no collapse was observed under chronic perfusion testing maintained for 30 days and pulse pressure of 100 mm Hg. Conclusion: These findings suggest that endograft infolding depends primarily on the amount of aortic pulsatility and flow rate and that physiological flows do not necessarily engender hemodynamic loads on the proximal bird-beak segment sufficient to cause TAG collapse. Hemodynamic variables may allow for identification of patients at high risk of endograft infolding and help guide preventive intervention to avert its occurrence