Thermal Analysis as a Tool in Materials Science

As an emerging discipline, pharmaceutical materials science correlates physical properties of active compounds and pharmaceutical ingredients with the performance of the finished dosage product. Small molecules of pharmaceutical interest can exist in many different forms called morphs, which have different degrees of order at the atomic level. Detection, characterisation and quantification of amorphous, polymorphs and pseudo-polymorhs have been recent subjects of research globally. The thermal analysis (TA) has been extensively used to provide insight into structural changes on molecular level. Therefore, TA is the most important analytical tool for studying physico-chemical properties of materials. Amongst the most widely used thermal analytical techniques are thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and hot stage microscopy (HSM). Recently, differential mechanical analysis (DMA) and thermally stimulated current (TSC) spectroscopy draw attention to a new ways of monitoring motions and changes in the structure of materials. Basic principles and applications of the most widely used TA techniques are main scope of the presentation. In addition, novel approaches and hyphenated techniques will be introduced

Qualified Person Learning Programme Development: An Example of the Tempus Joint Project Activity

The role of Qualified Person (QP) is a pivotal one in Quality Assurance within the pharmaceutical industry. The competences required are usually achieved through work experience and more formal forms of learning, such as postgraduate MSc and/or relevant short-term courses. Duties of QP in the pharmaceutical sector in Serbia used to be performed by expert pharmacists with the relevant industrial experience and a Postgraduate Specialization Degree in Drug Analysis and Quality Control. However, it has been recognized that the learning needs of QPs should be extended to include knowledge of drug formulation and manufacturing processes. Taking into account the pre-accession status of Serbia, harmonization with EU practice and policies has been emphasized. In particular, compliance with EU directives 2001/82/EC and 2001/83/EC, which detail the role of, and academic qualifications required by a QP will be necessary. In order to respond to this need which has been highlighted within the sector, the Faculty of Pharmacy, University of Belgrade took responsibility for establishing the relevant postgraduate course, and set this as one of the priorities of the current Tempus PQPharm Project. The aim of this work is to provide an example of an outcomes-based interactive approach to curriculum development performed through an international joint-project collaboration activity

Formulation development of a carrageenan based delivery system for buccal drug delivery using ibuprofen as a model drug

Solvent cast films are used as oral strips with potential to adhere to the mucosal surface, hydrate and deliver drugs across the buccal membrane. The objective of this study was the formulation development of bioadhesive films with optimum drug loading for buccal delivery. Films prepared from κ-carrageenan, poloxamer and polyethylene glycol or glycerol, were loaded with ibuprofen as a model water insoluble drug. The films were characterized using texture analysis (TA), hot stage microscopy (HSM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), x-ray powder diffraction (XRPD), high performance liquid chromatography (HPLC) and in vitro drug dissolution. Optimized films were obtained from aqueous gels containing 2.5% w/w κ-carrageenan 911, 4% w/w poloxamer 407 and polyethylene glycol (PEG) 600 [5.5% w/w (non-drug loaded) and 6.5% w/w (drug loaded)]. A maximum of 0.8% w/w ibuprofen could be incorporated into the gels to obtain films with optimum characteristics. Texture analysis confirmed that optimum film flexibility was achieved from 5.5% w/w and 6.5% (w/w) of PEG 600 for blank films and ibuprofen loaded films respectively. TGA showed residual water content of the films as approximately 5%. DSC revealed a Tg for ibuprofen at −53.87°C, a unified Tm for PEG 600/poloxamer mixture at 32.74°C and the existence of ibuprofen in amorphous form, and confirmed by XRPD. Drug dissolution at a pH simulating that of saliva showed that amorphous ibuprofen was released from the films at a faster rate than the pure crystalline drug. The results show successful design of a carrageenan and poloxamer based drug delivery system with potential for buccal drug delivery and showed the conversion of crystalline ibuprofen to the amorphous form during film formation

An Overview of Chitosan-Xanthan Gum Matrices as Controlled Release Drug Carriers

Naturally occurring polysaccharides and/or their chemically modified derivatives have been widely investigated in relation to their use as components of controlled release systems for drug delivery. The aforementioned is due, in part, to their distinct properties such as abundant availability and biocompatibility as well as environmental and economic advantages. Chitosan (CS) and xanthan gum (XG) based matrices have received growing scientific/pharmaceutical interest as oral controlled release drug carriers. Herein, recent advances spanning the last two decades in CS-XG based drug delivery systems are reviewed with the emphasis being on oral tablet formulations, due to their versatility as pharmaceutical dosage forms. The mechanism of interaction between CS and XG, by means of computational and experimental approaches, is scrutinized. Results obtained from the literature establish the possibility of fabricating a controlled release drug delivery system based on CS and XG matrices. This can be achieved by monitoring and manipulating the physiochemical properties of the two polymers as well as the experimental variables affecting their drug retardation efficiency, without the need to employ special equipment or sophisticated experimental techniques/methodologies

Thermal studies of L, D and β-alanine

α-Amino acids are generally studied by spectroscopic techniques, to determine their structure and distinguish between L and D forms (Caroline et al., 2009). Their study via thermal analysis is usually combined with other analytical techniques such as FT-IR, MS, HPLC, GC or NMR to identify the products of thermal decomposition (Kumar et al., 2006, Rodante and Marrosu, 1990). It is intriguing to ascertain whether thermal analytical techniques alone can provide useful information about amino acids, in terms of their physicochemical properties, and their techniques ability to distinguish between L and D forms

Effect of protonation state and N-acetylation of chitosan on its interaction with xanthan gum: a molecular dynamics simulation study

Hydrophilic matrices composed of chitosan (CS) and xanthan gum (XG) complexes are of pharmaceutical interest in relation to drug delivery due to their ability to control the release of active ingredients. Molecular dynamics simulations (MDs) have been performed in order to obtain information pertaining to the effect of the state of protonation and degree of N-acetylation (DA) on the molecular conformation of chitosan and its ability to interact with xanthan gum in aqueous solutions. The conformational flexibility of CS was found to be highly dependent on its state of protonation. Upon complexation with XG, a substantial restriction in free rotation around the glycosidic bond was noticed in protonated CS dimers regardless of their DA, whereas deprotonated molecules preserved their free mobility. Calculated values for the free energy of binding between CS and XG revealed the dominant contribution of electrostatic forces on the formation of complexes and that the most stable complexes were formed when CS was at least half-protonated and the DA was ≤50%. The results obtained provide an insight into the main factors governing the interaction between CS and XG, such that they can be manipulated accordingly to produce complexes with the desired controlled-release effect

Glassy state molecular mobility and its relationship to the physico-mechanical properties of plasticized hydroxypropyl methylcellulose (HPMC) films

Changes in tensile properties and the glass transition temperature (Tg) of plasticized polymer films are typically attributed to molecular mobility, often with no empirical data to support such an assertion. Herein solvent cast HPMC films containing varying amounts of PEG, as the plasticizer, were used to assess the dependence of tensile properties and the Tg on glassy state molecular mobility. Molecular mobility (molecular relaxation time and temperature) parameters were determined by Thermally Stimulated Current Spectroscopy (TSC). The tensile properties and Tg of the HPMC films were determined by texture analysis and DSC, respectively. Molecular mobilities detected by TSC were cooperative and occurred at temperatures (Tg’) well below (113 to 127 °C) the bulk Tg. The relaxation times (τ) were 71 ± 1, 46 ± 1, 42 ± 1, 36 ± 1 and 29 ± 1 s for HPMC films containing 0, 6, 8, 11 and 17 % (w/w) PEG, respectively. The Tg and glassy state molecular mobility were found to be intimately linked and demonstrated a linear dependence. While tensile strength was found to be linearly related to molecular relaxation time, tensile elongation and elastic modulus exhibited a non-linear dependence on molecular mobility. The data presented in this work demonstrates the complex nature of the relationship between plasticizer content, molecular mobility, Tg and tensile properties for plasticized polymeric films. It highlights the fact that the dependence of the bulk physico-mechanical properties on glassy state molecular mobility, differ greatly. Therefore, empirical characterization of molecular mobility is important to fully understand and predict the thermo-mechanical behavior of plasticized polymer films. This work demonstrates the unique capability of TSC to provide key information relating to molecular mobility and its influence on the bulk properties of materials. Data generated using TSC could prove useful for stability and performance ranking, in addition to the ability to predict materials behavior using data generated at or below typical storage conditions in the pharmaceutical, food, and polymer industries

Comparison of DC Bead-irinotecan and DC Bead-topotecan drug eluting beads for use in locoregional drug delivery to treat pancreatic cancer

DC Bead is a drug delivery embolisation system that can be loaded with doxorubicin or irinotecan for the treatment of a variety of liver cancers. In this study we demonstrate that the topoisomerase I inhibitor topotecan hydrochloride can be successfully loaded into the DC Bead sulfonate-modified polyvinyl alcohol hydrogel matrix, resulting in a sustained-release drug eluting bead (DEBTOP) useful for therapeutic purposes. The in vitro drug loading capacity, elution characteristics and the effects on mechanical properties of the beads are described with reference to our previous work with irinotecan hydrochloride (DEBIRI). Results showed that drug loading was faster when the solution was agitated compared to static loading and a maximum loading of ca. 40–45 mg topotecan in 1 ml hydrated beads was achievable. Loading the drug into the beads altered the size, compressibility moduli and colour of the bead. Elution was shown to be reliant on the presence of ions to perform the necessary exchange with the electrostatically bound topotecan molecules. Topotecan was shown by MTS assay to have an IC50 for human pancreatic adenocarcinoma cells (PSN-1) of 0.22 and 0.27 lM compared to 28.1 and 19.2 lM for irinotecan at 48 and 72 h, respectively. The cytotoxic efficacy of DEBTOP on PSN-1 was compared to DEBIRI. DEPTOP loaded at 6 & 30 mg ml-1, like its free drug form, was shown to be more potent than DEBIRI of comparable doses at 24, 48 & 72 h using a slightly modified MTS assay. Using a PSN-1 mouse xenograft model, DEBIRI doses of 3.3–6.6 mg were shown to be well tolerated (even with repeat administration) and effective in reducing the tumour size. DEBTOP however, was lethal after 6 days at doses of 0.83–1.2 mg but demonstrated reasonable efficacy and tolerability (again with repeat injection possible) at 0.2–0.4 mg doses. Care must therefore be taken when selecting the dose of topotecan to be loaded into DC Bead given its greater potency and potential toxicity

pH-Responsive Hydrogel Beads Based on Alginate, k-Carrageenan and Poloxamer for enhanced curcumin, natural bioactive compound, encapsulation and controlled release efficiency

Polyphenolic compounds are used for treating various diseases due to their antioxidant and anticancer properties. However, utilization of hydrophobic compounds is limited due to their low bioavailability. In order to achieve a greater application of hydrophobic bioactive compounds, hydrogel beads based on biopolymers can be used as carriers for their enhanced incorporation and controlled delivery. In this study, beads based on the biopolymers-k-carrageenan, sodium alginate and poloxamer 407 were prepared for encapsulation of curcumin. The prepared beads were characterized using IR, SEM, TGA and DSC. The curcumin encapsulation efficiency in the developed beads was 95.74 +/- 2.24%. The release kinetics of the curcumin was monitored in systems that simulate the oral delivery (pH 1.2 and 7.4) of curcumin. The drug release profiles of the prepared beads with curcumin indicated that the curcumin release was significantly increased compared with the dissolution of curcumin itself. The cumulative release of curcumin from the beads was achieved within 24 h, with a final release rate of 12.07% (gastric fluid) as well as 81.93% (intestinal fluid). Both the in vitro and in vivo studies showed that new hydrogel beads based on carbohydrates and poloxamer improved curcumin’s bioavailability, and they can be used as powerful carriers for the oral delivery of different hydrophobic nutraceuticals