28 research outputs found

    Strengthening International Nuclear Forensic Capabilities Through Collaborative Science In Ukraine STRENGTHENING INTERNATIONAL NUCLEAR FORENSIC CAPABILITIES THROUGH COLLABORATIVE SCIENCE IN UKRAINE

    No full text
    ABSTRACT Globally, the production, transport and storage of nuclear materials have led to serious concerns over illegal trafficking of such materials. Ukraine stands at one of the geographical crossroads of such activities, and contains the largest uranium ore reserves in Europe. Moreover, Ukraine retains significant waste from Soviet-era uranium production and enrichment activities, as well as radioactive materials accumulated from the Chernobyl catastrophe. Lawrence Livermore National Laboratories (LLNL), with support through NA-242, has initiated multiple cooperative efforts within Ukraine, engaging some of the best Ukrainian scientists and institutions in nuclear forensic science. Nuclear forensics serves as a vehicle for scientific collaborations between the Ukrainian and United States governments, strengthening the response and core capabilities of Ukraine, who is also taking an active role as the regional leader in nuclear forensics, and additionally contributing to further engagements between respective governments. These collaborations are being supported through the Department of Energy, NA-242 GIPP (Global Initiatives for Proliferation Prevention) and CBM (Confidence Building Measures) programs, and serve to enhance nuclear forensics capabilities for Ukraine and neighboring countries, as well as in the United States. INTRODUCTION Ukraine stands at a geographical and geopolitical crossroads for illicit trafficking of nuclear materials, possessing the largest uranium ore reserves in Europe, as well as retaining significant waste from Soviet-era uranium production and enrichment activities, and radioactive materials accumulated from the Chernobyl catastrophe. Additionally, Ukraine supports a large uranium mining industry founded on a diverse set of geological settings and employing multiple uranium mining technologies, from open-pit to leach field mining. According to the illicit trafficking database maintained by the International Atomic Energy Agency (IAEA) [1,2], over the past two decades, more than one thousand cases have been confirmed by States Points of Contact, about 25% of which involved nuclear materials. Interdictions on nuclear materials, including samples consistent with origins in the former Soviet Unio

    Accurate measurement of the standard 235U(n,f) cross section from thermal to 170 keV neutron energy

    No full text
    An accurate measurement of the 235U(n,f) cross section from thermal to 170 keV of neutron energy has recently been performed at n_TOF facility at CERN using 6Li(n,t)4He and 10B(n,α)7Li as references. This measurement has been carried out in order to investigate a possible overestimation of the 235U fission cross section evaluation provided by most recent libraries between 10 and 30 keV. A custom experimental apparatus based on in-beam silicon detectors has been used, and a Monte Carlo simulation in GEANT4 has been employed to characterize the setup and calculate detectors efficiency. The results evidenced the presence of an overestimation in the interval between 9 and 18 keV and the new data may be used to decrease the uncertainty of 235U(n,f) cross section in the keV region

    First 80Se(n,γ) cross section measurement with high resolution in the full stellar energy range 1 eV - 100 keV and its astrophysical implications for the s-process

    No full text

    The 154Gd neutron capture cross section measured at the n_TOF facility and its astrophysical implications

    No full text
    The (n, γ) cross sections of the gadolinium isotopes play an important role in the study of the stellar nucleosynthesis. In particular, among the isotopes heavier than Fe, 154Gd together with 152Gd have the peculiarity to be mainly produced by the slow capture process, the so-called s-process, since they are shielded against the β-decay chains from the r-process region by their stable samarium isobars. Such a quasi pure s-process origin makes them crucial for testing the robustness of stellar models in galactic chemical evolution (GCE). According to recent models, the 154Gd and 152Gd abundances are expected to be 15-20% lower than the reference un-branched s-process 150Sm isotope. The close correlation between stellar abundances and neutron capture cross sections prompted for an accurate measurement of 154Gd cross section in order to reduce the uncertainty attributable to nuclear physics input and eventually rule out one of the possible causes of present discrepancies between observation and model predictions. To this end, the neutron capture cross section of 154Gd was measured in a wide neutron energy range (from thermal up to some keV) with high resolution in the first experimental area of the neutron time-of-flight facility n_TOF (EAR1) at CERN. In this contribution, after a brief description of the motivation and of the experimental setup used in the measurement, the preliminary results of the 154Gd neutron capture reaction as well as their astrophysical implications are presented

    First results of the 241Am(n,f) cross section measurement at the Experimental Area 2 of the n_TOF facility at CERN

    No full text
    Feasibility, design and sensitivity studies on innovative nuclear reactors that could address the issue of nuclear waste transmutation using fuels enriched in minor actinides, require high accuracy cross section data for a variety of neutron-induced reactions from thermal energies to several tens of MeV. The isotope 241Am (T1/2= 433 years) is present in high-level nuclear waste (HLW), representing about 1.8 % of the actinide mass in spent PWR UOx fuel. Its importance increases with cooling time due to additional production from the β-decay of 241Pu with a half-life of 14.3 years. The production rate of 241 Am in conventional reactors, including its further accumulation through the decay of 241Pu and its destruction through transmutation/incineration are very important parameters for the design of any recycling solution. In the present work, the 241 Am(n,f) reaction cross-section was measured using Micromegas detectors at the Experimental Area 2 of the n_TOF facility at CERN. For the measurement, the 235U(n,f) and 238U(n,f) reference reactions were used for the determination of the neutron flux. In the present work an overview of the experimental setup and the adopted data analysis techniques is given along with preliminary results

    Monte Carlo simulations and n-p differential scattering data measured with Proton Recoil Telescopes

    No full text
    The neutron-induced fission cross section of 235U, a standard at thermal energy and between 0.15 MeV and 200 MeV, plays a crucial role in nuclear technology applications. The long-standing need of improving cross section data above 20 MeV and the lack of experimental data above 200 MeV motivated a new experimental campaign at the n_TOF facility at CERN. The measurement has been performed in 2018 at the experimental area 1 (EAR1), located at 185 m from the neutron-producing target (the experiment is presented by A. Manna et al. in a contribution to this conference). The 235U(n,f) cross section from 20 MeV up to about 1 GeV has been measured relative to the 1H(n,n)1H reaction, which is considered the primary reference in this energy region. The neutron flux impinging on the 235U sample (a key quantity for determining the fission events) has been obtained by detecting recoil protons originating from n-p scattering in a C2H4 sample. Two Proton Recoil Telescopes (PRT), consisting of several layers of solid-state detectors and fast plastic scintillators, have been located at proton scattering angles of 25.07° and 20.32°, out of the neutron beam. The PRTs exploit the ΔE-E technique for particle identification, a basic requirement for the rejection of charged particles from neutron-induced reactions in carbon. Extensive Monte Carlo simulations were performed to characterize proton transport through the different slabs of silicon and scintillation detectors, to optimize the experimental set-up and to deduce the efficiency of the whole PRT detector. In this work we compare measured data collected with the PRTs with a full Monte Carlo simulation based on the Geant-4 toolkit
    corecore