Synthesis of Periclase Phase (MgO) from Colloidal Cassava Starch Suspension, Dual Application: Cr(III) Removal and Pigment Reuse

peer reviewedThis study aimed to synthesize magnesium oxide (MgO) using a colloidal starch method for two primary purposes: the removal of chromium (III) ions from synthetic wastewater and the subsequent use of the chromium-containing material as synthetic inorganic pigments (SIPs) in commercial paints. The synthesis used to obtain the oxide (St-MgO) is a promising method for using plants, such as cassava, as green fuels due to their abundance, low cost, and non-toxicity. With this, the oxide showed greater porosity and alkalinity, compared to commercial magnesium oxide (Cm-MgO). The MgO samples were subjected to structural characterization using XRD and FTIR, surface area and pore volume study by B.E.T. and SEM, and chemical composition by ICP-OES and thermogravimetric analysis (TGA). The crystalline periclase phase was identified for both samples, but the brucite phase was shown to be a secondary phase for the commercial sample. After the removal of chromium ions, the brucite crystalline phase became the majority phase for the samples, regardless of the concentration of ions removed. The pigments were characterized by color measurements and discussed in terms of colorimetric parameters using the CIELab method and electron spectroscopy (VIS-NIR). This study also evaluated the colorimetric stability of green pigments in aggressive environments (acidic and alkaline) over a 240 h exposure period, demonstrating minimal color difference. This study aims to develop materials for the decontamination of wastewater containing chromium and its reuse as a synthetic inorganic pigment, using an innovative and sustainable synthesis method

Synthesis of Periclase Phase (MgO) from Colloidal Cassava Starch Suspension, Dual Application: Cr(III) Removal and Pigment Reuse

This study aimed to synthesize magnesium oxide (MgO) using a colloidal starch method for two primary purposes: the removal of chromium (III) ions from synthetic wastewater and the subsequent use of the chromium-containing material as synthetic inorganic pigments (SIPs) in commercial paints. The synthesis used to obtain the oxide (St-MgO) is a promising method for using plants, such as cassava, as green fuels due to their abundance, low cost, and non-toxicity. With this, the oxide showed greater porosity and alkalinity, compared to commercial magnesium oxide (Cm-MgO). The MgO samples were subjected to structural characterization using XRD and FTIR, surface area and pore volume study by B.E.T. and SEM, and chemical composition by ICP-OES and thermogravimetric analysis (TGA). The crystalline periclase phase was identified for both samples, but the brucite phase was shown to be a secondary phase for the commercial sample. After the removal of chromium ions, the brucite crystalline phase became the majority phase for the samples, regardless of the concentration of ions removed. The pigments were characterized by color measurements and discussed in terms of colorimetric parameters using the CIELab method and electron spectroscopy (VIS-NIR). This study also evaluated the colorimetric stability of green pigments in aggressive environments (acidic and alkaline) over a 240 h exposure period, demonstrating minimal color difference. This study aims to develop materials for the decontamination of wastewater containing chromium and its reuse as a synthetic inorganic pigment, using an innovative and sustainable synthesis method