Design of organic Rankine cycles using a non-conventional optimization approach

The organic Rankine cycle is a suitable technology for utilizing low grade heat for electricity production. Compared to the traditional steam Rankine cycle, the organic Rankine cycle is beneficial, since it enables the choice of a working fluid which performs better than steam at low heat input temperatures and at lowpower outputs. Selecting the process layout of the organic Rankine cycle and the working fluid are two key design decisions which are critical for the thermodynamic and economic performance of the cycle. The prevailing approach used in the design and optimization of organic Rankine cycles is to model the heatexchangers by assuming a fixed minimum temperature difference. The objective of this work is to assess the applicability of this conventional optimization approach and a non-conventional optimization approach. In thenon-conventional optimization approach a total UA-value (the product of the overall heat transfer coefficient and the heat transfer area) is assigned to the cycle, while the distribution of this total UA-value to each of the heat exchangers is optimized. Optimizations are carried out for three different marine engine waste heatsources at temperatures ranging from 90 °C to 285 °C. The results suggest that the conventional optimization approach is not suitable for estimating the performance potential when the temperature profiles in the heat exchangers are closely matched. This is exemplified for the fluid MDM where the temperature profile of preheating aligns with the heat source fluid and for the zeotropic mixture R32/R134a where the temperature profile of condensation aligns with the cooling water. Furthermore, the conventional optimization approach shows weaknesses in evaluating the feasibility of using a recuperator, when the expander outlet temperature is high. In these cases the non-conventional optimization approach is the more suited methodology for designing organic Rankine cycles

Second Overtone Pulsators Among Delta Scuti Stars

We investigate the modal stability of stellar models at masses and luminosity levels corresponding to post main sequence luminous delta scuti pulsators. The envelope models have been computed at fixed mass value, luminosity level and chemical composition (Y=0.28, Z=0.02). According to a nonlinear approach to radial oscillations the present investigation predicts the occurrence of stable second overtone pulsators for the first time. The shape of both light and velocity curves are presented and discussed, providing a useful tool for the identification of second overtone pulsators among the known groups of radially pulsating stars. The period ratios of mixed mode pulsators obtained by perturbing the first and the second overtone radial eigenfunctions are in agreement with observative values. Finally, the physical structure and the dynamical properties of second overtone pulsators are discussed in detail. The role played by the nodal lines in the destabilization of second overtone pulsators is also pointed out.Comment: 20 pages, 11 Postscript figures, uses aaspp4.sty and tighten.st

Cepheid Mass-loss and the Pulsation -- Evolutionary Mass Discrepancy

I investigate the discrepancy between the evolution and pulsation masses for Cepheid variables. A number of recent works have proposed that non-canonical mass-loss can account for the mass discrepancy. This mass-loss would be such that a 5Mo star loses approximately 20% of its mass by arriving at the Cepheid instability strip; a 14Mo star, none. Such findings would pose a serious challenge to our understanding of mass-loss. I revisit these results in light of the Padova stellar evolutionary models and find evolutionary masses are ($17\pm5$)% greater than pulsation masses for Cepheids between 5<M/Mo<14. I find that mild internal mixing in the main-sequence progenitor of the Cepheid are able to account for this mass discrepancy.Comment: 15 pages, 3 figures, ApJ accepte

Next-generation sequencing of AV nodal reentrant tachycardia patients identifies broad spectrum of variants in ion channel genes.

Atrioventricular nodal reentry tachycardia (AVNRT) is the most common form of regular paroxysmal supraventricular tachycardia. This arrhythmia affects women twice as frequently as men, and is often diagnosed in patients <40 years of age. Familial clustering, early onset of symptoms and lack of structural anomaly indicate involvement of genetic factors in AVNRT pathophysiology. We hypothesized that AVNRT patients have a high prevalence of variants in genes that are highly expressed in the atrioventricular conduction axis of the heart and potentially involved in arrhythmic diseases. Next-generation sequencing of 67 genes was applied to the DNA profile of 298 AVNRT patients and 10 AVNRT family members using HaloPlex Target Enrichment System. In total, we identified 229 variants in 60 genes; 215 missenses, four frame shifts, four codon deletions, three missense and splice sites, two stop-gain variants, and one start-lost variant. Sixty-five of these were not present in the Exome Aggregation Consortium (ExAC) database. Furthermore, we report two AVNRT families with co-segregating variants. Seventy-five of 284 AVNRT patients (26.4%) and three family members to different AVNRT probands had one or more variants in genes affecting the sodium handling. Fifty-four out of 284 AVNRT patients (19.0%) had variants in genes affecting the calcium handling of the heart. We furthermore find a large proportion of variants in the HCN1-4 genes. We did not detect a significant enrichment of rare variants in the tested genes. This could be an indication that AVNRT might be an electrical arrhythmic disease with abnormal sodium and calcium handling

DFM synthesis approach based on product-process interface modelling. Application to the peen forming process.

Engineering design approach are curently CAD-centred design process. Manufacturing information is selected and assessed very late in the design process and above all as a reactive task instead of being proactive to lead the design choices. DFM appraoches are therefore assesment methods that compare several design alternatives and not real design approaches at all. Main added value of this research work concerns the use of a product-process interface model to jointly manage both the product and the manufacturing data in a proactive DFM way. The DFM synthesis approach and the interface model are presented via the description of the DFM software platform