98,957 research outputs found
Semiconductor electrolyte photovoltaic energy converter
Feasibility and practicality of a solar cell consisting of a semiconductor surface in contact with an electrolyte are evaluated. Basic components and processes are detailed for photovoltaic energy conversion at the surface of an n-type semiconductor in contact with an electrolyte which is oxidizing to conduction band electrons. Characteristics of single crystal CdS, GaAs, CdSe, CdTe and thin film CdS in contact with aqueous and methanol based electrolytes are studied and open circuit voltages are measured from Mott-Schottky plots and open circuit photo voltages. Quantum efficiencies for short circuit photo currents of a CdS crystal and a 20 micrometer film are shown together with electrical and photovoltaic properties. Highest photon irradiances are observed with the GaAs cell
V/STOL aircraft and fluid dynamics
The impact of military applications on rotorcraft and V/STOL aircraft design is summarized with respect to fixed-wing aircraft. The influence of the mission needs on the configurational design of V/STOL aircraft, the implications regarding some problems in fluid dynamics relating to propulsive flows, and their interaction with the aircraft and the ground plane, are also considered. Additional research in fluid dynamics that can contribute to an improvement in performance of V/STOL aircraft is suggested
User's manual for three dimensional boundary layer (BL3-D) code
An assessment has been made of the applicability of a 3-D boundary layer analysis to the calculation of heat transfer, total pressure losses, and streamline flow patterns on the surface of both stationary and rotating turbine passages. In support of this effort, an analysis has been developed to calculate a general nonorthogonal surface coordinate system for arbitrary 3-D surfaces and also to calculate the boundary layer edge conditions for compressible flow using the surface Euler equations and experimental data to calibrate the method, calculations are presented for the pressure endwall, and suction surfaces of a stationary cascade and for the pressure surface of a rotating turbine blade. The results strongly indicate that the 3-D boundary layer analysis can give good predictions of the flow field, loss, and heat transfer on the pressure, suction, and endwall surface of a gas turbine passage
The Infrared and Radio Fluxes Densities of Galactic HII Regions
We derive infrared and radio flux densities of all ~1000 known Galactic HII
regions in the Galactic longitude range 17.5 < l < 65 degree. Our sample comes
from the Wide-Field Infrared Survey Explorer (WISE) catalog of Galactic \hii
regions \citep{anderson2014}. We compute flux densities at six wavelengths in
the infrared (GLIMPSE 8 microns, WISE 12 microns and 22 microns, MIPSGAL 24
microns, and Hi-GAL 70 microns and 160 microns) and two in the radio (MAGPIS 20
cm and VGPS 21 cm). All HII region infrared flux densities are strongly
correlated with their ~20 cm flux densities. All HII regions used here,
regardless of physical size or Galactocentric radius, have similar infrared to
radio flux density ratios and similar infrared colors, although the smallest
regions (pc), have slightly elevated IR to radio ratios. The colors
and , and and reliably select
HII regions, independent of size. The infrared colors of ~22 of HII
regions, spanning a large range of physical sizes, satisfy the IRAS color
criteria of \citet{wood1989} for HII regions, after adjusting the criteria to
the wavelengths used here. Since these color criteria are commonly thought to
select only ultra-compact HII regions, this result indicates that the true
ultra-compact HII region population is uncertain. Comparing with a sample of IR
color indices from star-forming galaxies, HII regions show higher
ratios. We find a weak trend of
decreasing infrared to ~20 cm flux density ratios with increasing , in
agreement with previous extragalactic results, possibly indicating a decreased
dust abundance in the outer Galaxy.Comment: 27 pages, 16 figures, 5 table
A DRY MATTER QUALITY APPROACH TO PLANNING FORAGE-BEEF SYSTEMS
Livestock Production/Industries,
Influence of pressure driven secondary flows on the behavior of turbofan forced mixers
A finite difference procedure was developed to analyze the three dimensional subsonic turbulent flows in turbofan forced mixer nozzles. The method is based on a decomposition of the velocity field into primary and secondary flow components which are determined by solution of the equations governing primary momentum, secondary vorticity, thermal energy, and continuity. Experimentally, a strong secondary flow pattern was identified which is associated with the radial inflow and outflow characteristics of the core and fan streams and forms a very strong vortex system aligned with the radial interface between the core and fan regions. A procedure was developed to generate a similar generic secondary flow pattern in terms of two constants representing the average radial outflow or inflow in the core and fan streams as a percentage of the local streamwise velocity. This description of the initial secondary flow gave excellent agreement with experimental data. By identifying the nature of large scale secondary flow structure and associating it with characteristic mixer nozzle behavior, it is felt that the cause and effect relationship between lobe design and nozzle performance can be understood
Factors which influence the behavior of turbofan forced mixer nozzles
A finite difference procedure was used to compute the mixing for three experimentally tested mixer geometries. Good agreement was obtained between analysis and experiment when the mechanisms responsible for secondary flow generation were properly modeled. Vorticity generation due to flow turning and vorticity generated within the centerbody lobe passage were found to be important. Results are presented for two different temperature ratios between fan and core streams and for two different free stream turbulence levels. It was concluded that the dominant mechanisms in turbofan mixers is associated with the secondary flows arising within the lobe region and their development within the mixing section
Quantum Cosmological Relational Model of Shape and Scale in 1-d
Relational particle models are useful toy models for quantum cosmology and
the problem of time in quantum general relativity. This paper shows how to
extend existing work on concrete examples of relational particle models in 1-d
to include a notion of scale. This is useful as regards forming a tight analogy
with quantum cosmology and the emergent semiclassical time and hidden time
approaches to the problem of time. This paper shows furthermore that the
correspondence between relational particle models and classical and quantum
cosmology can be strengthened using judicious choices of the mechanical
potential. This gives relational particle mechanics models with analogues of
spatial curvature, cosmological constant, dust and radiation terms. A number of
these models are then tractable at the quantum level. These models can be used
to study important issues 1) in canonical quantum gravity: the problem of time,
the semiclassical approach to it and timeless approaches to it (such as the
naive Schrodinger interpretation and records theory). 2) In quantum cosmology,
such as in the investigation of uniform states, robustness, and the qualitative
understanding of the origin of structure formation.Comment: References and some more motivation adde
- …