Effect of calcination time on the physicochemical properties and photocatalytic performance of carbon and nitrogen co-doped TiO2 nanoparticles

The application of highly active nano catalysts in advanced oxidation processes (AOPs) improves the production of non-selective hydroxyl radicals and co-oxidants for complete remediation of polluted water. This study focused on the synthesis and characterisation of a highly active visible light C–N-co-doped TiO2 nano catalyst that we prepared via the sol-gel method and pyrolysed at 350 ◦C for 105 min in an inert atmosphere to prevent combustion of carbon moietie

Effect of deep cryogenic treatment on corrosion behavior of AISI H13 die steel

AISI H13 die steel specimens were subjected to heating at 1020 °C followed by oil quenching and double tempering at 520 °C. Subsequently, these specimens were subjected to deep cryogenic treatment at −185 °C in liquid nitrogen environment for 16 h and then subjected to soft tempering at 100 °C once the specimens attained room temperature. Thereafter, the specimens were subjected to scanning electron microscopy (SEM) analysis and electron backscatter diffraction (EBSD) analysis. The electrochemical corrosion activity was investigated in 3.5% NaCl at 23 ± 0.5 °C by evaluating the evolution of open circuit potential over time and potentiodynamic curves, and electrochemical impedance spectroscopy study was also carried out. The heat-treated specimens exhibited better resistance to corrosion through more electropositive values of open circuit potential. This could be attributed to lower grain boundary area in heat-treated specimens as compared to 16 h cryogenically treated specimen as higher grain boundary areas behave as an anode in an electrochemical cell, thereby enhancing the rate of corrosion. According to electrochemical tests, the cryogenically treated surface is more resistant to corrosion, followed by heated alloy. However, both surface modification treatments improved the corrosion behavior of the untreated alloy

Optical Properties and Stability of Copper Thin Films for Transparent Thermal Heat Reflectors

The use of thin metallic layers at the thickness limit where transparency or spectral selectivity are achieved is gaining increased interest. The use of cheap and abundant materials is desirable in the attempt to avoid environment or economical costs. The use of Cu as a replacement for Ag as a heat reflector is one of the solutions that can be employed. The stability over time is a known issue, copper being prone to atmospheric oxidation and degradation. In this contribution, the stability of Cu obtained by magnetron sputtering is investigated, using both DC and HiPIMS processes for obtaining the Cu thin films. The bias voltage is used to obtain thin films with different properties, their time stability being investigated through the variation of spectrophotometric curves. The best performing thin films are evaluated in theoretical heat reflector structures, using SiNx of different qualities as dielectric layers to form the dielectric/metal/dielectric structure

Development and Evaluation of Copper Based Transparent Heat Reflectors Obtained by Magnetron Sputtering

Within the next few years climate change is likely to become a major concern for mankind. In addition, the current electronic components shortage crisis has led to an urgent need for alternative solutions in the main industry sectors (the raw materials, manufacturing, and construction industries). The current trends of research are focused on developing smart materials with functional properties, using abundant raw materials. The energy saving efforts are sustained in the glazing industries by several approaches based on dielectric-metal-dielectric multilayer structures. The use of silver to achieve a high reflectivity in near-infrared spectral range has been proposed and is already adopted as a commercially available solution. This work is focused on developing a transparent heat reflector (THR) with prefigured optical properties, using copper as a reflective layer, a material that is more abundant and cheaper than silver. The conductive copper layers obtained by the High Power Impulse Magnetron Sputtering (HiPIMS) method were interposed between two silicon nitride layers deposited by the Radio-Frequency Magnetron Sputtering (RFMS) technique. The structural, optical, and elemental composition of monolayers was investigated, qualifying each individual material for use in the multilayer structure. The time stability of films deposited on microscope glass substrates was also investigated, as an important criterion for the selection of monolayers. The obtained results revealed that the SiNx/Cu/SiNx with the Cu layer deposited by using a negative substrate bias of −100 V showed the most stable behavior over time. Optical modeling was performed to design a THR multilayer structure, which was successfully obtained experimentally. A maximum optical transparency as high as 75% in the visible range and a reflectivity of ~ 85% in near infrared spectral interval was confirmed for the experimentally obtained multilayer structures

Enhancement of the Corrosion Resistance of 304 Stainless Steel by Cr–N and Cr(N,O) Coatings

Chromium nitride and oxynitride coatings were deposited as monolayers ((Cr–N), Cr(N,O)) and bilayers (Cr–N/Cr(N,O), Cr(N,O)/Cr–N) on 304 steel substrates by reactive cathodic arc method. The coatings were characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), surface profilometry, and scratch tester. The anticorrosive properties of the coatings were assessed by electrochemical tests in 0.10 M NaCl + 1.96 M H2O2, carried out at 24 °C. Cr2N, CrN, and Cr(N,O) phases were identified in the coatings by grazing incidence X-ray diffraction (GI-XRD) measurements. The measured adhesion values ranged from 19 N to 35 N, the highest value being obtained for the bilayer with Cr(N,O) on top. Electrochemical tests showed that Cr(N,O) presence in both mono- and bilayered coatings determined the lowest damage in corrosive solution, as compared to the Cr–N coatings. This improvement was ascribed to the more compact structure, lower coatings porosity, and smoother surface

Synthesis and Characterization of Supported TiO2 Based Nano Catalysts and Application for the Removal of Water Contaminants

The occurrence of persistent organic contaminants. [...

Synthesis and Investigation of Antibacterial Activity of Thin Films Based on TiO2-Ag and SiO2-Ag with Potential Applications in Medical Environment

Multiple antibiotic resistance has now become a major obstacle to the treatment of infectious diseases. In this context, the application of nanotechnology in medicine is a promising alternative for the prevention of infections with multidrug-resistant germs. The use of silver as a powerful antibacterial agent has attracted much interest. TiO2 and SiO2 thin films enhanced with Ag particles have been developed with the aim of maintaining the transparency of the polymer films. Antibacterial activity was evaluated for a Gram-negative species-Escherichia coli-in concentrations of 105 and 104 CFU/mL in different conditions-activation by UV irradiation, single layer and double layer. Increased antibacterial efficacy of TiO2-deposited foil was found for the tests that had been exposed to UV activation. In the case of bilayer tests, the efficiency was higher compared to those in a single layer, as the contact surface between the films and the bacterial suspension increased. Films can be used as a potential method to limit bacterial growth on hospital surfaces, such as telephone screens and medical equipment, given their optimized characteristics and proven antibacterial efficacy

Mechanical, In Vitro Corrosion Resistance and Biological Compatibility of Cast and Annealed Ti25Nb10Zr Alloy

Compared to other alloys, Ti6Al4V is the most used in medicine. In recent years, concerns regarding the toxicity of Al and V elements found in the composition of Ti6Al4V have drawn the attention of the scientific community, due to the release of Al or V ions after long term exposure to human body fluids which can lead to a negative response of the human host. Based on this, the aim of the paper was to manufacture a Ti25Nb10Zr alloy consisting of biocompatible elements which can replace Ti6Al4V usage in medical applications. In order to prove that this alloy possessed improved properties, the mechanical, wear and corrosion resistance, wettability, and cell viability were performed in comparison with those of the Ti6Al4V alloy. The corrosion behavior of this new alloy in simulated body fluid (SBF) and Hank solutions is superior to that of Ti6Al4V. The cast Ti25Nb10Zr alloy has a good tribological performance in SBF, while annealed Ti25Nb10Zr alloy is better in Hank solution. Cell viability and proliferation assay after five days indicated that Ti25Nb10Zr presented a good viability and proliferation with values of approximately 7% and 10% higher, respectively, than the ones registered for pure Ti. When compared with Ti6Al4V, the obtained results for Ti25Nb10Zr indicated smaller values with 20% in the case of both tests. Overall, it can be concluded that cell proliferation and viability tests indicated that the biocompatibility of the Ti25Nb10Zr alloy is as good as pure Ti and Ti6Al4V alloy

The Characteristics of Light (TiCrAl_0.5NbCu)C_xN_y High-Entropy Coatings Deposited Using a HiPIMS/DCMS Technique

Multi-component high-entropy (TiCrAl0.5NbCu)CxNy coatings targeting applications requiring medium-to-high friction and wear-resistant surfaces were fabricated through the co-sputtering of elemental targets in an Ar + CH4 + N2 reactive atmosphere using a hybrid HiPIMS/DCMS technique. Two sets of samples were fabricated: (a) (TiCrAl0.5NbCu)Cx high-entropy carbides (HEC) and (b) (TiCrAl0.5NbCu)CxN0.13 high-entropy carbonitrides (HECN), 0 ≤ x ≤ 0.48. The structural, mechanical, tribological, and corrosion resistance properties were thoroughly investigated. The metallic sample exhibits a single BCC structure that changes to FCC via an intermediary amorphous phase through the addition of C or N to the content of the films. The crystallinity of the FCC phases is enhanced and the density of the films decreases down to 5.5 g/cm3 through increasing the carbon fraction up to 48%. The highest hardness of about 16.9 GPa and the lowest wear rate of about 5.5 × 10−6 mm3/Nm are presented by the samples with the largest carbon content, x = 0.48. We found a very good agreement between the evolution of H/E and H3/E2 parameters with carbon content and the tribological behavior of the coatings. The best corrosion resistance was presented by the low-carbon carbonitride samples, showing a charge transfer resistivity of about 3 × 108 Ω∙cm, which is more than three times larger than that of the metallic HEA. The best tribological characteristics for envisioned application were presented by (TiCrAl0.5NbCu)C0.3N0.13, showing a coefficient of friction of 0.43 and a wear rate of about 7.7 × 10−6 mm3/Nm