Higher Education for All (EFA) in Nigeria: The Promise of Open and Distance Learning (ODL)

The social implication for development of educating all citizens of a country cannot be easily quantified. Education is however, seen as an instrument per excellence by many governments the world over, for social and technological development. This paper discusses the Nigeria Government promise of Education for All (EFA), by the year 2015, following the Dakar Declaration of Education for All in the World Education Summit in Dakar, Senegal in the year 2000. It noted the yawning gap between demand for higher education in Nigeria and the average intake per year using the Joint Admission and Matriculation Board statistics for 2005 to 2009 - a five-year period. It further observed that the conventional universities, with restriction on age of entrants, and the limitations of time, infrastructure and space will not enable Nigeria to meet the target of education for all in 2015. And looking at the advantages and successes of mega universities in other and similar regions of the world, the paper draws the attention of the Nigerian Government to the problem above and suggests the use of Open and Distance Learning as an educational delivery system to reach this lofty goal of Education for All in 2015. It concludes that in doing so, Nigeria will be able to meet that aspect of the Millennial Development Goal (MDG). Keywords: Education for all, higher education, access, open and distance learning, mega universities

The Impact of the Global Financial Crisis and the Role of External and Internal Factors in Emerging Economies

This article assesses the impact of trade, capital openness and institutions on emerging economies’ output loss during the “Great Recession.” The fixed-effect estimates of an unbalanced panel of 122 emerging countries observed from 2008 to 2010 yield three main results. First, trade openness has exacerbated output loss. Second, capital openness can help mitigate the negative impact of an external shock, but this is conditional on the level of financial development. Finally, the results also point out that the interrelations between financial and institutional development affect the crisis’s severity

Scalable ion traps for quantum information processing

We report on the design, fabrication, and preliminary testing of a 150 zone array built in a `surface-electrode' geometry microfabricated on a single substrate. We demonstrate transport of atomic ions between legs of a `Y'-type junction and measure the in-situ heating rates for the ions. The trap design demonstrates use of a basic component design library that can be quickly assembled to form structures optimized for a particular experiment

Electrostatics of Gapped and Finite Surface Electrodes

We present approximate methods for calculating the three-dimensional electric potentials of finite surface electrodes including gaps between electrodes, and estimate the effects of finite electrode thickness and an underlying dielectric substrate. As an example we optimize a radio-frequency surface-electrode ring ion trap, and find that each of these factors reduces the trapping secular frequencies by less than 5% in realistic situations. This small magnitude validates the usual assumption of neglecting the influences of gaps between electrodes and finite electrode extent.Comment: 9 pages, 9 figures (minor changes

Controlling trapping potentials and stray electric fields in a microfabricated ion trap through design and compensation

Recent advances in quantum information processing with trapped ions have demonstrated the need for new ion trap architectures capable of holding and manipulating chains of many (>10) ions. Here we present the design and detailed characterization of a new linear trap, microfabricated with scalable complementary metal-oxide-semiconductor (CMOS) techniques, that is well-suited to this challenge. Forty-four individually controlled DC electrodes provide the many degrees of freedom required to construct anharmonic potential wells, shuttle ions, merge and split ion chains, precisely tune secular mode frequencies, and adjust the orientation of trap axes. Microfabricated capacitors on DC electrodes suppress radio-frequency pickup and excess micromotion, while a top-level ground layer simplifies modeling of electric fields and protects trap structures underneath. A localized aperture in the substrate provides access to the trapping region from an oven below, permitting deterministic loading of particular isotopic/elemental sequences via species-selective photoionization. The shapes of the aperture and radio-frequency electrodes are optimized to minimize perturbation of the trapping pseudopotential. Laboratory experiments verify simulated potentials and characterize trapping lifetimes, stray electric fields, and ion heating rates, while measurement and cancellation of spatially-varying stray electric fields permits the formation of nearly-equally spaced ion chains.Comment: 17 pages (including references), 7 figure

High fidelity transport of trapped-ion qubits through an X-junction trap array

We report reliable transport of 9Be+ ions through a 2-D trap array that includes a separate loading/reservoir zone and an "X-junction". During transport the ion's kinetic energy in its local well increases by only a few motional quanta and internal-state coherences are preserved. We also examine two sources of energy gain during transport: a particular radio-frequency (RF) noise heating mechanism and digital sampling noise. Such studies are important to achieve scaling in a trapped-ion quantum information processor.Comment: 4 pages, 3 figures Updated to reduce manuscript to four pages. Some non-essential information was removed, including some waveform information and more detailed information on the tra

Placing regenerators in optical networks to satisfy multiple sets of requests.

The placement of regenerators in optical networks has become an active area of research during the last years. Given a set of lightpaths in a network G and a positive integer d, regenerators must be placed in such a way that in any lightpath there are no more than d hops without meeting a regenerator. While most of the research has focused on heuristics and simulations, the first theoretical study of the problem has been recently provided in [10], where the considered cost function is the number of locations in the network hosting regenerators. Nevertheless, in many situations a more accurate estimation of the real cost of the network is given by the total number of regenerators placed at the nodes, and this is the cost function we consider. Furthermore, in our model we assume that we are given a finite set of p possible traffic patterns (each given by a set of lightpaths), and our objective is to place the minimum number of regenerators at the nodes so that each of the traffic patterns is satisfied. While this problem can be easily solved when d = 1 or p = 1, we prove that for any fixed d,p ≥ 2 it does not admit a PTASUnknown control sequence '\textsc', even if G has maximum degree at most 3 and the lightpaths have length O(d)(d). We complement this hardness result with a constant-factor approximation algorithm with ratio ln (d ·p). We then study the case where G is a path, proving that the problem is NP-hard for any d,p ≥ 2, even if there are two edges of the path such that any lightpath uses at least one of them. Interestingly, we show that the problem is polynomial-time solvable in paths when all the lightpaths share the first edge of the path, as well as when the number of lightpaths sharing an edge is bounded. Finally, we generalize our model in two natural directions, which allows us to capture the model of [10] as a particular case, and we settle some questions that were left open in [10]

Design, Fabrication, and Experimental Demonstration of Junction Surface Ion Traps

We present the design, fabrication, and experimental implementation of surface ion traps with Y-shaped junctions. The traps are designed to minimize the pseudopotential variations in the junction region at the symmetric intersection of three linear segments. We experimentally demonstrate robust linear and junction shuttling with greater than one million round-trip shuttles without ion loss. By minimizing the direct line of sight between trapped ions and dielectric surfaces, negligible day-to-day and trap-to-trap variations are observed. In addition to high-fidelity single-ion shuttling, multiple-ion chains survive splitting, ion-position swapping, and recombining routines. The development of two-dimensional trapping structures is an important milestone for ion-trap quantum computing and quantum simulations.Comment: 9 pages, 6 figure

The role of blood flow in determining the sites of atherosclerotic plaques

Atherosclerosis is a chronic inflammatory disease characterized by the accumulation of lipids and inflammatory cells along the inner walls of arteries, and is an underlying cause of cardiovascular disease. Atherosclerotic lesions develop predominantly at branches, bends, and bifurcations in the arterial tree because these sites are exposed to low or disturbed blood flow, which exerts low/oscillatory shear stress on the vessel wall. This mechanical environment alters endothelial cell physiology by enhancing inflammatory activation. In contrast, regions of the arterial tree that are exposed to uniform, unidirectional blood flow and experience high shear stress are protected from inflammation and lesion development. Shear stress is sensed by the endothelium via mechanoreceptors and is subsequently transduced into biochemical signals resulting in modulation of proinflammatory signaling pathways. In this article, we address the molecular mechanisms behind the spatial localization of vascular inflammation and atherosclerosis, with particular focus on studies by our own group of two key proinflammatory signaling pathways, the mitogen-activated protein kinase pathway and the nuclear factor-kappa-B pathway