Noise and spectral stability of deep-UV gas-filled fiber-based supercontinuum sources driven by ultrafast mid-IR pulses

Deep-UV (DUV) supercontinuum (SC) sources based on gas-filled hollow-core fibers constitute perhaps the most viable solution towards ultrafast, compact, and tunable lasers in the UV spectral region. Noise and spectral stability of such broadband sources are key parameters that define their true potential and suitability towards real-world applications. In order to investigate the spectral stability and noise levels in these fiber-based DUV sources, we generate an SC spectrum that extends from 180 nm (through phase-matched dispersive waves - DWs) to 4 {\mu}m by pumping an argon-filled hollow-core anti-resonant fiber at a wavelength of 2.45 {\mu}m. We characterize the long-term stability of the source over several days and the pulse-to-pulse relative intensity (RIN) noise of the strongest DW at 275 nm. The results indicate no sign of spectral degradation over 110 hours, but the RIN of the DW pulses at 275 nm is found to be as high as 33.3%. Numerical simulations were carried out to investigate the spectral distribution of the RIN and the results confirm the experimental measurements and that the poor noise performance is due to the RIN of the pump laser, which was hitherto not considered in numerical modelling of these sources. The results presented herein provide an important step towards an understanding of the noise mechanism underlying such complex light-gas nonlinear interactions and demonstrate the need for pump laser stabilization

Deep-UV to Mid-IR Supercontinuum Generation driven by Mid-IR Ultrashort Pulses in a Gas-filled Hollow-core Fiber

Abstract Supercontinuum (SC) generation based on ultrashort pulse compression constitutes one of the most promising technologies towards ultra-wide bandwidth, high-brightness, and spatially coherent light sources for applications such as spectroscopy and microscopy. Here, multi-octave SC generation in a gas-filled hollow-core antiresonant fiber (HC-ARF) is reported spanning from 200 nm in the deep ultraviolet (DUV) to 4000 nm in the mid-infrared (mid-IR) having an output energy of 5 μJ. This was obtained by pumping at the center wavelength of the first anti-resonant transmission window (2460 nm) with ~100 fs pulses and an injected pulse energy of ~8 μJ. The mechanism behind the extreme spectral broadening relies upon intense soliton-plasma nonlinear dynamics which leads to efficient soliton self-compression and phase-matched dispersive wave (DW) emission in the DUV region. The strongest DW is observed at 275 nm which corresponds to the calculated phase-matching wavelength of the pump. Furthermore, the effect of changing the pump pulse energy and gas pressure on the nonlinear dynamics and their direct impact on SC generation was investigated. This work represents another step towards gas-filled fiber-based coherent sources, which is set to have a major impact on applications spanning from DUV to mid-IR

3D Bending sensor combining multicore fiber with a mode-selective photonic lantern

A bending sensor is demonstrated using the combination of a mode-selective photonic lantern and a multicore fiber, for simultaneous measurements of bending direction and radius of curvature

Bending sensor combining multicore fiber with a mode-selective photonic lantern

A bending sensor is demonstrated using the combination of a mode-selective photonic lantern (PL) and a multicore fiber. A short section of three-core fiber with strongly coupled cores is used as the bend sensitive element. The supermodes of this fiber are highly sensitive to the refractive index profiles of the cores. Small bend-induced changes result in drastic changes of the supermodes, their excitation, and interference. The multicore fiber is spliced to a fewmode fiber and excites bend dependent amounts of each of the six linearly polarized (LP) modes guided in the fewmode fiber. A mode selective PL is then used to demultiplex the modes of the few-mode fiber. Relative power measurements at the single-mode PL output ports reveal a high sensitivity to bending curvature and differential power distributions according to bending direction, without the need for spectral measurements. High direction sensitivity is demonstrated experimentally as well as in numerical simulations. Relative power shifts of up to 80% have been measured at radii of approximately 20 cm, and good sensitivity was observed with radii as large as 10 m, making this sensing system useful for applications req

10-mode photonic lanterns using low-index micro structured drilling preforms

We demonstrate low mode-dependent loss 10-mode photonic lanterns using low-index micro-structured drilling preforms. The adiabaticity requirement for lantern tapering can be alleviated by the proposed solution leading to improved performances

Triple-clad photonic lanterns for mode scaling

We propose a novel triple-clad photonic lanterns for mode scaling. This novel structure alleviates the adiabatic tapering requirement for the fabrication of large photonic lanterns. A 10-mode photonic lantern with insertion losses ranging from 0.6 to 2.0 dB across all the modes and a record-low pairwise 4-dB mode-dependent loss at C-band was demonstrated.</p

Mode- and wavelength-multiplexed transmission with crosstalk mitigation using a single amplified spontaneous emission source

\u3cp\u3eWe propose to use the low-coherence property of amplified spontaneous emission (ASE) noise to mitigate optical crosstalk, such as spatial, polarization, and modal crosstalk, which currently limits the density of photonic integration and fibers for dense space-division multiplexing. High optical crosstalk tolerance can be achieved by ASE-based low-coherence matched detection, which avoids dedicated optical lasers and uses spectrally filtered ASE noise as the signal carrier and as a matched local oscillator. We experimentally demonstrate spatial and modal crosstalk reduction in multimode fiber (MMF) and realize mode- and wavelength-multiplexed transmission over 1.5-km MMF supporting three spatial modes using a single ASE source. Performance degradation due to model dispersion over MMF is experimentally investigated.\u3c/p\u3