The influence of baseline hardness and chemical composition on enamel demineralization and subsequent remineralization

Indiana University-Purdue University Indianapolis (IUPUI)BACKGROUND Several studies have reported that harder enamel with higher contents of calcium (Ca), phosphorus (P) and fluorine (F) coupled with lower contents of carbonate (C), magnesium (Mg) and nitrate (N) was found to be more resistant to demineralization. Additionally, the hardness of dental enamel was found to have a strong correlation with its chemical content. However, yet to be established is the relation between the physical and chemical structure of enamel and its response to de- and remineralizing conditions. OBJECTIVES The aims of this laboratory study were: 1) To investigate the hardness and chemical content of sound enamel and their influence on demineralization; 2) To investigate these properties in demineralized enamel and their influence on remineralization; and 3) To investigate these properties in sound enamel and their influence on remineralization. MATERIALS AND METHODS Incipient subsurface caries lesions were created in 94 bovine enamel specimens using Carbopol C907 using three demineralization times. The specimens were then pH-cycled and treated using either 367 ppm F sodium fluoride or a placebo. Knoop surface microhardness (SMH), Energy dispersive X-ray spectroscopy (EDS) and Transverse microradiography (TMR) were performed on the specimens at all stages and compared between them. TMR variables included integrated mineral loss (ΔZ), Lesion depth (L) and maximum mineral density of the surface zone (SZmax). Data were analyzed using three- and four-way ANOVA and Pearson correlation coefficients were calculated. RESULTS SMH, ΔZ, L and SZmax were significantly different among stages, demineralization times and treatment. The weight% of F at the surface was significantly affected by treatment, irrespective of demineralization time. A statistically significant moderate correlation was found between SZmax and ΔZ and SZmax and L after pH cycling. SMH also correlated weakly to moderately with TMR data. CONCLUSIONS SMH and SZmax decreased while ΔZ and L increased with increased demineralization time. Both fluoride and non-fluoride specimens were able to remineralize, which emphasizes the role of saliva in mineralization. The Ca:P ratio remained stable at various stages, indicating the stoichiometric dissolution and redeposition of minerals. The greatest deposition of F was at the surface and its increase led to an increase in SMH and SZmax. SMH values showed that harder specimens at baseline and after demineralization remained hard after demineralization and pH-cycling, respectively, although this correlation was weak. Additionally, harder lesions showed less L and ΔZ and greater SZmax. RELEVANCE This in-vitro study will help better understand the caries process and the impact of physical and chemical characteristics of enamel on de- and remineralization challenges

The influence of hardness and chemical composition on enamel demineralization and subsequent remineralization

Objectives The objectives were to investigate the hardness and chemical composition of sound, demineralized and pH-cycled bovine enamel and determine their influence on demineralization and remineralization behavior. Methods Ninety-four, 5 × 5 × 2-mm bovine enamel specimens were demineralized using three different times [(24 h (n = 33), 48 h (n = 30), 96 h (n = 31)]. The specimens were then pH-cycled using either 367 ppm F sodium fluoride or deionized water. Knoop hardness (HK) and energy-dispersive X-ray spectroscopy (measured elements: Ca, P, F, C, Mg, N) were performed at three stages (sound, after demineralization, after pH-cycling) and transverse microradiography was performed after demineralization and pH-cycling. Comparisons were determined by ANOVA. Results Results showed that HK, integrated mineral loss and lesion depth were significantly different between stages, demineralization times and treatments. The weight% of F at the surface was significantly affected by treatment, irrespective of demineralization time, while the Ca:P ratio of the enamel remained stable even after de- and remineralization protocols. The F in fluoride groups and the artificial saliva in non-fluoride groups were both able to induce enamel remineralization, indicating the protective effect of salivary pellicle against demineralization even in the absence of fluoride. Conclusions Harder specimens and those with greater surface F weight% were less susceptible to demineralization and were more likely to remineralize. However, the amount of surface Ca and P did not influence de- or remineralization behavior

The influence of baseline hardness and chemical composition on enamel demineralization and subsequent remineralization

Indiana University-Purdue University Indianapolis (IUPUI)BACKGROUND Several studies have reported that harder enamel with higher contents of calcium (Ca), phosphorus (P) and fluorine (F) coupled with lower contents of carbonate (C), magnesium (Mg) and nitrate (N) was found to be more resistant to demineralization. Additionally, the hardness of dental enamel was found to have a strong correlation with its chemical content. However, yet to be established is the relation between the physical and chemical structure of enamel and its response to de- and remineralizing conditions. OBJECTIVES The aims of this laboratory study were: 1) To investigate the hardness and chemical content of sound enamel and their influence on demineralization; 2) To investigate these properties in demineralized enamel and their influence on remineralization; and 3) To investigate these properties in sound enamel and their influence on remineralization. MATERIALS AND METHODS Incipient subsurface caries lesions were created in 94 bovine enamel specimens using Carbopol C907 using three demineralization times. The specimens were then pH-cycled and treated using either 367 ppm F sodium fluoride or a placebo. Knoop surface microhardness (SMH), Energy dispersive X-ray spectroscopy (EDS) and Transverse microradiography (TMR) were performed on the specimens at all stages and compared between them. TMR variables included integrated mineral loss (ΔZ), Lesion depth (L) and maximum mineral density of the surface zone (SZmax). Data were analyzed using three- and four-way ANOVA and Pearson correlation coefficients were calculated. RESULTS SMH, ΔZ, L and SZmax were significantly different among stages, demineralization times and treatment. The weight% of F at the surface was significantly affected by treatment, irrespective of demineralization time. A statistically significant moderate correlation was found between SZmax and ΔZ and SZmax and L after pH cycling. SMH also correlated weakly to moderately with TMR data. CONCLUSIONS SMH and SZmax decreased while ΔZ and L increased with increased demineralization time. Both fluoride and non-fluoride specimens were able to remineralize, which emphasizes the role of saliva in mineralization. The Ca:P ratio remained stable at various stages, indicating the stoichiometric dissolution and redeposition of minerals. The greatest deposition of F was at the surface and its increase led to an increase in SMH and SZmax. SMH values showed that harder specimens at baseline and after demineralization remained hard after demineralization and pH-cycling, respectively, although this correlation was weak. Additionally, harder lesions showed less L and ΔZ and greater SZmax. RELEVANCE This in-vitro study will help better understand the caries process and the impact of physical and chemical characteristics of enamel on de- and remineralization challenges

Antimicrobials in dentistry

Dental caries (decay) is caused by pathogenic bacterial species, which afflicts nearly a third of the world’s population from early childhood to old age. Treatment of tooth decay often involves the use of filling materials to restore the cavity; however, if untreated, it can cause pain, infection and eventually lead to tooth loss. Since the oral environment is colonised by many different microorganisms, bacterial biofilms can form on these filling materials, contributing to secondary caries that can eventually lead to the failure of the dental restoration. Thus, preventing the formation of bacterial biofilms is an important strategy in the management of caries, which has led to research enabling antimicrobial capabilities in dental materials. Materials and pharmaceutical sciences are in a continuous race against microbial resistance but are trying to balance between beneficial biota associated with the oral cavity, and, of course, avoiding a harmful effect on tissues is challenging. This has, therefore, stemmed a substantial interest in both preventive and restorative measures that would enable limiting the formation of secondary caries, oral microbial biofilms, and the retention of tooth mineral. Thus, innovative strategies are being explored and here we present a review with a focus on strategies that can inhibit or limit the formation of bacterial biofilms.This research received no external funding.Peer reviewe

A multi-functional dentine bonding system combining a phosphate monomer with eugenyl methacrylate

Objective: The tooth-resin composite interface is frequently associated with failure because of microbial contamination, hydrolytic and collagenolytic degradation. Thus, designing a dentine bonding system (DBS) with an intrinsically antimicrobial polymerisable monomer is of significance especially if it can be used with self-etching primers enabling resistance to degradation of the interface. Methods: Experimental adhesives were developed incorporating eugenyl methacrylate (EgMA) at concentrations of 0,10 or 20 wt%, designated as EgMA0, EgMA10 and EgMA20, respectively, for use as a two-step self-etch DBS with the functional monomer bis[2-(methacryloyloxy) ethyl] phosphate (BMEP) in the primer. The curing, thermal and wettability properties of the adhesives were determined, and hybrid layer formation was characterised by confocal laser scanning microscopy, microtensile bond strengths (µTBS) and nanoleakage by back-scattered SEM. In situ zymography was used to assess MMP inhibitory activity of the BMEP-EgMA DBS. Results: EgMA in the adhesives lowered the polymerisation exotherm and resulted in higher Tg, without negatively affecting degree of conversion. Water sorption and solubility were significantly lower with higher concentrations of EgMA in the adhesive. The formation of a distinct hybrid layer was evident from confocal images with the different adhesives, whilst EgMA20 yielded the highest µTBS post water storage challenges and lowest nanoleakage after 6 months. The experimental DBS exhibited minimal to no MMP activity at 3 months. Significance: The hydrophobic nature of EgMA and high cross-link density exerts considerable benefits in lowering water uptake and polymerisation exotherm. The application of EgMA, adhesives in conjunction with BMEP in a multi-functional self-etching DBS can resist MMP activity, hence, enhance longevity of the dentine-resin composite interface.</p

The influence of hardness and chemical composition on enamel demineralization and subsequent remineralization

Objectives The objectives were to investigate the hardness and chemical composition of sound, demineralized and pH-cycled bovine enamel and determine their influence on demineralization and remineralization behavior. Methods Ninety-four, 5 × 5 × 2-mm bovine enamel specimens were demineralized using three different times [(24 h (n = 33), 48 h (n = 30), 96 h (n = 31)]. The specimens were then pH-cycled using either 367 ppm F sodium fluoride or deionized water. Knoop hardness (HK) and energy-dispersive X-ray spectroscopy (measured elements: Ca, P, F, C, Mg, N) were performed at three stages (sound, after demineralization, after pH-cycling) and transverse microradiography was performed after demineralization and pH-cycling. Comparisons were determined by ANOVA. Results Results showed that HK, integrated mineral loss and lesion depth were significantly different between stages, demineralization times and treatments. The weight% of F at the surface was significantly affected by treatment, irrespective of demineralization time, while the Ca:P ratio of the enamel remained stable even after de- and remineralization protocols. The F in fluoride groups and the artificial saliva in non-fluoride groups were both able to induce enamel remineralization, indicating the protective effect of salivary pellicle against demineralization even in the absence of fluoride. Conclusions Harder specimens and those with greater surface F weight% were less susceptible to demineralization and were more likely to remineralize. However, the amount of surface Ca and P did not influence de- or remineralization behavior

Saudi lung cancer prevention and screening guidelines

BACKGROUND: While lung cancer is the leading cancer cause of death, it is largely preventable. Furthermore, early diagnosis enhances the chance of cure. Therefore, we developed guidelines for lung cancer prevention and early detection. METHODS: A multidisciplinary team of experts in lung cancer representing different health-care sectors was assembled based on the National Cancer Center request and in coordination with the Saudi Lung Cancer Association of Saudi Thoracic Society. The team reviewed various reliable international guidelines and the data and experience in the Kingdom and formulated guidelines that address the primary and secondary prevention approaches in lung cancer, including tobacco control, early diagnosis, and lung cancer screening. RESULTS: The team developed guidelines to assist healthcare professionals in the Kingdom manage the different aspects of lung cancer prevention. Primary prevention through tobacco control: the recommendations encourage all healthcare professionals in all practice settings to screen their patients for smoking and to provide counseling and if needed referral to smoking cessation programs for current smokers. For early diagnosis of patients with symptoms suspicions of lung cancer, it is expected standard of care to investigate, work up, and refer the patients appropriately. Mass screening of patients at high risk for developing lung cancer: the recommendations listed the program requirements, eligible patients, and algorithm to manage findings. However, the team does not recommend that national screening program be mandated or implemented for lung cancer at this stage until more data and studies provide stronger evidence to justify adopting a national program. CONCLUSIONS: Physicians can play an important role in preventing lung cancer by tobacco control and also detect lung cancer at earlier presentation. However, national mass screening programs require further study

SARS-CoV-2 vaccination modelling for safe surgery to save lives: data from an international prospective cohort study

Background: Preoperative SARS-CoV-2 vaccination could support safer elective surgery. Vaccine numbers are limited so this study aimed to inform their prioritization by modelling. Methods: The primary outcome was the number needed to vaccinate (NNV) to prevent one COVID-19-related death in 1 year. NNVs were based on postoperative SARS-CoV-2 rates and mortality in an international cohort study (surgical patients), and community SARS-CoV-2 incidence and case fatality data (general population). NNV estimates were stratified by age (18-49, 50-69, 70 or more years) and type of surgery. Best- and worst-case scenarios were used to describe uncertainty. Results: NNVs were more favourable in surgical patients than the general population. The most favourable NNVs were in patients aged 70 years or more needing cancer surgery (351; best case 196, worst case 816) or non-cancer surgery (733; best case 407, worst case 1664). Both exceeded the NNV in the general population (1840; best case 1196, worst case 3066). NNVs for surgical patients remained favourable at a range of SARS-CoV-2 incidence rates in sensitivity analysis modelling. Globally, prioritizing preoperative vaccination of patients needing elective surgery ahead of the general population could prevent an additional 58 687 (best case 115 007, worst case 20 177) COVID-19-related deaths in 1 year. Conclusion: As global roll out of SARS-CoV-2 vaccination proceeds, patients needing elective surgery should be prioritized ahead of the general population