Effects of Oily Vehicles on the Bio-availability of Orally Administered, Sodium Salicylates in Rabbit.

The bioavailability of sodium salicylate administered in aqueous, glycerin and oily vehicles was compared in rabbits. Glycerin formulation was compared with both aqueous and oily formulations using a two - way crossover test in eight rabbits, in each study. The results indicate that the oily formulation gave a lower rate of absorption and a greater extent of absorption than the other formulations. No significant difference in the rate and extent of absorption was shown between glycerin and aqueous formulations Possible reasons for the differences are discussed with particular reference to the effects of oils on the gastric emptying rate

Correction: Alhamami et al. First emergence of resistance to macrolides and tetracycline identified in Mannheimia haemolytica and Pasteurella multocida isolates from beef feedlots in Australia. Microorganisms 2021, 9, 1322

The authors wish to make the following corrections to this paper..

First Emergence of Resistance to Macrolides and Tetracycline Identified in Mannheimia haemolytica and Pasteurella multocida Isolates from Beef Feedlots in Australia

Bovine respiratory disease (BRD) causes high morbidity and mortality in beef cattle worldwide. Antimicrobial resistance (AMR) monitoring of BRD pathogens is critical to promote appropriate antimicrobial stewardship in veterinary medicine for optimal treatment and control. Here, the susceptibility of Mannheimia haemolytica and Pasteurella multicoda isolates obtained from BRD clinical cases (deep lung swabs at post-mortem) among feedlots in four Australian states (2014-2019) was determined for 19 antimicrobial agents. The M. haemolytica isolates were pan-susceptible to all tested agents apart from a single macrolide-resistant isolate (1/88; 1.1%) from New South Wales (NSW). Much higher frequencies of P. multocida isolates were resistant to tetracycline (18/140; 12.9%), tilmicosin (19/140; 13.6%), tulathromycin/gamithromycin (17/140; 12.1%), and ampicillin/penicillin (6/140; 4.6%). Five P. multocida isolates (3.6%), all obtained from NSW in 2019, exhibited dual resistance to macrolides and tetracycline, and a further two Queensland isolates from 2019 (1.4%) exhibited a multidrug-resistant phenotype to ampicillin/penicillin, tetracycline, and tilmicosin. Random-amplified polymorphic DNA (RAPD) typing identified a high degree of genetic homogeneity among the M. haemolytica isolates, whereas P. multocida isolates were more heterogeneous. Illumina whole genome sequencing identified the genes msr(E) and mph(E)encoding macrolide resistance, tet(R)-tet(H) or tet(Y) encoding tetracycline resistance, and blaROB-1 encoding ampicillin/penicillin resistance in all isolates exhibiting a corresponding resistant phenotype. The exception was the tilmicosin-resistant, tulathromycin/gamithromycin-susceptible phenotype identified in two Queensland isolates, the genetic basis of which could not be determined. These results confirm the first emergence of AMR in M. haemolytica and P. multocida from BRD cases in Australia, which should be closely monitored

Iron-modified biochar improves plant physiology, soil nutritional status and mitigates Pb and Cd-hazard in wheat (Triticum aestivum L.)

Environmental quality and food safety is threatened by contamination of lead (Pb) and cadmium (Cd) heavy metals in agricultural soils. Therefore, it is necessary to develop effective techniques for remediation of such soils. In this study, we prepared iron-modified biochar (Fe-BC) which combines the unique characteristics of pristine biochar (BC) and iron. The current study investigated the effect of pristine and iron modified biochar (Fe-BC) on the nutritional values of soil and on the reduction of Pb and Cd toxicity in wheat plants (Triticum aestivum L.). The findings of present study exhibited that 2% Fe-BC treatments significantly increased the dry weights of roots, shoots, husk and grains by 148.2, 53.2, 64.2 and 148%, respectively compared to control plants. The 2% Fe-BC treatment also enhanced photosynthesis rate, transpiration rate, stomatal conductance, intercellular CO2, chlorophyll a and b contents, by 43.2, 88.4, 24.9, 32.5, 21.4, and 26.7%, respectively. Moreover, 2% Fe-BC treatment suppressed the oxidative stress in wheat plants by increasing superoxide dismutase (SOD) and catalase (CAT) by 62.4 and 69.2%, respectively. The results showed that 2% Fe-BC treatment significantly lowered Cd levels in wheat roots, shoots, husk, and grains by 23.7, 44.5, 33.2, and 76.3%. Whereas, Pb concentrations in wheat roots, shoots, husk, and grains decreased by 46.4, 49.4, 53.6, and 68.3%, respectively. Post-harvest soil analysis showed that soil treatment with 2% Fe-BC increased soil urease, CAT and acid phosphatase enzyme activities by 48.4, 74.4 and 117.3%, respectively. Similarly, 2% Fe-BC treatment significantly improved nutrients availability in the soil as the available N, P, K, and Fe contents increased by 22, 25, 7.3, and 13.3%, respectively. Fe-BC is a viable solution for the remediation of hazardous Cd and Pb contaminated soils, and improvement of soil fertility status

A New Chemosensor Based on a Luminescent Complex for the Investigation of Some Organophosphorus Pesticides in Environmental Samples

Organophosphorus pesticides (OPPs) play a vital role in agriculture. However, their release into the environment can have serious repercussions. Therefore, the development of rapid and reliable methods for determining OPPs has received considerable attention in recent decades. Here, a new chemosensor based on a complex of vitamin B1 (vitB1) as a ligand with europium(III) ion, with a 1:2 stoichiometric ratio, was developed in solution to detect chlorfenvinphos and malathion in water samples using the luminescence method. The detection method is based on the luminescence quenching of a Eu(III)–vitamin B1 probe in solution upon increasing the concentration of chlorfenvinphos or malathion. The optimum solvent for the detection was methanol. The detection limits were 0.31 and 0.12 µM for chlorfenvinphos and malathion, respectively. According to the ratiometric method, malathion has a 13-fold higher binding affinity for the Eu(III)–(vitB1)2 complex than chlorfenvinphos. The reaction between the probe and OPPs under study was spontaneous and had a negative ΔG0. The method was successfully applied to determine chlorfenvinphos and malathion in three different water samples. Based on these studies, future work will be carried out to establish the optic fiber sensor

Residues of the Acaricides Abamectin, Hexythiazox, and Spiromesifen in Eggplant (<i>Solanum melongena</i> L.) Fruits Grown under Field Conditions in Najran, Saudi Arabia

The dissipation profiles of the acaricides abamectin, hexythiazox, and spiromesifen in the fruits of eggplant (Solanum melongena L.) grown under field conditions in Najran, Saudi Arabia, were studied. Extraction was performed with acetonitrile, and UPLC-MS/MS was used for quantification. Instead of conventional adsorbents, a 2-fold dilution of the sample extract quickly and efficiently reduced interfering co-extracts and matrix effects. The method was successfully validated according to EU regulations. The limit of quantification was set at 5 µg/kg for hexythiazox and spiromesifen and 20 µg/kg for abamectin. The mean recoveries and relative standard deviations were 88.6–98.7% and 5.2–12.4%, respectively. The method precision was evaluated at the LOQ level for each analyte and ranged from 6.7 to 15.7%, with good trueness (recovery) ranging from 85.7 to 97.2%. The matrix effect ranged from −2.2% to −4.6%, indicating negligible signal suppression. First-order kinetics were used to characterize the dissipation rates of abamectin, hexythiazox, and spiromesifen with half-lives (t1/2) of 2.11–2.42, 2.3–2.73, and 1.31–1.47 days, respectively, using the authorized and double authorized doses. Terminal residues were 0.028–0.331 mg/kg, 0.019–0.592 mg/kg, and 0.044–0.408 mg/kg, respectively, at 3, 7, and 10 days after the second treatment. According to the risk assessment results, the percentage of chronic dietary risk quotient was <100, meaning that abamectin, hexythiazox, and spiromesifen are not considered a risk to human health. The preharvest interval (PHI) should be 7, 7, and 3 days, respectively, if the authorized dose is used, and 10, 10, and 3 days, respectively, if double the authorized dose is used. The current study can be a helpful resource for the responsible and safe use of the tested acaricides on eggplant fruits

Feasibility studies and their effects on the success or failure of investment projects. “Najaf governorate as a model”

A feasibility study is considered a strategic tool, a critical principle, and an essential stage of the success of the investment project, and it is regarded as an essential point in the success or failure of the investment project. Therefore, feasibility studies are among the most critical elements of the success of investment projects. The purpose of this study is to find out the reality of the feasibility study in the various departments of the state and its impact on the success or failure of investment projects, in addition to studying, identifying, and analyzing the factors that affect the feasibility study in investment projects. In this research, 23 influential factors were collected from site surveys, interviews with engineers and experts, and previous research in the Arab world. These factors are grouped into five categories: political and legal aspects, economic and financial, consultancy, owner, and contractor. A questionnaire survey of 70 respondents was distributed among different experts. A statistical analysis was done using SPSS and Excel packages. The results accomplished from the survey revealed the significant factors that affect the feasibility study (ranked respectively), namely, the absence of a clear investment policy (86%), the existence of obstacles (85.71%), slow and complicated routine procedures (84%), lack of experience and field knowledge (82.29%), and failure to accurately meet the scientific (79.71%) These findings could help the construction professionals to improve the feasibility study and project performance in Iraq

A state-of-the-art review of the physical and durability characteristics and microstructure behavior of ultra-high-performance geopolymer concrete

This paper provides a comprehensive review of ultra-high-performance geopolymer concrete (UHPGPC), an innovative, eco-friendly, and cost-effective variant of ultra-high-performance concrete (UHPC), devised to meet the rising request for ultra-high-strength construction materials. Previous research papers have not thoroughly analyzed and compared the rheological, physical, durability, and microstructural properties of UHPGPC with UHPC. Similarly, review articles scarcely investigate UHPGPC's strength properties and microstructural behavior under high temperatures. This paper includes an assessment of the correlation between compressive strength, splitting tensile strength, and modulus of elasticity (MOE). The current study also compares chloride ion penetration test outcomes, elevated temperature, electrical resistivity, and porosity tests to evaluate durability. To analyze the microstructure of UHPGPC, the paper assesses results from Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), and Mercury Intrusion Porosimetry (MIP). The findings from the present paper suggest that UHPGPC effectively meets the ideal mechanical property specifications of UHPC. Compared to UHPC, UHPGPC displayed a higher ion passage propensity due to larger pores (>100 nm). Geopolymer technologies present a greener path for producing UHPC by consuming less energy and emitting reduced CO2. Introducing mineral fillers like silica fume impacts the mixture's flowability and increases its water needs. However, adding an optimal ratio of micro-silica as a partial substitute for granulated blast furnace slag further bolsters the strength characteristics of UHPGPC. The strength of UHPC can also be notably improved by adjusting the water-to-binder ratio, with specific ratios yielding considerable enhancements in compression strength. The selection of an alkaline activator plays a pivotal role in UHPC's heat resilience. Among them, a combination of potassium hydroxide and sodium silicate is the prime chemical activator for boosting strength performance, durability behavior, and microstructural attributes, particularly at temperatures beyond 600 °C. Eco-friendly Geopolymer Composites (EGCs) offer lower embodied energy and CO2 emissions than traditional composites, with certain components like polyvinyl alcohol fibers being key contributors to these emissions. Progress in self-healing materials is driving sustainability in construction through innovative techniques, such as bacterial applications and specific chemical reactions. The strength and workability of Engineered Geopolymer Composites are influenced by their fiber content, with certain fibers interacting weaker than others. On a microstructural level, UHPGPC has a relatively weaker structure than UHPC due to differences in pore size, but its durability is improved when reinforced with fibers