Non-Linear Digital Self-Interference Cancellation for In-Band Full-Duplex Radios Using Neural Networks

Full-duplex systems require very strong self-interference cancellation in order to operate correctly and a significant part of the self-interference signal is due to non-linear effects created by various transceiver impairments. As such, linear cancellation alone is usually not sufficient and sophisticated non-linear cancellation algorithms have been proposed in the literature. In this work, we investigate the use of a neural network as an alternative to the traditional non-linear cancellation method that is based on polynomial basis functions. Measurement results from a full-duplex testbed demonstrate that a small and simple feed-forward neural network canceler works exceptionally well, as it can match the performance of the polynomial non-linear canceler with significantly lower computational complexity.Comment: Presented at the IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC) 201

Faulty Successive Cancellation Decoding of Polar Codes for the Binary Erasure Channel

In this paper, faulty successive cancellation decoding of polar codes for the binary erasure channel is studied. To this end, a simple erasure-based fault model is introduced to represent errors in the decoder and it is shown that, under this model, polarization does not happen, meaning that fully reliable communication is not possible at any rate. Furthermore, a lower bound on the frame error rate of polar codes under faulty SC decoding is provided, which is then used, along with a well-known upper bound, in order to choose a blocklength that minimizes the erasure probability under faulty decoding. Finally, an unequal error protection scheme that can re-enable asymptotically erasure-free transmission at a small rate loss and by protecting only a constant fraction of the decoder is proposed. The same scheme is also shown to significantly improve the finite-length performance of the faulty successive cancellation decoder by protecting as little as 1.5% of the decoder.Comment: Accepted for publications in the IEEE Transactions on Communication

Faulty Successive Cancellation Decoding of Polar Codes for the Binary Erasure Channel

We study faulty successive cancellation decoding of polar codes for the binary erasure channel. To this end, we introduce a simple erasure-based fault model and we show that, under this model, polarization does not happen, meaning that fully reliable communication is not possible at any rate. Moreover, we provide numerical results for the frame erasure rate and bit erasure rate and we study an unequal error protection scheme that can significantly improve the performance of the faulty successive cancellation decoder with negligible overhead.Comment: As presented at ISITA 201

Polar Coding for the Large Hadron Collider: Challenges in Code Concatenation

In this work, we present a concatenated repetition-polar coding scheme that is aimed at applications requiring highly unbalanced unequal bit-error protection, such as the Beam Interlock System of the Large Hadron Collider at CERN. Even though this concatenation scheme is simple, it reveals significant challenges that may be encountered when designing a concatenated scheme that uses a polar code as an inner code, such as error correlation and unusual decision log-likelihood ratio distributions. We explain and analyze these challenges and we propose two ways to overcome them.Comment: Presented at the 51st Asilomar Conference on Signals, Systems, and Computers, November 201

Blind Detection of Polar Codes

Polar codes were recently chosen to protect the control channel information in the next-generation mobile communication standard (5G) defined by the 3GPP. As a result, receivers will have to implement blind detection of polar coded frames in order to keep complexity, latency, and power consumption tractable. As a newly proposed class of block codes, the problem of polar-code blind detection has received very little attention. In this work, we propose a low-complexity blind-detection algorithm for polar-encoded frames. We base this algorithm on a novel detection metric with update rules that leverage the a priori knowledge of the frozen-bit locations, exploiting the inherent structures that these locations impose on a polar-encoded block of data. We show that the proposed detection metric allows to clearly distinguish polar-encoded frames from other types of data by considering the cumulative distribution functions of the detection metric, and the receiver operating characteristic. The presented results are tailored to the 5G standardization effort discussions, i.e., we consider a short low-rate polar code concatenated with a CRC.Comment: 6 pages, 8 figures, to appear at the IEEE Int. Workshop on Signal Process. Syst. (SiPS) 201

Non-Linear Self-Interference Cancellation via Tensor Completion

Non-linear self-interference (SI) cancellation constitutes a fundamental problem in full-duplex communications, which is typically tackled using either polynomial models or neural networks. In this work, we explore the applicability of a recently proposed method based on low-rank tensor completion, called canonical system identification (CSID), to non-linear SI cancellation. Our results show that CSID is very effective in modeling and cancelling the non-linear SI signal and can have lower computational complexity than existing methods, albeit at the cost of increased memory requirements.Comment: To be presented at the 2020 Asilomar Conference for Signals, Systems, and Computer

Comparison of Polar Decoders with Existing Low-Density Parity-Check and Turbo Decoders

Polar codes are a recently proposed family of provably capacity-achieving error-correction codes that received a lot of attention. While their theoretical properties render them interesting, their practicality compared to other types of codes has not been thoroughly studied. Towards this end, in this paper, we perform a comparison of polar decoders against LDPC and Turbo decoders that are used in existing communications standards. More specifically, we compare both the error-correction performance and the hardware efficiency of the corresponding hardware implementations. This comparison enables us to identify applications where polar codes are superior to existing error-correction coding solutions as well as to determine the most promising research direction in terms of the hardware implementation of polar decoders.Comment: Fixes small mistakes from the paper to appear in the proceedings of IEEE WCNC 2017. Results were presented in the "Polar Coding in Wireless Communications: Theory and Implementation" Worksho