Review of grid codes: Ranges of frequency variation

This article contains a review of grid codes throughout the world. Although grid codes addresses many issues, only four aspects related to generator-grid interaction are the most important: ranges of frequency variation, ranges of voltage variation, fault ride through capability, reactive power capability

Mechanochemical Preparation of Slow Release Fertilizer Based on Glauconite–Urea Complexes

We investigated the mechanochemical synthesis of complex slow release fertilizers (SRF) derived from glauconite. We studied the effectiveness of the mechanical intercalation of urea into glauconite using planetary and ring mills. The potassium-nitric complex SRFs were synthesized via a mechanochemical method mixing glauconite with urea in a 3:1 ratio. The obtained composites were analyzed using X-ray diffraction analysis, scanning electron microscopy, X-ray fluorescence analysis, and infrared spectroscopy. The results show that as duration of mechanochemical activation increases, the mineralogical, chemical, and structural characteristics of composites change. Essential modifications associated with a decrease in absorbed urea and the formation of microcrystallites were observed when the planetary milling time increased from 5 to 10 min and the ring milling from 15 to 30 min. Complete intercalation of urea into glauconite was achieved by 20 min grinding in a planetary mill or 60 min in a ring mill. Urea intercalation in glauconite occurs much faster when using a planetary mill compared to a ring mill

Minerals of Rare Earth Elements in High-Phosphorus Ooidal Ironstones of the Western Siberia and Turgai Depression

The aim of this research was to study the rare earth (REE) minerals in ooidal ironstone deposits of the West Siberian basin and the Turgai depression. Authigenic minerals (monazite and cerite) were described, and their main mineral form was identified as light rare earth element phosphate (LREE-phosphate) in this study. LREE-phosphate is included in ferruginous ooids, peloids, and oncoids and forms a consistent mineral association with Fe-hydroxides (goethite and its hydrated amorphous derivatives) and Fe-rich layered silicates (Fe-illite-smectite, chamosite, berthierine). The constancy of the mineral association in two deposits of different ages indicates a general mechanism behind the formation of these minerals. LREE-phosphates (authigenic monazite) are characterized by microscopic sizes (up to 24 ?m), diverse morphology (mainly spherical or xenomorphic), and occupy spaces between the micro-cortex in ferruginous spheroids. This mineral can be found in other deposits of ooidal ironstone. According to its mineralogical and chemical characteristics, LREE-phosphate mainly belongs to the authigenic (nodular or “gray”) monazite. However, the incomplete (not 100%) correspondence of Kikuchi bands with the reference monazite does not allow its reliable identification. Based on its small size, chemical leaching or bacterial interaction is recommended to extract REE from ooidal ironstone while predicting the associated removal of phosphorus from iron ore due to its dominant phosphate mineral form. Ooidal ironstone should be considered a complex deposit and an unconventional natural type of REE ores as an example of the largest Bakchar and Lisakovsk deposits

The Formation of Authigenic Carbonates at a Methane Seep Site in the Northern Part of the Laptev Sea

Authigenic carbonates from cold seeps are unique archives for studying environmental conditions, including biogeochemical processes associated with methane-rich fluid migration through the sediment column. The aim of this research was to study major oxide, mineralogical, and stable isotopic compositions of cold-seep authigenic carbonates collected in the northern part of the Laptev Sea. These carbonates are represented by Mg-calcite with an Mg content of 2% to 8%. The ?13C values range from ?27.5‰ to ?28.2‰ Vienna Peedee belemnite (VPDB) and indicate that carbonates formed due to anaerobic oxidation of methane, most likely thermogenic in origin. The authigenic pyrite in Mg-calcite is evidence of sulfate reduction during carbonate precipitation. The ?18O values of carbonates vary from 3.5‰ to 3.8‰ VPDB. The calculated ?18Ofluid values show that pore water temperature for precipitated Mg-calcite was comparable to bottom seawater temperature. The presence of authigenic carbonate in the upper horizons of sediments suggests that the sulfate–methane transition zone is shallowly below the sediment–water interface

Depositional Conditions of Cretaceous Ironstones Deposit in the Chulym-Yenisey Basin (Western Siberia)

This study reconstructs the depositional conditions of ironstones within the Chulym-Yenisey basin and assesses the iron source. The detrital minerals of the studied deposits include quartz and feldspar. The authigenic minerals are goethite, siderite, aragonite, dolomite, calcite, apatite, barite, and pyrite. The clay components include minerals of the chlorite group (possible chamosite), nontronite, kaolinite, illite, and beidellite. Local bacterial sulfate reduction led to the formation of pyrite framboids in siltstone layers. The subsequent diagenetic iron reduction promoted the formation of chamosite from siderite. The goethite precipitation occurred in an oxidic aqueous environment. The Cretaceous continental sediments of the Ilek and Kia Formations of the Chulym-Yenisei depression consist of fine- and medium-grained, cross-stratified, poorly sorted litho-feldspatho-quartzose sandstones of fluvial channel origin alternating with bluish-gray siltstones and ironstones of floodplain-lacustrine-bog origin. Thin layers of iron-bearing rocks within siltstones formed in meromictic waters. The changes in geochemical proxies demonstrate fluctuations of paleoenvironmental conditions within the Cretaceous sequence. Siltstones and sandstones formed under humid and arid conditions, respectively. The primary iron source for sediments of the Chulym-Yenisey depression was determined as volcanogenic and igneous rocks of the Altai-Sayan mountainous region

Ooidal ironstones in the Meso-Cenozoic sequences in western Siberia: assessment of formation processes and relationship with regional and global earth processes

This study investigates the process of formation of ooidal ironstones in the Upper Cretaceous-Paleogene succession in western Siberia. The formation of such carbonate-based ironstones is a continuing problem in sedimentary geology, and in this study, we use a variety of data and proxies assembled from core samples to develop a model to explain how the ooidal ironstones formed. Research on pyrite framboids and geochemical redox proxies reveals three intervals of oceanic hypoxia during the deposition of marine ooidal ironstones in the Late Cretaceous to the Early Paleogene Bakchar ironstone deposit in western Siberia; the absence of pyrite indicates oxic conditions for the remaining sequence. While goethite formed in oxic depositional condition, chamosite, pyrite and siderite represented hypoxic seawater. Euhedral pyrite crystals form through a series of transition originating from massive aggregate followed by normal and polygonal framboid. Sediments associated with goethite-chamosite ironstones, encompassing hypoxic intervals exhibit positive cerium, negative europium, and negative yttrium anomalies. Mercury anomalies, associated with the initial stages of hypoxia, correlate with global volcanic events. Redox sensitive proxies and ore mineral assemblages of deposits reflect hydrothermal activation. Rifting and global volcanism possibly induced hydrothermal convection in the sedimentary cover of western Siberia, and released iron-rich fluid and methane in coastal and shallow marine environments. This investigation, therefore, reveals a potential geological connection between Large Igneous Provinces (LIPs), marine hypoxia, rifting and the formation of ooidal ironstones in ancient West Siberian Sea

Ooidal ironstones in the Meso-Cenozoic sequences in western Siberia: assessment of formation processes and relationship with regional and global earth processes

This study investigates the process of formation of ooidal ironstones in the Upper Cretaceous-Paleogene succession in western Siberia. The formation of such carbonate-based ironstones is a continuing problem in sedimentary geology, and in this study, we use a variety of data and proxies assembled from core samples to develop a model to explain how the ooidal ironstones formed. Research on pyrite framboids and geochemical redox proxies reveals three intervals of oceanic hypoxia during the deposition of marine ooidal ironstones in the Late Cretaceous to the Early Paleogene Bakchar ironstone deposit in western Siberia; the absence of pyrite indicates oxic conditions for the remaining sequence. While goethite formed in oxic depositional condition, chamosite, pyrite and siderite represented hypoxic seawater. Euhedral pyrite crystals form through a series of transition originating from massive aggregate followed by normal and polygonal framboid. Sediments associated with goethite-chamosite ironstones, encompassing hypoxic intervals exhibit positive cerium, negative europium, and negative yttrium anomalies. Mercury anomalies, associated with the initial stages of hypoxia, correlate with global volcanic events. Redox sensitive proxies and ore mineral assemblages of deposits reflect hydrothermal activation. Rifting and global volcanism possibly induced hydrothermal convection in the sedimentary cover of western Siberia, and released iron-rich fluid and methane in coastal and shallow marine environments. This investigation, therefore, reveals a potential geological connection between Large Igneous Provinces (LIPs), marine hypoxia, rifting and the formation of ooidal ironstones in ancient West Siberian Sea

Authigenic and Detrital Minerals in Peat Environment of Vasyugan Swamp, Western Siberia†

Studies of mineral-forming processes in modern peat bogs can shed light on metal concentrations and their cycling in similar environments, especially in geological paleoanalogs. In terms of the mineralogical and geochemical evolution of peat bog environments, the Vasyugan Swamp in Western Siberia is a unique scientific object. Twelve peat samples were collected from the Vasyugan Swamp up to the depth of 275 cm at 25 cm intervals. The studied peat deposit section is represented by oligotrophic (0-100 cm), mesotrophic (100-175 cm), and eutrophic (175-275 cm) peat, and this is underlain by basal sediments (from 275 cm). About 30 minerals were detected using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman spectroscopy. The observed minerals are divided into detrital, clay, and authigenic phases. The detrital minerals found included quartz, feldspar, ilmenite, rutile, magnetite, zircon, and monazite. When passing from basal to oligotrophic bog sediments, the clay minerals changed from illite-smectite to kaolinite. Authigenic minerals are represented by carbonates (calcite and dolomite), iron (hydro-)oxides, galena, sphalerite, pyrite, chalcopyrite, Zn-Pb-S mineral, barite, baritocelestine, celestine, tetrahedrite, cassiterite, REE phosphate, etc. The regular distribution of mineral inclusions in peat is associated with the (bio)geochemical evolution of the environment. The formation of authigenic Zn, Pb and Sb sulfides is mainly confined to anaerobic conditions that exist in the eutrophic peat and basal sediments. The maximum amount of pyrite is associated with the interval of 225-250 cm, which is the zone of transition from basal sediments to eutrophic peat. The formation of carbonate minerals and the decreasing concentration of clay in the association with local sulfide formation (galena, sphalerite, chalcopyrite, stibnite) begins above this interval. The peak of specific carbonation appears in the 125-150 cm interval of the mesotrophic peat, which is characterized by pH 4.9-4.5 of pore water. Kaolinite is the dominant clay mineral in the oligotrophic peat. Gypsum, galena, chalcopyrite, sphalerite, and relicts of carbonate are noted in association with kaolinite. Changes in oxygen concentrations are reflected in newly formed mineral associations in corresponding intervals of the peat. This can be explained by the activity of microbiological processes such as the anaerobic oxidation of methane (AOM) and bacterial sulfate reduction (BSR), expressed in specific carbonatization (100-225 cm) and sulfidization (175-250 cm), respectively

Detailed simulation of distance protection for its testing and setting

A significant part of severe accidents (blackouts) in electric power systems (EPS) is associated with incorrect operation of relay protection and automation (RPA). One of the main reasons for the incorrect actions of the RPA devices is its rough settings, which often does not correspond to the real operating conditions for specific device. An analysis of currently used methods and tools for RPA setting up, shown that they are largely relied on the guidelines of previous decennaries. Respectively modern techniques have the same drawbacks associated with accounting the processes in specific RPA and primary transducers and its errors by approximate coefficients. It is possible to solve the indicated problem with a highly detailed analysis of the operation of key elements of RPA schemes in the specific operating conditions. The obtained results allow to estimate the processes in protected objects, processing errors in instrumental current (ICT) and voltage (IVT) transformers, as well as in RPA itself. Such possibility could be achieved by the detailed RPA mathematical modeling. The combination of an adequate EPS simulator and RPA models allows configuring parameters of the RPA settings ensuring its correct operation in real EPS. The article presents result of this research for distance protection

Patterning GaSe by High-Powered Laser Beams

We report the high-powered laser modification of the chemical, physical, and structural properties of the two-dimensional (2D) van der Waals material GaSe. Our results show that contrary to expectations and previous reports, GaSe at the periphery of a high-power laser beam does not entirely decompose into Se and Ga2O3. In contrast, we find unexpectedly that the Raman signal from GaSe gets amplified around regions where it was not expected to exist. Atomic force microscopy (AFM), dielectric force microscopy (DFM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) results show that laser irradiation induces the formation of nanoparticles. Our analyses demonstrate that, except for a fraction of Ga2Se3, these nanoparticles still belong to the GaSe phase but possess different electrical and optical properties. These changes are evidenced in the increased Raman intensity attributed to the near-resonance conditions with the Raman excitation laser. The elemental analysis of nanoparticles shows that the relative selenium content increased to as much as 70% from a 50:50 value in stoichiometric GaSe. This elemental change is related to the formation of the Ga2Se3 phase identified by Raman spectroscopy at some locations near the edge. Further, we exploit the localized high-power laser processing of GaSe to induce the formation of Ag–GaSe nanostructures by exposure to a solution of AgNO3. The selective reaction of AgNO3 with laser-irradiated GaSe gives rise to composite nanostructures that display photocatalytic activity originally absent in the pristine 2D material. The photocatalytic activity was investigated by the transformation of 4-nitrobenzenethiol to its amino and dimer forms detected in situ by Raman spectroscopy. This work improves the understanding of light–matter interaction in layered systems, offering an approach to the formation of laser-induced composites with added functionality