316 research outputs found
Recommended from our members
Holoscopic 3D image depth estimation and segmentation techniques
This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonToday’s 3D imaging techniques offer significant benefits over conventional 2D imaging techniques. The presence of natural depth information in the scene affords the observer an overall improved sense of reality and naturalness. A variety of systems attempting to reach this goal have been designed by many independent research groups, such as stereoscopic and auto-stereoscopic systems. Though the images displayed by such systems tend to cause eye strain, fatigue and headaches after prolonged viewing as users are required to focus on the screen plane/accommodation to converge their eyes to a point in space in a different plane/convergence. Holoscopy is a 3D technology that targets overcoming the above limitations of current 3D technology and was recently developed at Brunel University. This work is part W4.1 of the 3D VIVANT project that is funded by the EU under the ICT program and coordinated by Dr. Aman Aggoun at Brunel University, West London, UK. The objective of the work described in this thesis is to develop estimation and segmentation techniques that are capable of estimating precise 3D depth, and are applicable for holoscopic 3D imaging system. Particular emphasis is given to the task of automatic techniques i.e. favours algorithms with broad generalisation abilities, as no constraints are placed on the setting. Algorithms that provide invariance to most appearance based variation of objects in the scene (e.g. viewpoint changes, deformable objects, presence of noise and changes in lighting). Moreover, have the ability to estimate depth information from both types of holoscopic 3D images i.e. Unidirectional and Omni-directional which gives horizontal parallax and full parallax (vertical and horizontal), respectively. The main aim of this research is to develop 3D depth estimation and 3D image segmentation techniques with great precision. In particular, emphasis on automation of thresholding techniques and cues identifications for development of robust algorithms. A method for depth-through-disparity feature analysis has been built based on the existing correlation between the pixels at a one micro-lens pitch which has been exploited to extract the viewpoint images (VPIs). The corresponding displacement among the VPIs has been exploited to estimate the depth information map via setting and extracting reliable sets of local features. ii Feature-based-point and feature-based-edge are two novel automatic thresholding techniques for detecting and extracting features that have been used in this approach. These techniques offer a solution to the problem of setting and extracting reliable features automatically to improve the performance of the depth estimation related to the generalizations, speed and quality. Due to the resolution limitation of the extracted VPIs, obtaining an accurate 3D depth map is challenging. Therefore, sub-pixel shift and integration is a novel interpolation technique that has been used in this approach to generate super-resolution VPIs. By shift and integration of a set of up-sampled low resolution VPIs, the new information contained in each viewpoint is exploited to obtain a super resolution VPI. This produces a high resolution perspective VPI with wide Field Of View (FOV). This means that the holoscopic 3D image system can be converted into a multi-view 3D image pixel format. Both depth accuracy and a fast execution time have been achieved that improved the 3D depth map. For a 3D object to be recognized the related foreground regions and depth information map needs to be identified. Two novel unsupervised segmentation methods that generate interactive depth maps from single viewpoint segmentation were developed. Both techniques offer new improvements over the existing methods due to their simple use and being fully automatic; therefore, producing the 3D depth interactive map without human interaction. The final contribution is a performance evaluation, to provide an equitable measurement for the extent of the success of the proposed techniques for foreground object segmentation, 3D depth interactive map creation and the generation of 2D super-resolution viewpoint techniques. The no-reference image quality assessment metrics and their correlation with the human perception of quality are used with the help of human participants in a subjective manner
Adopting multiview pixel mapping for enhancing quality of holoscopic 3D scene in parallax barriers based holoscopic 3D displays
The Autostereoscopic multiview 3D Display is robustly developed and widely available in commercial markets. Excellent improvements are made using pixel mapping techniques and achieved an acceptable 3D resolution with balanced pixel aspect ratio in lens array technology. This paper proposes adopting multiview pixel mapping for enhancing quality constructed holoscopic 3D scene in parallax barriers based holoscopic 3D displays achieving great results. The Holoscopic imaging technology mimics the imaging system of insects, such as the fly, utilizing a single camera, equipped with a large number of micro-lenses, to capture a scene, offering rich parallax information and enhanced 3D feeling without the need of wearing specific eyewear. In addition pixel mapping and holoscopic 3D rendering tools are developed including a custom built holoscopic 3D displays to test the proposed method and carry out a like-to-like comparison.This work has been supported by European Commission under Grant FP7-ICT-2009-4 (3DVIVANT). The authors wish to ex-press their gratitude and thanks for the support given throughout the project
Synthesis and characterization of mixed ligand complexes of 8- hydroxy quinoline and Schiff base with some metal ions
A new mixed ligand complexes have been prepared between 8- hydroxy quinoline and o-hydroxybenzylidene-1-phenyl-2,3-dimethyl-4-amino-3-pyrazolin-5-on
with Mn(II),Fe(II),Co(II),Ni(II) and Cu(II) ions . the prepared complexes were isolated and characterized by (FT-IR)and (UV-Vis) spectroscopy. Elemental analysis (C.H.N) Flame atomic absorption technique . in addition to magnetic susceptibility and conductivity measurement
Characterization of fatigue properties of 3D printed polylactic acid
The goal of this research is to determine how tiredness behavior may be measured (PLA). A To A variety of technical data sets were S-N curves were chosen and statistically re-analyzed. as described in the following section, to generate a negative reference value reverse slope also an improved tolerance limit of 106 2 failure cycles. The average effect of stress on fatigue can be indicated via administering the highest level of stress achievable during the cycle, according to experimental data examined after treatment.Furthermore stress/strength study may be effectively performed until the printing orientation seems to possess minimal influence on PLA's general tiredness behavior. carried out via taking the printing orientation into account. A homogeneous, linearly elastic polymer is described. When acceptable experimental findings are not available, the paper explains how to conduct a fatigue evaluation (with a survival probability better than 95%). The study demonstrates how to do so via utilizing standard fatigue curves with a negative-inverse regression of 5.5 and a tolerance limit (2 106 cycles to failure) equivalent to 10% of the material's maximum σ_t
Automated and reproducible cell identification in mass cytometry using neural networks
The principal use of mass cytometry is to identify distinct cell types and changes in their composition, phenotype and function in different samples and conditions. Combining data from different studies has the potential to increase the power of these discoveries in diverse fields such as immunology, oncology and infection. However, current tools are lacking in scalable, reproducible and automated methods to integrate and study data sets from mass cytometry that often use heterogenous approaches to study similar samples. To address these limitations, we present two novel developments: (1) a pre-trained cell identification model named Immunopred that allows automated identification of immune cells without user-defined prior knowledge of expected cell types and (2) a fully automated cytometry meta-analysis pipeline built around Immunopred. We evaluated this pipeline on six COVID-19 study data sets comprising 270 unique samples and uncovered novel significant phenotypic changes in the wider immune landscape of COVID-19 that were not identified when each study was analyzed individually. Applied widely, our approach will support the discovery of novel findings in research areas where cytometry data sets are available for integration
Influence of layer bonding on compressive strength of 3D printed structure: An experimental study
The impact of 3D printing parameters is critical for expanding the application of technology in the design and construction. The effect of bonding layers on the compressive strength of the material is investigated in this research by variation of the layer thickness and print speed. Cube specimens with layer thicknesses ranging from 0.05 to 0.3mm and print rates of 40mm/s, were tested on compression with the DARTEC test equipment. It was found that layer thicknesses of 0.05mm and 0.15mm have similar elastic properties while the 0.15mm layer can take additional load after initial plastic deformation. Layer thickness of 0.30mm has significantly lower elastic zone load capacity, but the stress in plastic zone continue to grow. The findings are of great importance for in explaining the S-N curve in order to enhance part manufacture
Identifying a spatial scale for the analysis of residential burglary: An empirical framework based on point pattern analysis
A key issue in the spatial and temporal analysis of residential burglary is the choice of scale: spatial patterns might differ appreciably for different time periods and vary across geographic units of analysis. Based on point pattern analysis of burglary incidents in Columbus, Ohio during a 9-year period, this study develops an empirical framework to identify a useful spatial scale and its dependence on temporal aggregation. Our analysis reveals that residential burglary in Columbus clusters at a characteristic scale of 2.2 km. An ANOVA test shows no significant impact of temporal aggregation on spatial scale of clustering. This study demonstrates the value of point pattern analysis in identifying a scale for the analysis of crime patterns. Furthermore, the characteristic scale of clustering determined using our method has great potential applications: (1) it can reflect the spatial environment of criminogenic processes and thus be used to define the spatial boundary for place-based policing; (2) it can serve as a candidate for the bandwidth (search radius) for hot spot policing; (3) its independence of temporal aggregation implies that police officials need not be concerned about the shifting sizes of risk-areas depending on the time of the year
National study of NAFLD management identifies variation in delivery of care in the UK between 2019 to 2022
Background & Aims: Non-alcoholic fatty liver disease (NAFLD) is associated with liver and cardiovascular morbidity and mortality. Recently published NAFLD Quality Standards include 11 key performance indicators (KPIs) of good clinical care. This national study, endorsed by British Association for the Study of the Liver (BASL) and British Society of Gastroenterology (BSG), aimed to benchmark NAFLD care in UK hospitals against these KPIs. Methods: This study included all new patients with NAFLD reviewed in the outpatient clinic in the months of March 2019 and March 2022. Participating UK hospitals self-registered for the study through BASL/BSG. KPI outcomes were compared using Fisher's exact or Chi-square tests. Results: Data from 776 patients with NAFLD attending 34 hospitals (England [25], Scotland [four], Wales [three], Northern Ireland [two]) were collected. A total of 85.3% of hospitals reported established local liver disease assessment pathways, yet only 27.9% of patients with suspected NAFLD had non-invasive fibrosis assessment documented at the point of referral to secondary care. In secondary care, 79.1% of patients had fibrosis assessment. Assessment of cardiometabolic risk factors including obesity, type 2 diabetes, hypertension, and smoking were conducted in 73.2%, 33.0%, 19.3%, and 54.9% of all patients, respectively. There was limited documentation of diet (35.7%) and exercise advice (55.1%). Excluding those on statins, only 9.1% of patients with NAFLD at increased cardiovascular risk (T2DM and/or QRISK-3 >10%) had documented discussion of statin treatment. Significant KPI improvements from 2019 to 2022 were evident in use of non-invasive fibrosis assessment before secondary care referral, statin recommendations, and diet and exercise recommendations. Conclusions: This national study identified substantial variation in NAFLD management in the UK with clear areas for improvement, particularly fibrosis risk assessment before secondary care referral and management of associated cardiometabolic risk factors. Impact and implications: This study identified significant variation in the management of NAFLD in the UK. Only 27.9% of patients with suspected NAFLD had non-invasive fibrosis assessment performed to identify those at greater risk of advanced liver disease before specialist referral. Greater emphasis is needed on the management of associated cardiometabolic risk factors in individuals with NAFLD. Hospitals with multidisciplinary NAFLD service provision had higher rates of fibrosis evaluation and assessment and management of cardiometabolic risk than hospitals without multidisciplinary services. Further work is needed to align guideline recommendations and real-world practice in NAFLD care.</p
Texture features extraction based on GLCM for face retrieval system
Texture features play an important role in most image retrieval techniques to obtain results of high accuracy. In this work, the face image retrieval method considering texture analysis and statistical features has been proposed. Textile features can also be extracted using the GLCM tool. In this research, the GLCM calculation method involves two phases, first: some of the previous image processing techniques work together to get the best results to determine the big object of the face image (center of face image) then, the gray level co-occurrence matrix GLCM is computed for gray face image and then some statistical texture features with second-order are extracted. In the second phase, the facial texture features are retrieved by finding the minimum distance between texture features of an unknown face image with the texture features of face images that are stored in the database system. The experimental results show that the proposed method is capable to achieve high accuracy degree in face image retrieval
Strain analysis at flat surfaces of loaded members using digital image correlation technique
This research examines the applicability of the planned Digital Image Correlation (DIC) system to measure the strains in tensile experiments. DIC is a low-cost optical technique, and is an appropriate measurement used to measure surface displacement, strain and stress map distribution without any contact with the tested surfaces. In the present research, the tensile test is conducted on two different flat samples, which are painted in a speckle pattern on the tested surface to use DIC features in stain measurements. To guarantee the efficiency of the planned DIC system, the DIC code has been built using MATLAB programming language. The obtained results from DIC technique is compared with the results from open-source software (Ncorr), the finite element analysis (ANSYS) as well as the exact and analytical solutions. The comparison results showed that there was A quite acceptable and agreement achieved between them. According to the exact solution, The percentage of accuracy of the obtained results for the Aluminum without hole plate was around (89-93) % whereas the accuracy with the NCORR was about 96 %. For the second copper plate with a central hole, the accuracy has been obtained to be (80.7-99) % with the analytical solution wherein its value has reached (81-97) % with Ncorr software
- …