Complementary metal oxide silicon integrated circuits incorporating monolithically integrated stretchable wavy interconnects

Stretchable complementary metal oxide silicon circuits consisting of ultrathin active devices mechanically and electrically connected by narrow metal lines and polymer bridging structures are presented. This layout-together with designs that locate the neutral mechanical plane near the critical circuit layers-yields strain independent electrical performance and realistic paths to circuit integration. A typical implementation reduces the strain in the silicon to less than ∼0.04% for applied strains of ∼10%. Mechanical and electrical modeling and experimental characterization reveal the underlying physics of these systems. © 2008 American Institute of Physics.

Stretchable and foldable silicon integrated circuits

We have developed a simple approach to high- performance, stretchable, and foldable integrated circuits. The systems integrate inorganic electronic materials, including aligned arrays of nanoribbons of single crystalline silicon, with ultrathin plastic and elastomeric substrates. The designs combine multilayer neutral mechanical plane layouts and "wavy" structural configurations in silicon complementary logic gates, ring oscillators, and differential amplifiers. We performed three- dimensional analytical and computational modeling of the mechanics and the electronic behaviors of these integrated circuits. Collectively, the results represent routes to devices, such as personal health monitors and other biomedical devices, that require extreme mechanical deformations during installation/ use and electronic properties approaching those of conventional systems built on brittle semiconductor wafers.

Bendable integrated circuits on plastic substrates by use of printed ribbons of single-crystalline silicon

This letter presents studies of several simple integrated circuits-n-channel metal-oxide semiconductor inverters, five-stage ring oscillators, and differential amplifiers-formed on thin, bendable plastic substrates with printed ribbons of ultrathin single-crystalline silicon as the semiconductor. The inverters exhibit gains as high as 2.5, the ring oscillators operate with oscillation frequencies between 8 and 9 MHz at low supply voltages (similar to 4 V), and the differential amplifiers show good performance and voltage gains of 1.3 for 500 mV input signals. The responses of these systems to bending-induced strains show that relatively moderate changes of individual transistors can be significant for the operation of circuits that incorporate many transistors. (c) 2007 American Institute of Physics.

ILC Reference Design Report Volume 1 - Executive Summary

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2s^-1. This report is the Executive Summary (Volume I) of the four volume Reference Design Report. It gives an overview of the physics at the ILC, the accelerator design and value estimate, the detector concepts, and the next steps towards project realization

ILC Reference Design Report Volume 4 - Detectors

This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics.This report, Volume IV of the International Linear Collider Reference Design Report, describes the detectors which will record and measure the charged and neutral particles produced in the ILC's high energy e+e- collisions. The physics of the ILC, and the environment of the machine-detector interface, pose new challenges for detector design. Several conceptual designs for the detector promise the needed performance, and ongoing detector R&D is addressing the outstanding technological issues. Two such detectors, operating in push-pull mode, perfectly instrument the ILC interaction region, and access the full potential of ILC physics

ILC Reference Design Report Volume 3 - Accelerator

The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC.The International Linear Collider (ILC) is a 200-500 GeV center-of-mass high-luminosity linear electron-positron collider, based on 1.3 GHz superconducting radio-frequency (SCRF) accelerating cavities. The ILC has a total footprint of about 31 km and is designed for a peak luminosity of 2x10^34 cm^-2 s^-1. The complex includes a polarized electron source, an undulator-based positron source, two 6.7 km circumference damping rings, two-stage bunch compressors, two 11 km long main linacs and a 4.5 km long beam delivery system. This report is Volume III (Accelerator) of the four volume Reference Design Report, which describes the design and cost of the ILC