Cosmetic and Pharmaceutic Products with Selected Natural and Synthetic Substances for Melasma Treatment and Methods of Their Analysis

Melasma is a fairly common condition that is the result of hyperpigmentation caused by increased melanin secretion. In the course of melasma, certain areas of the skin become darker than the rest of the epidermis. Although the pathogenesis remains incompletely clarified, several contributing factors have been identified, namely exposure to ultraviolet and visible light, family predisposition, pregnancy, and the use of exogenous hormones. Since current beauty standards associate healthy skin with its flawless and uniform color, people strive to eliminate any unaesthetic discoloration. Cosmetic and pharmaceutical products containing active substances with a whitening effect then become helpful. The most commonly used for this purpose are hydroquinone, arbutin, retinoids, organic acids (e.g., kojic, azelaic, and ellagic), and vitamins (B3, C, and E). However, the undesirable side effects they cause and the drive to replace synthetic chemicals with their natural counterparts have resulted in numerous reports on extracts of natural origin that exhibit skin-whitening effects. The purpose of this paper is to review the most recent scientific literature, which presents active substances of natural and synthetic origin with potential for the treatment of melasma. In addition, analytical techniques that can be used for qualitative and quantitative analysis of these substances present in cosmetic and pharmaceutical products will also be presented

KIT-5 Structural and Textural Changes in Response to Different Methods of Functionalization with Sulfonic Groups

In this project, KIT-5 materials were effectively functionalized with sulfonic groups introduced by grafting or the co-condensation method and tested as heterogeneous solid acid catalyst. A co-condensation procedure leading to the stable, –SO3H functionalized KIT-5 materials was successfully established. Moreover, the influence of both synthesis methods on the structural and textural parameters, as well as surface chemistry, morphology, and catalytic activity of –SO3H/KIT-5 materials was thoroughly investigated. The syntheses with 3-mepkaptopropyltrimethoxysilane (MPTMS) acting as a modifying agent resulted in samples in which functional groups were introduced into the structure and/or onto the mesoporous silica surface. The oxidation stage of –SH to –SO3H groups was carried out under mild conditions, using a “green” oxidant (H2O2). The application of different functionalization techniques and the introduction of different amounts of modifying agent allowed for an evaluation of the influence of these parameters on the ordering of the mesoporous structure of KIT-5 materials. The applied methods of assessment of the physicochemical parameters (XRD, low-temperature N2 sorption, TEM) showed that, especially when the co-condensation method was applied, as the number of functional groups increased, the ordering of structure characteristic of KIT-5 decreased. On the other hand, the samples modified by grafting had a stable structure, regardless of the amount of introduced MPTMS. Test reactions carried out on the basis of Friedel–Crafts alkylation process showed that the synthesized materials can be considered promising acid catalysts in heterogeneous catalysis reactions

KIT-5 Structural and Textural Changes in Response to Different Methods of Functionalization with Sulfonic Groups

In this project, KIT-5 materials were effectively functionalized with sulfonic groups introduced by grafting or the co-condensation method and tested as heterogeneous solid acid catalyst. A co-condensation procedure leading to the stable, –SO3H functionalized KIT-5 materials was successfully established. Moreover, the influence of both synthesis methods on the structural and textural parameters, as well as surface chemistry, morphology, and catalytic activity of –SO3H/KIT-5 materials was thoroughly investigated. The syntheses with 3-mepkaptopropyltrimethoxysilane (MPTMS) acting as a modifying agent resulted in samples in which functional groups were introduced into the structure and/or onto the mesoporous silica surface. The oxidation stage of –SH to –SO3H groups was carried out under mild conditions, using a “green” oxidant (H2O2). The application of different functionalization techniques and the introduction of different amounts of modifying agent allowed for an evaluation of the influence of these parameters on the ordering of the mesoporous structure of KIT-5 materials. The applied methods of assessment of the physicochemical parameters (XRD, low-temperature N2 sorption, TEM) showed that, especially when the co-condensation method was applied, as the number of functional groups increased, the ordering of structure characteristic of KIT-5 decreased. On the other hand, the samples modified by grafting had a stable structure, regardless of the amount of introduced MPTMS. Test reactions carried out on the basis of Friedel–Crafts alkylation process showed that the synthesized materials can be considered promising acid catalysts in heterogeneous catalysis reactions

Microencapsulation as a Route for Obtaining Encapsulated Flavors and Fragrances

Microencapsulation methods for active substances, such as fragrance compounds and aromas, have long been of interest to researchers. Fragrance compositions and aromas are added to cosmetics, household, and food products. This is often because the choice of a particular product is dictated by its fragrance. Fragrance compositions and aromas are, therefore, a very important part of the composition of these items. During production, when a fragrance composition or aroma is introduced into a system, unfavorable conditions often exist. High temperatures and strong mixing have a detrimental effect on some fragrance compounds. The environments of selected products, such as high- or low-pH surfactants, all affect the fragrance, often destructively. The simple storage of fragrances where they are exposed to light, oxygen, or heat also has an adverse effect. The solution to most of these problems may be the encapsulation process, namely surrounding small fragrance droplets with an inert coating that protects them from the external environment, whether during storage, transport or application, until they are in the right conditions to release the fragrance. The aim of this article was to present the possible, available and most commonly used methods for obtaining encapsulated fragrances and aromas, which can then be used in various industries. In addition, the advantages and disadvantages of each method were pointed out, so that the selection of the appropriate technology for the production of encapsulated fragrances and aromas will be simpler

Microencapsulation as a Route for Obtaining Encapsulated Flavors and Fragrances

Microencapsulation methods for active substances, such as fragrance compounds and aromas, have long been of interest to researchers. Fragrance compositions and aromas are added to cosmetics, household, and food products. This is often because the choice of a particular product is dictated by its fragrance. Fragrance compositions and aromas are, therefore, a very important part of the composition of these items. During production, when a fragrance composition or aroma is introduced into a system, unfavorable conditions often exist. High temperatures and strong mixing have a detrimental effect on some fragrance compounds. The environments of selected products, such as high- or low-pH surfactants, all affect the fragrance, often destructively. The simple storage of fragrances where they are exposed to light, oxygen, or heat also has an adverse effect. The solution to most of these problems may be the encapsulation process, namely surrounding small fragrance droplets with an inert coating that protects them from the external environment, whether during storage, transport or application, until they are in the right conditions to release the fragrance. The aim of this article was to present the possible, available and most commonly used methods for obtaining encapsulated fragrances and aromas, which can then be used in various industries. In addition, the advantages and disadvantages of each method were pointed out, so that the selection of the appropriate technology for the production of encapsulated fragrances and aromas will be simpler

Microneedles Based on a Biodegradable Polymer—Hyaluronic Acid

Transdermal transport can be challenging due to the difficulty in diffusing active substances through the outermost layer of the epidermis, as the primary function of the skin is to protect against the entry of exogenous compounds into the body. In addition, penetration of the epidermis for substances hydrophilic in nature and particles larger than 500 Da is highly limited due to the physiological properties and non-polar nature of its outermost layer, namely the stratum corneum. A solution to this problem can be the use of microneedles, which “bypass” the problematic epidermal layer by dispensing the active substance directly into the deeper layers of the skin. Microneedles can be obtained with various materials and come in different types. Of special interest are carriers based on biodegradable and biocompatible polymers, such as polysaccharides. Therefore, this paper reviews the latest literature on methods to obtain hyaluronic acid-based microneedles. It focuses on the current advancements in this field and consequently provides an opportunity to guide future research in this area

Surface Studies on Glass Powders Used in Commercial Glass-Ionomer Dental Cements

The surface properties of three commercial ionomer glass powders, i.e., Fuji IX, Kavitan Plus and Chemadent G-J-W were studied. Samples were analyzed by X-ray fluorescence spectroscopy (XRF), and the density was determined by gas pycnometry. Morphology was studied using scanning electron microscopy (SEM) and laser diffraction (LD) technique, whereas low-temperature nitrogen sorption measurements determined textural parameters like specific surface area and pore volume. Thermal transformations in the materials studied were evaluated by thermogravimetric analysis (TGA), which was carried out in an inert atmosphere between 30 °C and 900 °C. XRF showed that Fuji IX and Kavitan Plus powders were strontium-based, whereas Chemadent G-J-W powder was calcium-based. Powders all had a wide range of particle sizes under SEM and LD measurements. Specific surface areas and pore volumes were in the range 1.42–2.73 m2/g and 0.0029 to 0.0083 cm3/g, respectively, whereas densities were in the range 2.6428–2.8362 g/cm3. Thermogravimetric analysis showed that the glass powders lost mass in a series of steps, with Fuji IX powder showing the highest number, some of which are attributed to the dehydration and decomposition of the polyacrylic acid present in this powder. Mass losses were more straightforward for the other two glasses. All three powders showed distinct losses at around 780 °C and 835 °C, suggesting that similar dehydration steps occur in all these glasses. Other steps, which differed between glass powders, are attributed to variations in states of water-binding on their surfaces

Synthesis of Lipid Nanoparticles Incorporated with <i>Ferula assa-foetida</i> L. Extract

Solid Lipid Nanoparticles (SLN) have been prepared by high-pressure homogenization and optimized in order to protect ferulic acid from Ferula assa-foetida L. extract. The influence of lipid and surfactant concentration on the mean particle size (Z-Ave), polydispersity index (PDI), and zeta potential (ZP) of SLN was analyzed. In addition, other parameters for the preparation of ferulic acid-loaded nanoparticles, such as extract concentration and variable parameters for the synthesis method used (e.g., pressure), were adjusted to obtain the smallest particle size and polydispersity index, as well as the highest value for zeta potential, which are characteristic of the stable SLN. The established formulation obtained from the optimized synthesis was composed of 6.0 wt.% of the lipid phase and 1.5 wt.% of surfactant, giving stable SLN with Z-Ave, PDI, and ZP values of 163.00 ± 1.06 nm, 0.16 ± 0.01, and −41.97 ± 0.47 mV, respectively. The loading of ferulic acid from Ferula assa-foetida L. extract within the SLN resulted in particles with a mean size of 155.3 ± 1.1 nm, polydispersity index of 0.16 ± 0.01, zeta potential of −38.00 ± 1.12 mV, and encapsulation efficiency of 27%, the latter being quantified on the basis of RP-HPLC analysis. Our findings highlight the added value of SLN as a delivery system for phenolic phytochemical compounds extracted from Ferula assa-foetida L

Cosmetic product from concept in the laboratory to industrial production

Growing interest in cosmetics of the highest quality generates new trends in the cosmetics industry and the need to design new products. Today's customer expects that the cosmetic will meet the requirements appropriate to his needs, and the marketing statement on the package will be supported by relevant research. Manufacturers of cosmetic raw materials are intensively working on innovative raw materials and their forms, which will not only facilitate the design of cosmetics, but also ensure the activity of the ingredient in the cosmetic formulation. Selection of appropriate raw materials is not easy and depends not only on the effectiveness, but also on the price and technological conditions that can be provided. The popularity of natural cosmetics brings a great challenge in the design of formulations and limits the manufacturer in the selection of raw materials. Thanks to the interest in products with the highest possible index of naturalness, a lot of substitutes for synthetic substances have been created, which often do not meet the expected effectiveness and application requirements. Marketing specialists in order to encourage the purchase of a product, take care of advertising, building brand awareness in social media, while the R&D department works on technological solutions in order to introduce unique and safe cosmetics. Introducing innovations and new products is an essential element for the brand to stay on the market

Synthesis and Characterization of Hierarchical Zeolites Modified with Polysaccharides and Its Potential Role as a Platform for Drug Delivery

Hierarchical zeolites are aluminosilicates with a crystal structure, which next to the micropores possess secondary porosity in the range of mesopores and/or small macropores. Due to their ordered structure and additional secondary porosity, they have aroused great interest among scientists in recent years. Therefore, the present work concerns the synthesis and characterization of hierarchical zeolites with secondary mesoporosity, based on commercial zeolites such as MFI (ZSM-5), BEA (β) and FAU (Y), and modified with polysaccharides such as inulin, hyaluronic acid, and heparin. All materials were characterized by various analytical techniques and applied as a platform for delivery of selected drug molecules. On the basis of X-ray diffraction (presence of reflections in the 2θ angle range of 1.5–2.5°) and low-temperature nitrogen sorption isotherms (mixture of isotherms of I and IV type) additional secondary porosity was found in the mesopore range. Additional tests were also conducted to determine the possibility of loading selected molecules with biological activity into the aforementioned materials and then releasing them in the therapeutic process. Molecules with different therapeutic options were selected for testing, namely ibuprofen, curcumin, and ferulic acid with anti-inflammatory, potentially anticancer, antioxidant, and skin discoloration activities, respectively. Preliminary studies have confirmed the possibility of using hierarchical zeolites as potential carriers for bioactive molecules, as the loading percentage of active substances ranged from 39–79% and cumulative release for ibuprofen reached almost 100% after 8 h of testing