22 research outputs found

    Global Litigation, Local Judgment Enforcement

    No full text

    Stillegung und Rueckbau: Raumfahrtcomputer fuer kerntechnische Anwendungen, Verifikation der Strahlungshaerte Schlussbericht

    No full text
    (1) Employment of those radiation hard electronics which are already known in military and space applications. (2) The experience in space-flight shall be used to investigate nuclear technology areas, for example, by using space electronics to prove the range of applications in nuclear radiating environments. (3) Reproduction of a computer developed for telecommunication satellites; proof of radiation hardness by radiation tests. (4) At 328 Krad (Si) first failure of radiation tolerant devices with 100 Krad (Si) hardness guaranteed. (5) Using radiation hard devices of the same type you can expect applications at doses of greater than 1 Mrad (Si). Electronic systems applicable for radiation categories D, C and lower part of B for manipulators, vehicles, underwater robotics. (orig.)(1) Einsatz von strahlenharter Elektronik bisher bekannt fuer militaerische Zwecke und fuer die Raumfahrt. (2) Die Erfahrungen in der Raumfahrt sollen fuer die kerntechnischen Anwendungen nutzbar gemacht werden, deshalb Nachweis des Einsatzbereichs im kerntechnischen Strahlungsumfeld am Beispiel einer Raumfahrtelektronik. (3) Nachbau eines fuer Nachrichtensatelliten entwickelten Computers; Nachweis der Strahlungshaerte durch Bestrahlungstests. (4) Erster Ausfall erst bei 328 Krad (Si) bei strahlungstoleranten Bauteilen mit 100 Krad (Si) garantierter Haerte. (5) Bei Bestueckung mit strahlungsharten Bauteilen gleicher Type: Einsatz ueber 1 Megarad erwartbar. Elektronikgeraete einsetzbar fuer Strahlungskategorie D, C und unterer Bereich von B fuer Manipulatoren, Fahrzeuge, Unterwasserroboter. (orig.)Available from TIB Hannover: F95B1509+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

    Experiment- und Missionsunterstuetzung BIOLABOR auf D-2 Schlussbericht

    No full text
    Available from TIB Hannover: F96B1032 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

    Entwicklung und Erprobung von keramischen Gasturbinen-Bauteilen aus RBSN, SRBSN, HIPRBSN und SSN, hergestellt mittels Schlickerguss bzw. Schlickerdruckguss. Technischer Bericht 6

    No full text
    During the period of the report, further investigations were made in the high temperature range up to 1350 C, taking the long term behaviour into account, with the result that the strength level of HIPRBSN is still too low for use in gas turbines and the slow crack growth is too marked. Extensive experimental programmes for improving the properties of HIPRBSN are going on at present at CeramTec. The part manufacture for the production of realistic tests of the inter-diffuser internal ring for the test rigs is concluded and the erection of the test rig is being prepared. The guide grid test rig is being revised in design, with detailed solutions for 4 guide grid variants, which still have to be examined by calculation. The thermal shock test of the inter-diffuser internal ring already started during the period of the last report was continued. The component failed during the shock cycle between 530 and 1120 C, but the cause of the damage is not yet known. Stress calculations have shown that moderate stresses of 90 MPa acted in the damaged area. (orig./AKF)SIGLEAvailable from TIB Hannover: F94B1272 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Forschung und Technologie (BMFT), Bonn (Germany)DEGerman

    Entwicklung und Erprobung von keramischen Gasturbinen-Bauteilen aus RBSN, SRBSN, HIPRBSN und SSN, hergestellt mittels Schlickerguss bzw. Schlickerdruckguss. Technischer Bericht 7

    No full text
    Die Berechnungen zur optimalen Gestaltung des VT-Leitgitters wurden durch 3 Varianten ergaenzt, die im Rahmen der Triebwerksumgebung und unter Beruecksichtigung herstellungstechnischer Gesichtspunkte (Wandstaerken) konstruktiv detailliert wurden. Die Thermoschockerprobung von Zwischendiffusor-Innenringen wurde fortgesetzt. Von 4 Diffusoren versagten 3, einer ueberlebte den Schocktest. Die bruchmechanische Untersuchung eines der geschaedigten Diffusoren ergab, dass eine Bruchausgangsstelle an der Innenseite im Bereich der Randzone des Diffusor-Bodens liegt, wo nach Berechnungen Spannungen bis zu 110 MPa auftreten. Der Bruch ist nicht auf Fehlstellen im Werkstoff zurueckzufuehren. Der nach dem Thermoschock unbeschaedigte Diffusor wurde auf dem bereits frueher beschriebenen Pruefstand unter triebwerksnahen Bedingungen weiter erprobt, ein Schaden trat bisher nicht auf. Von den angelieferten gruengefraesten und nachgehipten Verdichterturbinen-Leitgittern hat eines den Thermoschock ueber 5 Stunden ohne Schaden ueberstanden. Eine weitere Erprobung auf dem triebwerksnahen Pruefstand ist nicht moeglich, da diese Leitgitter zu stark verformt sind. (orig./AKF)The calculations for the optimum configuration of the compressor guide grid are supplemented by three variants, which were detailed in design in the context of the engine environment and taking into account manufacturing technique points of view (wall thickness). The thermal shock testing of inter-diffuser internal rings was continued. Three out of four diffusers failed, but one survived the shock test. The fracture mechanics examination of one of the damaged diffusers showed that a start of a fracture was on the inside in the area of the edge zone of the diffuser floor where, according to calculations, stresses up to 110 MPa occur. The fracture is not due to faults in the material. The diffuser not damaged by thermal shock was tested further on the test rig described previously, and up to now no damage has occurred. Of the compressor turbine guide grids supplied milled and subsequently hipped, one survived thermal shock for 5 hours without damage. Further testing on the test rig similar to an engine is not possible, as these guide grids are too greatly deformed. (orig./AKF)SIGLEAvailable from TIB Hannover: F94B1273 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Forschung und Technologie (BMFT), Bonn (Germany)DEGerman

    Intelligente Systeme. NEUROS - Neuronale Skills intelligenter Roboter Abschlussbericht des Konsortiums

    No full text
    This project includes the development of technologies of learning control concepts for intelligent robot systems supported by neural net methods. In the frame of the NEUROS project sensorbased robot skills were developed applicable for mobile service robots, mobile production and assembly robots as well as multisensory manipulators. The developed technologies were evaluated on demonstrators in application oriented scenarios. (orig.)Available from TIB Hannover: F00B868+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekSIGLEBundesministerium fuer Bildung und Forschung (BMBF), Bonn (Germany)DEGerman

    Entwicklung elektrochromer Elemente zur Strahlungsregelung von Solarfassaden Abschlussbericht

    No full text
    The development of the solar cladding panel is based upon the well known technology of electrochromic (EC-) glasses. It had to be investigated whether there is sense of proportion to apply EC-elements as solar cladding panels to control the absorption and reflection properties of a facade. A substantial result of the technical investigation was the realisation of an integrated diffuse reflector made of a highly pigmented solid electrolyte. Furthermore, a new sol-gel thin film process has been developed to coat large substrates with homogeneous and high quality optical films. This in combination with a highly transport UV curing polymeric electrolyte results in a economical process which is totally based on chemical treatment with exception of the ITO-electrode. However, the use of the ITO-front electrode limits the modulation depth of the cell to 20%. Simulation calculations show that 20% control level affects the temperature in a building sensitively but nevertheless the relatively low energy savings don't justify the application of these elements. At Dornier an advantageous alternative element was invented with transmissive-reflective switching characteristics which promises an increased efficiency when mounted in front of a facade. (orig.)Die Entwicklung der Solarfassade geht von der bekannten Technik der elektrochromen (EC-)Glaeser aus. Insbesondere sollte untersucht werden, ob sich EC-Elemente als Regelelemente mit Absorption-Reflexions-Schaltverhalten darstellen lassen und ob sich ein technisch und wirtschaftlich sinnvoller Einsatz in Fassaden ableiten laesst. Ein wesentliches Ergebnis der technologischen Arbeiten ist die Darstellung von Zellen mit integriertem Reflektor in Form hochpigmentierter remittierender Festelektrolyten. Sie zeigen geringe optische Verluste und gute elektrochemische Bestaendigkeit. Desweiteren ist es gelungen, zur Herstellung der Funktionsschichten Sol-Gel-Tauchverfahren zu entwickeln, mit denen sich auch grossflaechig sehr homogene und optisch hochwertige Filme abscheiden lassen. Zusammen mit einem hochtransparenten TV-aushaertbaren Polymerelektrolyten ergibt sich damit ein rationelles, mit Ausnahme der ITO-Elektroden, ganz auf chemischen Prozessen beruhendes Fertigungsverahren. Nicht zufriedenstellend geloest ist die Auslegung der transparenten ITO-Frontelektrode, die den energetischen Schalthub der hergestellten Elemente auf Werte von derzeit etwa 20% begrenzt. Simulationsrechnungen zeigen, dass mit einem Hub von 20% durchaus Regelungseffekte am Gebaeude erzielen lassen, jedoch reichen die vorliegenden Ergebnisse nicht aus, um den Einsatz von teuren EC-Absorbern zu rechtfertigen. Attraktiver erscheinen dagegen Elemente mit transmissiv-reflektiver Schaltfunktion, welche vor der Fassade angebracht werden und damit grundsaetzlich hoehere Systemwirkungsgrade vermitteln. (orig.)SIGLEAvailable from TIB Hannover: F96B725+a / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekBundesministerium fuer Bildung, Wissenschaft, Forschung und Technologie, Bonn (Germany)DEGerman

    Perspektivische Informationsdarstellung als zukuenftige Flugfuehrungsanzeige fuer Verkehrflugzeuge

    No full text
    During the past few years, the Technical University of Darmstadt in cooperation with VDO-Luftfahrt and DASA has been developing advanced cockpit information display systems. Presentations for a Primary Flight Display (PFD) and a Navigation Display (ND) have been developed. The PFD is characterized by a perspective artificial inside-out view generated on the basis of digital data bases. In addition, virtual spatial flight guidance aids are displayed. In addition to the navigation symbology, the ND also has a parallel projected terrain presentation and virtual flight guidance aids. On the ground a special symbology is available for taxiing. The displays developed provide the pilot with a comprehensive image of his overall situation within the airspace independent of visibility conditions any time. The described displays have been realized in an experimental system and tested in a flight simulator of the faculty. (orig.)Also published in DGLR yearbook 1994. Pt. 2, p. 687-694SIGLEAvailable from TIB Hannover / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekDEGerman
    corecore