Graphical user interface (GUI) for supervisory control of computer intergtated manufacturing (CIM-70A) using SCADA

Supervisory Control system and the Acquisition Data or SCADA is generalization of effective plant monitoring and conU'ol system in meeting production needs etc. The aim of the study is to prepare a SCADA system for AS/RS, functional Mechatronics Educational Material which simulates to real-life production system. Graphical control buttons to the system will be design to perform single or multiple tasks. The software is form Citect Pty. Limited called Citect SCADA. This project will be discussed as it applied in a CIM-70A at Mechatronic Laboratory of UTHM. Designing a controlling and monitoring system not only for AS/RS but it is also a way providing up-to-date data. It will provide system operators with central or local control using clear, concise, resizable graphics pages (screens). Graphical control buttons to the system will be design to perform single or multiple tasks. In the last chapter, some methodologies for solving the problem as well as to improve the SCADA are proposed

Optimization Parameter Design of SEPIC-Cuk Converter

This paper discusses the optimization parameters design of combined SEPIC-Cuk converter based on SEPIC and Cuk operation for dual output voltage polarities. The SEPIC-Cuk converter is designed to be operated in continuous conduction mode, the selection of passive components, i.e., inductor and capacitor are based on the switching frequency, the duty cycle and inductor current ripple. The range of duty cycle for buck operation is 0<D<0.5, meanwhile for boost operation, the duty cycle range is 0.5<D<1.The simulation and experimental results show a good agreement. Thus, the designed parameters of the converter are confirmed. The finding shows that during buck operation, the output voltages are +3.96 V and -3.96 V with duty cycle of 0.25 when the output voltage is 12 V. Meanwhile, during boost operation, the output voltages are +36 V and -36 V with the duty cycle of 0.75 when the output voltage is 12 V

Design of dual-input two phase dc/dc converter with modified pulse width modulation (mpwm)

Recently, hybrid energy source/renewable energy has attracted interest as the next-generation energy system capable of solving the problems of global warming and energy exhaustion caused by increasing energy consumption. Energy sources such as wind turbines and photovoltaic (PV) systems are intermittent, unpredictable and unregulated. For such systems, the use of multiple-input converter (MIC) has the advantage of regulating and controlling multiple-input sources. With multiple Pulsating Voltage-Source Cells (PVSC) configurations, the proposed converter can deliver power to the load individually and simultaneously. Also, it has the capability of operating either in buck, boost or buck–boost mode of operation. In addition, by proposing the enhanced Modified PWM (MPWM) switching scheme, it is able to solve the issues of the overlapping unregulated input sources. Furthermore, with the proposed multiphase configuration, the input current stresses in the switching devices are reduced and it has the benefit of a reduction in conduction losses. In addition, Zero-Voltage Switching (ZVS) technique is also employed in the proposed converter to reduce the switching loss. The proposed converter circuit is simulated by using MATLAB/Simulink and PSpice software programs. The duty cycle employed to regulate output voltage is reached from Altera DE2-70 board through dSPACE DS1103 board using by Proportional-Integral (PI) controller. The dual-input converter circuit model specification with output power at 200 W, input voltages that range from 10 to 60 V, and operating with dual switching frequencies of 50 kHz and 100 kHz is simulated to validate the designed parameters. Design guidelines, simulation and experimental results are presented. The results show that the proposed two-phase DC/DC converter with ZVS technique achieves 94% efficiency for all ranges of loads compared with the multiphase hard-switching. The total power losses across the power switches are reduced by approximately 37% in the proposed converter. Thus, the proposed converter circuit model offers advantages on input current stress and switching loss reductions. The proposed circuit configuration can be used in a standalone hybrid energy system under unregulated DC input voltages. However the major disadvantages of resonant circuit are increased peak current and voltage stress and not suitable for variable frequency operation

Battery charging and discharging control of a hybrid energy system using microcontroller

This study aims to control charging and discharging the battery for hybrid energy systems. The control system works by selecting the right energy source to supply voltage to the load. And also this control system can regulate charging and discharging the battery automatically. The voltage source consists of two energy, namely from the battery and DC source. The control system that has been designed has the ability to choose the right DC source when the battery capacity is less than 80%. This system also has a good ability to choose a battery source when the battery reaches 100% capacity and the DC source has a voltage drop of more than 20%. This control system is equipped with excessive electric current protection so that the security level is high

Design of FPGA- Based SPWM Single Phase Full-Bridge Inverter

Nowadays power inverters serve as an important emergency power supply system in events of main power supply failure. The AC output voltage of a power electronic inverter is usually non-sinusoidal and hence has a high harmonic content. Sinusoidal Pulse Width Modulation (SPWM) scheme is normally used to convert the DC power supply into AC power supply by comparing the reference voltage waveform with the triangular waveform known as carrier. SPWM provides a way to reduce the total harmonic distortion of load current. The objective of this paper is to demonstrate a SPWM switching scheme by using Altera DE2-70 board. In this SPWM technique, a sinusoidal reference voltage waveform is compared with the triangular carrier voltage to generate the on and off switching states. This switching scheme will trigger the gate of the power switch. In this paper, the SPWM switching strategies implemented using Altera DE2-70 (Cyclone II EP2C35F672C6) with 16 bit serial configuration devices. The switching between reference and carrier waveforms of SPWM is obtained by using Matlab software. Simulation on the design waveform is conducted using Quartus II software tools provided by Altera. The output frequency of SPWM is 50 Hz and the design is limited to two values of modulation indices which are 0.5 and 0.75

Power losses analysis of multiphase DC-DC buck converter using OrCAD PSpice software

DC-DC buck converters have wide applications in portable electronic devices, battery chargers, and telecommunications. However, single-phase DC-DC buck converters have some drawbacks, especially in high current applications, where the increase in the size of the inductor will increase power losses, which significantly affects the overall efficiency of the converter. The multiphase configuration offers several advantages, such as reduction in output voltage ripple, input current ripple, conduction loss, and the physical size of the hardware. This paper presents an analysis of the power losses of the multiphase DC-DC buck converter with output power ranging between 50 watts to 250 watts. To verify the effectiveness of the multiphase converter, performance analysis was done using OrCAD PSpice software, where the number of phases was limited to five phases. This paper focused on power losses in the converter, namely conduction losses in diodes and MOSFETs, switching loss in MOSFETs, as well as losses in the inductor and capacitor. The relationship between the number of phases and factors of switching frequency, output, and the components’ internal resistance was also highlighted and discussed in detail

Modeling of A Single Phase 7-Level Cascaded H-Bridge Multilevel Inverter

Recently, almost all industrial devices are mostly built on electronic devices which are precisely sensitive to harmonic. In order to meet the requirement from the industries demand aimed at a free-harmonics and high power rating source is remarkably increased in past few years. An inverter which a device or electric circuit that convert direct current to alternating current is one of the electronic devices that give concern to researchers for improvement of generating a neat power source. The inverter can be categorized into a single level and multilevel inverter. As compared to single level inverter, multilevel inverter offers minimum harmonic distortion and higher power output. This paper presents a model of multilevel inverter using 7-level Cascaded H-Bridge of multilevel DC-AC inverter to reduce total harmonic distortion with different sinusoidal pulse width modulation such as phase disposition and phase opposition disposition. Simulation output of single phase multilevel inverter cascaded H-bridge are analysed and verified in the Matlab/Simulink software. The result show that the 7-level cascaded H-Bridge multilevel inverter with phase disposition technique generate less total harmonic distortion if it is compared to the phase opposition disposition technique