The visibility study of S-T+_+ Landau-Zener-St\"uckelberg oscillations without applied initialization

Probabilities deduced from quantum information studies are usually based on averaging many identical experiments separated by an initialization step. Such initialization steps become experimentally more challenging to implement as the complexity of quantum circuits increases. To better understand the consequences of imperfect initialization on the deduced probabilities, we study the effect of not initializing the system between measurements. For this we utilize Landau-Zener-St\"uckelberg oscillations in a double quantum dot circuit. Experimental results are successfully compared to theoretical simulations.Comment: 8 pages, 5 figure

Enhanced charge detection of spin qubit readout via an intermediate state

We employ an intermediate excited charge state of a lateral quantum dot device to increase the charge detection contrast during the qubit state readout procedure, allowing us to increase the visibility of coherent qubit oscillations. This approach amplifies the coherent oscillation magnitude but has no effect on the detector noise resulting in an increase in the signal to noise ratio. In this letter we apply this scheme to demonstrate a significant enhancement of the fringe contrast of coherent Landau-Zener-Stuckleberg oscillations between singlet S and triplet T+ two-spin states.Comment: 3 pages, 3 figure

Tuning the exciton g-factor in single InAs/InP quantum dots

Photoluminescence data from single, self-assembled InAs/InP quantum dots in magnetic fields up to 7 T are presented. Exciton g-factors are obtained for dots of varying height, corresponding to ground state emission energies ranging from 780 meV to 1100 meV. A monotonic increase of the g-factor from -2 to +1.2 is observed as the dot height decreases. The trend is well reproduced by sp3 tight binding calculations, which show that the hole g-factor is sensitive to confinement effects through orbital angular momentum mixing between the light-hole and heavy-hole valence bands. We demonstrate tunability of the exciton g-factor by manipulating the quantum dot dimensions using pyramidal InP nanotemplates

Quantum interference between three two-spin states in a double quantum dot

Qubits based on the singlet (S) and the triplet (T0, T+) states in double quantum dots have been demonstrated in separate experiments. It has been recently proposed theoretically that under certain conditions a quantum interference could occur from the interplay between these two qubit species. Here we report experiments and modeling which confirm these theoretical predictions and identify the conditions under which this interference occurs. Density matrix calculations show that the interference pattern manifests primarily via the occupation of the common singlet state. The S/T0 qubit is found to have a much longer coherence time as compared to the S/T+ qubit.Comment: 4 pages including 5 figure

A phonon scattering assisted injection and extraction based terahertz quantum cascade laser

A novel lasing scheme for terahertz quantum cascade lasers, based on consecutive phonon-photon-phonon emissions per module, is proposed and experimentally demonstrated. The charge transport of the proposed structure is modeled using a rate equation formalism. An optimization code based on a genetic algorithm was developed to find a four-well design in the $\mathrm{GaAs/Al_{0.25}Ga_{0.75}As}$ material system that maximizes the product of population inversion and oscillator strength at 150 K. The fabricated devices using Au double-metal waveguides show lasing at 3.2 THz up to 138 K. The electrical characteristics display no sign of differential resistance drop at lasing threshold, which suggests - thanks to the rate equation model - a slow depopulation rate of the lower lasing state, a hypothesis confirmed by non-equilibrium Green's function calculations.Comment: 11 pages, 10 figure

Electron transport in gated InGaAs and InAsP quantum well wires in selectively-grown InP ridge structures

The purpose of this work is to fabricate ribbon-like InGaAs and InAsP wires embedded in InP ridge structures and investigate their transport properties. The InP ridge structures that contain the wires are selectively grown by chemical beam epitaxy (CBE) on pre-patterned InP substrates. To optimize the growth and micro-fabrication processes for electronic transport, we explore the Ohmic contact resistance, the electron density, and the mobility as a function of the wire width using standard transport and Shubnikov-de Haas measurements. At low temperatures the ridge structures reveal reproducible mesoscopic conductance fluctuations. We also fabricate ridge structures with submicron gate electrodes that exhibit non-leaky gating and good pinch-off characteristics acceptable for device operation. Using such wrap gate electrodes, we demonstrate that the wires can be split to form quantum dots evidenced by Coulomb blockade oscillations in transport measurements.Comment: 5 pages, 4 figures, additional references and improved Fig. 4c, MSS-14 conference, submitted to Physica

A phonon scattering assisted injection and extraction based terahertz quantum cascade laser

A novel lasing scheme for terahertz quantum cascade lasers, based on consecutive phonon-photon-phonon emissions per module, is proposed and experimentally demonstrated. The charge transport of the proposed structure is modeled using a rate equation formalism. An optimization code based on a genetic algorithm was developed to find a four-well design in the $\mathrm{GaAs/Al_{0.25}Ga_{0.75}As}$ material system that maximizes the product of population inversion and oscillator strength at 150 K. The fabricated devices using Au double-metal waveguides show lasing at 3.2 THz up to 138 K. The electrical characteristics display no sign of differential resistance drop at lasing threshold, which suggests - thanks to the rate equation model - a slow depopulation rate of the lower lasing state, a hypothesis confirmed by non-equilibrium Green's function calculations.Comment: 11 pages, 10 figure

Surface Screening Charge and Effective Charge

The charge on an atom at a metallic surface in an electric field is defined as the field-derivative of the force on the atom, and this is consistent with definitions of effective charge and screening charge. This charge can be found from the shift in the potential outside the surface when the atoms are moved. This is used to study forces and screening on surface atoms of Ag(001) c$(2\times 2)$ -- Xe as a function of external field. It is found that at low positive (outward) fields, the Xe with a negative effective charge of -0.093 $|{e}|$ is pushed into the surface. At a field of 2.3 V \AA$^{-1}$ the charge changes sign, and for fields greater than 4.1 V \AA$^{-1}$ the Xe experiences an outward force. Field desorption and the Eigler switch are discussed in terms of these results.Comment: 4 pages, 1 figure, RevTex (accepted by PRL

Coherent control of three-spin states in a triple quantum dot

Spin qubits involving individual spins in single quantum dots or coupled spins in double quantum dots have emerged as potential building blocks for quantum information processing applications. It has been suggested that triple quantum dots may provide additional tools and functionalities. These include the encoding of information to either obtain protection from decoherence or to permit all-electrical operation, efficient spin busing across a quantum circuit, and to enable quantum error correction utilizing the three-spin Greenberger-Horn-Zeilinger quantum state. Towards these goals we demonstrate for the first time coherent manipulation between two interacting three-spin states. We employ the Landau-Zener-St\"uckelberg approach for creating and manipulating coherent superpositions of quantum states. We confirm that we are able to maintain coherence when decreasing the exchange coupling of one spin with another while simultaneously increasing its coupling with the third. Such control of pairwise exchange is a requirement of most spin qubit architectures but has not been previously demonstrated.Comment: 12 pages, 13 figures, and 2 table