The Role of Solvent Environment on the Optical Behavior of Chemically Synthesized Silicon Nanoparticles

Silicon nanoparticles (Si-NPs) were prepared by solution-based chemical etching method. Optical characteristics of the as-prepared Si-NPs were investigated in different polar and nonpolar organic solvents. The emission and absorption properties of Si-NPs were tuned by altering the environment (solvents). The variation in absorption coefficient was observed because of the solvent interaction nature of Si-NPs. Si-NPs in polar aprotic and nonpolar solvents manifested good luminescence under UV excitation. PL intensities were observed to be depending on etched cross-section area on wafer surface. The results show a linear dependence of the refractive index (n) on wavelength (λ). The nature of solvents altered the luminescence efficiency of Si-NPs when examining under UV lamp. The emission and absorption properties of Si-NPs were tuned by altering the environment (solvents) through electrostatic interaction of various organic solvents with the Si-NPs. The band shapes of the Si-NPs show remarkable changes in passing from noncoordinating solvent (chloroform) to various coordinating solvents, which was the result of change in the environment around Si-NPs in various solutions

The Role of Solvent Environment on the Optical Behavior of Chemically Synthesized Silicon Nanoparticles

Silicon nanoparticles (Si-NPs) were prepared by solution-based chemical etching method. Optical characteristics of the as-prepared Si-NPs were investigated in different polar and nonpolar organic solvents. The emission and absorption properties of Si-NPs were tuned by altering the environment (solvents). The variation in absorption coefficient was observed because of the solvent interaction nature of Si-NPs. Si-NPs in polar aprotic and nonpolar solvents manifested good luminescence under UV excitation. PL intensities were observed to be depending on etched cross-section area on wafer surface. The results show a linear dependence of the refractive index (n) on wavelength (λ). The nature of solvents altered the luminescence efficiency of Si-NPs when examining under UV lamp. The emission and absorption properties of Si-NPs were tuned by altering the environment (solvents) through electrostatic interaction of various organic solvents with the Si-NPs. The band shapes of the Si-NPs show remarkable changes in passing from noncoordinating solvent (chloroform) to various coordinating solvents, which was the result of change in the environment around Si-NPs in various solutions

Structural, Electronic, and Optical Properties of CsPb(Br1−xClx)3 Perovskite: First-Principles Study with PBE–GGA and mBJ–GGA Methods

The effect of halide composition on the structural, electronic, and optical properties of CsPb(Br1−xClx)3 perovskite was investigated in this study. When the chloride (Cl) content of x was increased, the unit cell volume decreased with a linear function. Theoretical X-ray diffraction analyses showed that the peak (at 2θ = 30.4°) shifts to a larger angle (at 2θ = 31.9°) when the average fraction of the incorporated Cl increased. The energy bandgap (Eg) was observed to increase with the increase in Cl concentration. For x = 0.00, 0.25, 0.33, 0.50, 0.66, 0.75, and 1.00, the Eg values calculated using the Perdew–Burke–Ernzerhof potential were between 1.53 and 1.93 eV, while those calculated using the modified Becke−Johnson generalized gradient approximation (mBJ–GGA) potential were between 2.23 and 2.90 eV. The Eg calculated using the mBJ–GGA method best matched the experimental values reported. The effective masses decreased with a concentration increase of Cl to 0.33 and then increased with a further increase in the concentration of Cl. Calculated photoabsorption coefficients show a blue shift of absorption at higher Cl content. The calculations indicate that CsPb(Br1−xClx)3 perovskite could be used in optical and optoelectronic devices by partly replacing bromide with chloride

Structural, Thermal, and Electrical Properties of Poly(Ethylene Oxide)—Tetramethyl Succinonitrile Blend for Redox Mediators

An all-solid–state dye-sensitized solar cell is one of the non-fossil fuel-based electrochemical devices for electricity generation in a high-temperature region. This device utilizes a redox mediator, which is a fast ion-conducting solid polymer electrolyte (SPE). The SPE makes the device economical, thinner, and safer in high-temperature regions. The SPE generally has a form of matrix−plasticizer−redox salts. Succinonitrile (SN) is generally employed as a plasticizer for reducing the crystallinity of poly(ethylene oxide), abbreviated as PEO, a common polymeric matrix. In the present paper, the structural and thermal properties of tetramethyl succinonitrile (TMSN) were compared with SN for its application as a solid plasticizer. TMSN and SN both are plastic crystals. TMSN has four methyl groups by replacing the hydrogen of the SN, resulting in higher molecular weight, solid–solid phase transition temperature, and melting temperature. We thoroughly studied the structural, thermal, and electrical properties of the [(1−x)PEO: xTMSN] blend for utilizing it as a matrix, where x = 0–0.25 in mole fraction. The FT-IR spectra and XRD patterns of the blends exhibited PEO-alike up to x = 0.15 mole and TMSN-alike for x > 0.15 mole. Differential scanning calorimetry revealed formation of a eutectic phase from x = 0.1 mole and phase separation from x = 0.15 mole. The blends with x = 0.1–0.15 mole had a low value of PEO crystallinity. Thermogravimetric analysis showed thermal stability of the blends up to 75 °C. The blends exhibited electrical conductivity, σ25°C more than 10−9 S cm−1, and Arrhenius behavior (activation energy, ~0.8 eV) in a temperature region, 25–50 °C

Ultra-Stable Polycrystalline CsPbBr3 Perovskite–Polymer Composite Thin Disk for Light-Emitting Applications

Organic–inorganic halide organometal perovskites have demonstrated very promising performance in optoelectronic applications, but their relatively poor chemical and colloidal stability hampers the further improvement of devices based on these materials. Perovskite material engineering is crucial for achieving high photoluminescence quantum yields (PLQYs) and long stability. Herein, these goals are attained by incorporating bulk-structure CsPbBr3, which prevents colloidal degradation, into polymethyl methacrylate (PMMA) polymer in thin-disk form. This technology can potentially realize future disk lasers with no optical and structural contributions from the polymer. The polycrystalline CsPbBr3 perovskite particles were simply obtained by using a mechanical processing technique. The CsPbBr3 was then incorporated into the PMMA polymer using a solution blending method. The polymer enhanced the PLQYs by removing the surface trap states and increasing the water resistance and stability under ambient conditions. In our experimental investigation, the CsPbBr3/PMMA composites were extraordinarily stable and remained strongly luminescent after water immersion for three months and air exposure for over one year, maintaining 80% of their initial photoluminescence intensity. The CsPbBr3/PMMA thin disk produced amplified spontaneous emission for a long time in air and for more than two weeks in water

Single-Source Thermal Evaporation Growth and the Tuning Surface Passivation Layer Thickness Effect in Enhanced Amplified Spontaneous Emission Properties of CsPb(Br0.5Cl0.5)3 Perovskite Films

High-quality inorganic cesium lead halide perovskite CsPb(Br0.5Cl0.5)3 thin films were successfully achieved through evaporation of the precursors and deposition sequentially by a single-source thermal evaporation system. The different melting points of the precursors were enabled us to evaporate precursors one by one in one trip. The resulting films through its fabrication were smooth and pinhole-free. Furthermore, this technique enabled complete surface coverage by high-quality perovskite crystallization and more moisture stability oppositely of that produce by solution-processed. Then the perovskite films were encapsulated by evaporated a polymethyl methacrylate (PMMA) polymer as a specialized surface passivation approach with various thicknesses. The blue emission, high photoluminescence quantum yield (PLQY), stable, and low threshold of amplified spontaneous emission (ASE) properties of CsPb(Br0.5Cl0.5)3 films in the bulk structure at room temperature were achieved. The effects of the surface-passivation layer and its thickness on the optical response were examined. Detailed analysis of the dependence of ASE properties on the surface passivation layer thickness was performed, and it was determined this achieves performance optimization. The ASE characteristics of bare perovskite thin film were influenced by the incorporation of the PMMA with various thicknesses. The improvement to the surface layer of perovskite thin films compared to that of the bare perovskite thin film was attributed to the combination of thermal evaporation deposition and surface encapsulation. The best results were achieved when using a low PMMA thickness up to 100 nm and reducing the ASE threshold by ~11 μJ/cm2 when compared with free-encapsulation and by ~13 μJ/cm2 when encapsulation occurs at 200 nm or thicker. Compared to the bare CsPb(Br0.5Cl0.5)3, ASE reduced 1.1 times when the PMMA thickness was 100 nm

Surface Passivation for Promotes Bi-Excitonic Amplified Spontaneous Emission in CsPb(Br/Cl)₃ Perovskite at Room Temperature

Perovskite-type lead halides exhibit promising performances in optoelectronic applications, for which lasers are one of the most promising applications. Although the bulk structure has some advantages, perovskite has additional advantages at the nanoscale owing to its high crystallinity given by a lower trap density. Although the nanoscale can produce efficient light emission, its comparatively poor chemical and colloidal stability limits further development of devices based on this material. Nevertheless, bulk perovskites are promising as optical amplifiers. There has been some developmental progress in the study of optical response and amplified spontaneous emission (ASE) as a benchmark for perovskite bulk phase laser applications. Therefore, to achieve high photoluminescence quantum yields (PLQYs) and large optical gains, material development is essential. One of the aspects in which these goals can be achieved is the incorporation of a bulk structure of high-quality crystallization films based on inorganic perovskite, such as cesium lead halide (CsPb(Br/Cl)3), in polymethyl methacrylate (PMMA) polymer and encapsulation with the optimal thickness of the polymer to achieve complete surface coverage, prevent degradation, surface states, and surface defects, and suppress emission at depth. Sequential evaporation of the perovskite precursors using a single-source thermal evaporation technique (TET) effectively deposited two layers. The PL and ASEs of the bare and modified films with a thickness of 400 nm PMMA were demonstrated. The encapsulation layer maintained the quantum yield of the perovskite layer in the air for more than two years while providing added optical gain compared to the bare film. Under a picosecond pulse laser, the PL wavelength of single excitons and ASE wavelength associated with the stimulated decay of bi-excitons were achieved. The two ASE bands were highly correlated and competed with each other; they were classified as exciton and bi-exciton recombination, respectively. According to the ASE results, bi-exciton emission could be observed in an ultrastable CsPb(Br/Cl)3 film modified by PMMA with a very low excitation energy density of 110 µJ/cm2. Compared with the bare film, the ASE threshold was lowered by approximately 5%. A bi-exciton has a binding energy (26.78 meV) smaller than the binding energy of the exciton (70.20 meV)

[1,2-Bis(diphenylphosphanyl)ethane-κ2P,P′]dichloridopalladium(II) dimethyl sulfoxide monosolvate

In the title compound, [PdCl2(C26H24P2)]·C2H6OS, the PdII atom adopts a distorted cis-PdCl2P2 square-planar coordination geometry. The five-membered chelate ring adopts an envelope conformation with a methylene C atom in the flap position. The S and C atoms of the dimethyl sulfoxide (DMSO) solvent molecule are disordered over two sets of sites in a 0.8976 (18):0.1024 (18) ratio. The DMSO O atom accepts three C—H...O hydrogen bonds from an adjacent complex molecule

Solvent Effects on the Structural and Optical Properties of MAPbI3 Perovskite Thin Film for Photovoltaic Active Layer

Controlling the crystallinity, homogeneity, and surface morphology is an efficient method of enhancing the perovskite layer. These improvements contribute toward the optimization of perovskite film morphology for its use in high-performance photovoltaic applications. Here, different solvents will be used in order to process the perovskite precursor, to improve the interfacial contacts through generating a smooth film and uniform crystal domains with large grains. The effect that the solvent has on the optical and structural properties of spin-coated methyl ammonium lead iodide (MAPbI3) perovskite thin films prepared using a single-step method was systematically investigated. The spin-coating parameters and precursor concentrations of MAI and PbI2 were optimized to produce uniform thin films using the different solvents N, N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and γ-butyrolactone (GBL). The effect that the solvent has on the morphology of the MAPbI3 films was examined to determine how the materials can be structurally altered to make them highly efficient for use in perovskite hybrid photovoltaic applications. Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) results show that the synthesized MAPbI3 films prepared using DMSO, DMF, and GBL exhibit the best crystallinity and optical characteristics (photoluminescence (PL)), respectively, of the prepared films. The optical properties resulting from the noticeable improvement PL of the films can be clearly correlated with their crystallinity, depending on the solvents used in their preparation. The film prepared in DMSO shows the highest transmittance and the highest bandgap energy of the prepared films

Electrical Transport, Structural, Optical and Thermal Properties of [(1−x)Succinonitrile: xPEO]-LiTFSI-Co(bpy)3(TFSI)2-Co(bpy)3(TFSI)3 Solid Redox Mediators

The solar cell has been considered one of the safest modes for electricity generation. In a dye-sensitized solar cell, a commonly used iodide/triiodide redox mediator inhibits back-electron transfer reactions, regenerates dyes, and reduces triiodide into iodide. The use of iodide/triiodide redox, however, imposes several problems and hence needs to be replaced by alternative redox. This paper reports the first Co2+/Co3+ solid redox mediators, prepared using [(1−x)succinonitrile: xPEO] as a matrix and LiTFSI, Co(bpy)3(TFSI)2, and Co(bpy)3(TFSI)3 as sources of ions. The electrolytes are referred to as SN_E (x = 0), Blend 1_E (x = 0.5 with the ethereal oxygen of the PEO-to-lithium ion molar ratio (EO/Li+) of 113), Blend 2_E (x = 0.5; EO/Li+ = 226), and PEO_E (x = 1; EO/Li+ = 226), which achieved electrical conductivity of 2.1 × 10−3, 4.3 × 10−4, 7.2 × 10−4, and 9.7 × 10−7 S cm−1, respectively at 25 °C. Only the blend-based polymer electrolytes exhibited the Vogel-Tamman-Fulcher-type behavior (vitreous nature) with a required low pseudo-activation energy (0.05 eV), thermal stability up to 125 °C, and transparency in UV-A, visible, and near-infrared regions. FT-IR spectroscopy demonstrated the interaction between salt and matrix in the following order: SN_E < Blend 2_E < Blend 1_E << PEO_E. The results were compared with those of acetonitrile-based liquid electrolyte, ACN_E