Role of underappreciated vectors in malaria transmission in an endemic region of Bangladesh-India border

Background Despite the efforts of the National Malaria Control Programme, malaria remains as an important public health problem in Bangladesh, particularly in the south-eastern region bordering India. Successful malaria control strategies rely on a detailed understanding of the underlying causes of malaria transmission. Here, an entomological survey was conducted in a malaria endemic area of Bangladesh bordering India to investigate the Anopheles mosquito community and assess their Plasmodium infection status. Methods Monthly entomological collections were undertaken from October 2010 to September 2011 in five villages in the Matiranga sub-district, Khagrachari district in Bangladesh, bordering the Indian State of Tripura. CDC miniature light traps were placed inside houses to collect adult Anopheles mosquitoes. Following morphological and molecular identification of the female Anopheles mosquitoes collected, they were screened for circumsporozoite proteins (CSP) of Plasmodium falciparum (Pf), Plasmodium vivax-210 (Pv-210) and Plasmodium vivax-247 (Pv-247), by ELISA to determine natural infection rates. Variation in Anopheles species composition, relative abundance and Plasmodium infection rates were analysed between sampled villages. Results A total of 2,027 female Anopheles were collected, belonging to 20 species. Anopheles nivipes was the most abundant species in our test villages during the peak malaria transmission season, and was observed sympatrically with An. philippinensis in the studied area. However, in the dry off-peak season, An. jeyporiensis was the most abundant species. Shannon’s diversity index was highest in October (2.12) and evenness was highest in May (0.91). The CSP ELISA positive rate overall was 0.44%. Anopheles karwari (n = 2), An. barbirostris s.l. (n = 1) and An. vagus (n = 1) were recorded positive for Pf. Anopheles kochi (n = 1) was positive for Pv-210 while An. umbrosus (n = 1), An. nivipes (n = 1) and An. kochi (n = 1) were positive for Pv-247. A mixed infection of Pf and Pv-247 was detected in An. barbirostris s.l.. Conclusion High diversity of Anopheles species was observed in areas close to the international border where species that were underestimated for malaria transmission significantly outnumbered principal vector species and these may play a significantly heightened role in malaria transmission

Global, regional, and national burden of disorders affecting the nervous system, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

BackgroundDisorders affecting the nervous system are diverse and include neurodevelopmental disorders, late-life neurodegeneration, and newly emergent conditions, such as cognitive impairment following COVID-19. Previous publications from the Global Burden of Disease, Injuries, and Risk Factor Study estimated the burden of 15 neurological conditions in 2015 and 2016, but these analyses did not include neurodevelopmental disorders, as defined by the International Classification of Diseases (ICD)-11, or a subset of cases of congenital, neonatal, and infectious conditions that cause neurological damage. Here, we estimate nervous system health loss caused by 37 unique conditions and their associated risk factors globally, regionally, and nationally from 1990 to 2021.MethodsWe estimated mortality, prevalence, years lived with disability (YLDs), years of life lost (YLLs), and disability-adjusted life-years (DALYs), with corresponding 95% uncertainty intervals (UIs), by age and sex in 204 countries and territories, from 1990 to 2021. We included morbidity and deaths due to neurological conditions, for which health loss is directly due to damage to the CNS or peripheral nervous system. We also isolated neurological health loss from conditions for which nervous system morbidity is a consequence, but not the primary feature, including a subset of congenital conditions (ie, chromosomal anomalies and congenital birth defects), neonatal conditions (ie, jaundice, preterm birth, and sepsis), infectious diseases (ie, COVID-19, cystic echinococcosis, malaria, syphilis, and Zika virus disease), and diabetic neuropathy. By conducting a sequela-level analysis of the health outcomes for these conditions, only cases where nervous system damage occurred were included, and YLDs were recalculated to isolate the non-fatal burden directly attributable to nervous system health loss. A comorbidity correction was used to calculate total prevalence of all conditions that affect the nervous system combined.FindingsGlobally, the 37 conditions affecting the nervous system were collectively ranked as the leading group cause of DALYs in 2021 (443 million, 95% UI 378–521), affecting 3·40 billion (3·20–3·62) individuals (43·1%, 40·5–45·9 of the global population); global DALY counts attributed to these conditions increased by 18·2% (8·7–26·7) between 1990 and 2021. Age-standardised rates of deaths per 100 000 people attributed to these conditions decreased from 1990 to 2021 by 33·6% (27·6–38·8), and age-standardised rates of DALYs attributed to these conditions decreased by 27·0% (21·5–32·4). Age-standardised prevalence was almost stable, with a change of 1·5% (0·7–2·4). The ten conditions with the highest age-standardised DALYs in 2021 were stroke, neonatal encephalopathy, migraine, Alzheimer's disease and other dementias, diabetic neuropathy, meningitis, epilepsy, neurological complications due to preterm birth, autism spectrum disorder, and nervous system cancer.InterpretationAs the leading cause of overall disease burden in the world, with increasing global DALY counts, effective prevention, treatment, and rehabilitation strategies for disorders affecting the nervous system are needed

Enhancing the interfacial properties of Quickstep{u2122} cured biocomposites

This research has enhanced the performance of natural fibre composites by optimisation of the cure cycle under Quickstep{u2122} process and treatment time under atmospheric pressure glow discharge plasma. The study has also utilised many characterization methods, theoretical models, and established surface-property relationship to manufacture composites with optimum strength and toughness

Enhancing the fiber–matrix adhesion in woven jute fabric reinforced polyester resin-based composites

This study focused an current drawbacks associated with wet lay-up processes. polyester resin and jute fabrics for jute/polyester based composite applications. Three different processes were studied to address manufacturing drawbacks. The composites are based on a wet lay-up and Quickstep"' (QS) process: can-bined atmospheric helium plasma. wet lay-up and Quickstepm (PQS) process: and finally vacuum assisted resin infusion (VARI) process. A systematic comparison with composites made by wet lay-up was carried out. The optimal QS process cure cycle of 30 min curing time at 95°C was selected based on flexural and mode-I fracture toughness properties. It was observed that the values of both fracture toughness and flexural strength/modulus factors increased up to a 30 min cure cycle and decreased afterwards. After optimisation. QS was proven to have a positive influence on fracture toughness without sacrificing flexural properties. saving curing time by 50% when compared to wet lay-up. Composites made by vacuum assisted resin infu-sion (VARI) provided the best flexural strength and modulus values which was due to highest fiber volume fraction and lowest flexural deflection at break. It also showed a decrease in fracture toughness proper-ties in comparison to wet by-up and the QS composites. All of these phenomena were due to change in fiber-matrix adhesion after various processing conditions

A surface-property relationship of atmospheric plasma treated jute composites

Jute fabric was treated for various periods of time under atmospheric plasma glow discharge (APGD) using helium (He), helium/nitrogen (He/N), and helium/acetylene (He/Ac) gases. It was found that, for all gases studied, 10 s of treatment was enough to significantly improve the wetting behaviour of the fabric. Different levels of improvement of up to 55%, 62%, and 40% in flexural strength, flexural modulus, and interlaminar shear stress respectively were observed in composites produced from plasma treated fabrics. The storage modulus and glass transition temperature were also improved by up to 200% and 16 °C, respectively. Efforts were made in order to correlate the changes in surface roughness, tip-surface adhesion, and surface chemistry of the fibres (measured by XPS and FTIR) with the performance of the composites. In light of some of the trends, it has been postulated that low-molecular weight oxidised species have formed on the fibre surface during plasma and that the chemical nature of these species must have changed considerably depending on the type of gas mixture used, inducing various synergistic or antagonistic effects

Effect of manufacturing process on the flexural, fracture toughness, and thermo-mechanical properties of bio-composites

This study evaluated the performance of jute reinforced polyester bio-composites cured with an out-of-autoclave curing process, Quickstep™. The mode I fracture toughness (GIc), flexural, and thermo-mechanical properties of the composites were measured for cure cycle times of 5, 30, 60 and 90 min at an optimum cure temperature of 95 °C, and were compared to a reference composite laminate cured at room temperature. Generally, the Quickstep process was found to improve the degree of cure by up to 55% and the resistance to crack propagation of the resulting composites was found to be more stable. A balance in properties was obtained after 30 min of cure where an improvement in thermo-mechanical and fracture properties was observed, but on the other hand, was accompanied by a decrease in flexural strength and modulus compared to the reference sample. Shorter (i.e. 5 min) and longer cure cycle times (above 30 min) used by the Quickstep were found to be detrimental to the properties of the resulting composites

Measuring the adhesion force on natural fibre surface using scanning probe microscopy

This work has focused on measuring the adhesion forces on both untreated and atmospheric helium plasma treated single jute fibre surfaces using scanning probe microscopy (SPM). The measurements were conducted on three differently aged surfaces for one week, three weeks and six weeks using a standard silicon nitride tip in force-volume (f-v) mode. Up to 256 adhesion data points were collected from various locations on the surface of the studied fibres using in-house developed software and the resulting data were statistically analysed by the histogram method. Results obtained from this analysis method were found to be very consistent with a small statistical variation. The work of adhesion, Wa, was calculated from measured adhesion force using the Johnson–Kendall–Roberts (JKR) and Derjaguin–Muller–Toporov (DMT) models. Increases in both adhesion force and work of adhesion were observed on jute fibre with certain levels of atmospheric plasma treatment and ageing time

Influence of atmospheric helium plasma on the surface energy of jute fibres and the performance of resulting composites

In this work, an atmospheric pressure glow discharge helium plasma treatment was employed to modify the surface properties of jute fibres. The resulting bio-composites showed an increase in flexural properties and interlaminar shear strength (ILSS) compared to composites produced using untreated jute fibres. To understand the reason behind the ILSS improvement, the acid–base properties of jute fibres were determined by contact angle analysis using the capillary rise method. The results were fitted further to van Oss–Chaudhury–Good (vOCG) and Chang–Qin–Chen (CQC) models to determine the Lifshitz–van der Waals (LW) and acid–base components of surface energy. Surface energy determined by the vOCG model revealed that plasma treatment of jute fibre resulted in a 22% increase in total surface energy, a 19% increase in the LW component and a 24% increase in the acid–base component of surface energy. The increase in the acid–base component is due to the significant increase (69%) in the electron-accepting (γ+S) parameter. On the other hand, the CQC model clearly indicates an amphoteric nature of the fibre surface based on opposite signs of the acid and base principal values (PSa and PSb). Overall, the results indicated that increases in both LW and acid–base components were responsible for improvement in the properties of the composites

Overcoming interfacial affinity issues in natural fiber reinforced polylactide biocomposites by surface adsorption of amphiphilic block copolymers

This work demonstrates that the interfacial properties in a natural fiber reinforced polylactide biocomposite can be tailored through surface adsorption of amphiphilic and biodegradable poly (ethylene glycol)-b-poly-(L-lactide) (PEG-PLLA) block copolymers. The deposition from solvent solution of PEG-PLLA copolymers onto the fibrous substrate induced distinct mechanisms of molecular organization at the cellulosic interface, which are correlated to the hydrophobic/hydrophilic ratios and the type of solvent used. The findings of the study evidenced that the performance of the corresponding biocomposites with polylactide were effectively enhanced by using these copolymers as interfacial coupling agents. During the fabrication stage, diffusion of the polylactide in the melt induced a change in the environment surrounding block copolymers which became hydrophobic. It is proposed that molecular reorganization of the block copolymers at the interface occurred, which favored the interactions with both the hydrophilic fibers and hydrophobic polylactide matrix. The strong interactions such as intra- and intermolecular hydrogen bonds formed across the fiber−matrix interface can be accounted for the enhancement in properties displayed by the biocomposites. Although the results reported here are confined, this concept is unique as it shows that by tuning the amphiphilicity and the type of building blocks, it is possible to control the surface properties of the substrate by self-assembly and disassembly of the amphiphiles for functional materials