Effects of slag content on the residual mechanical properties of ambient air-cured geopolymers exposed to elevated temperatures

This paper presents the effects of various slag contents on the residual compressive strength and physical properties of ambient air-cured fly ash-slag blended geopolymers after exposure to various elevated temperatures up to 800°C. The results showed an increasing trend in the compressive strength of ambient air-cured geopolymers with increase in the slag contents after exposure to 400 and 600°C temperatures. This trend deviated, however, at 800°C. Nevertheless, all the geopolymers showed reductions in control compressive strength at ambient temperature after exposure to elevated temperatures. The reductions were much higher at 600 and 800°C compared to 400°C. All the geopolymers exhibited significant damage in terms of cracking after exposure to a temperature of 800°C compared to 400 and 600°C and significant damage occurred at slag contents of 15–30%. Scanning electron microscopic (SEM) images of the above geopolymers also showed higher porosity at 800°C compared to 400 and 600°C. Traces of calcite/calcium silicate hydrate (CSH) peaks are observed in the X-ray diffraction (XRD) analysis of fly ash-slag geopolymers, and the intensity of those peaks increased with increases in slag contents. After exposure to elevated temperatures, the calcite/CSH peaks disappeared and new phases of nepheline and gehlenite were formed at 800°C in all the fly ash-slag geopolymers

Fibula head tumours

No Abstract.Nigerian Journal of Surgical Sciences Vol. 18 (1) 2008: pp. 54-5

Evaluation of cytogenotoxic potential of Morinda lucida leaf extract on Swiss albino male mice using two bioassays

Background: Utilization of Morinda lucida for the treatment of ailments such as malaria, diarrhea, infertility in women, and dysentery in many countries including Nigeria is on increase due to its efficiency, availability, and affordability. However, its cytogenotoxicity has not been elucidated. This study investigated the phytochemical constituents and possible genotoxic and cytotoxic effects of M. lucida leaf extract in Swiss albino male mice using bone marrow micronucleus and sperm morphology assays. Methods: Plant materials was collected, thoroughly washed, and air-dried at room temperature prior to maceration. The extract was assessed for the presence of the phytochemical compounds. Swiss albino male mice (Mus musculus) (n=4) were treated with different concentrations of this extract (400 mg/kg, 800 mg/kg, and 1200 mg/kg) while distilled water was used as negative control. Results: Phytochemical analysis revealed that the extract contains saponins, terpenoids, flavonoids, glycosides, and tannins. We observed micronucleated polychromatic erythrocytes (PCE) and normochromatic erythrocytes (NCE) of 3.20, 1.10, and 1.95 at different concentrations of 400 mg/kg, 800 mg/kg, and 1200 mg/kg respectively in the treated animals. The result showed no significant increase in the frequency of abnormalities (p < 0.05) when compared to the negative control; however, in separate analysis of mono-micronucleated PCE and mono-micronucleated NCE per group, a significant increase at 400 mg/kg and 1200 mg/kg concentrations was observed. The sperm anomalies decreased with increase in concentration. Conclusions: This study recommends 800 mg/kg concentration of the plant extract; however, it should be further and properly investigated as it contains some pharmaceutical components that can be used for pharmacological purposes

Behaviour of Carbon and Basalt Fibres Reinforced Fly Ash Geopolymer at Elevated Temperatures

© 2018, The Author(s). This paper presents the behaviour of potassium activators synthesized fly ash geopolymer containing carbon and basalt fibre at ambient and elevated temperature. Six series of fly ash based geopolymer were cast where carbon and basalt fibre were added as 0.5, 1 and 1.5% by weight of fly ash. One extra control series without any fibre was also cast. Each series of samples were tested at ambient temperature and also heated at 200, 400, 600 and 800 °C and thus a total of 35 series of samples were tested in this study. The result shows that the geopolymer containing 1 wt% basalt and 1 wt% carbon fibre exhibited better compressive strength, lower volumetric shrinkage and mass loss than other fibre contents. Among two fibres composites, the carbon fibre geopolymer exhibited better performance than its basalt fibre counterpart regardless of temperature. The microstructure of carbon fibre reinforced geopolymer composite is more compact containing fewer pores/voids than its basalt based counterpart at elevated temperatures. The results also support the fact that carbon fibre is better than basalt fibre at elevated temperature and showed better bonding with geopolymer at elevated temperature