Combining experimental and theoretical insights for reduction of CO2 to multi-carbon compounds

The electrochemical reduction of carbon dioxide is a promising method for both recycling of atmospheric CO2 and storing renewably produced electrical energy in stable chemical bonds. In this paper, we review the current challenges within this promising area of research. Here we provide an overview of key findings from the perspective of improving the selectivity of reduction products, to serve as a contextual foundation from which a firmer understanding of the field can be built. Additionally, we discuss recent innovations in the development of catalytic materials selective toward C3 and liquid products. Through this, we form a basis from which key mechanisms into C3 products may be further examined. Carbon–carbon (C–C) bond formation provides a key step in the reduction of CO2 to energy dense and high value fuels. Here we demonstrate how variations in catalytic surface morphology and reaction kinetics influence the formation of multi-carbon products through their impact on the formation of C–C bonds. Finally, we discuss recent developments in the techniques used to characterise and model novel electrocatalysts. Through these insights, we hope to provide the reader with a perspective of both the rapid progress of the field of electrocatalysis, as well as offering a concise overview of the challenges faced by researchers within this rapidly developing field of research

DNA-Binding Capabilities and Anticancer Activities of Ruthenium(II) Cymene Complexes with (Poly)cyclic Aromatic Diamine Ligands

Ruthenium(II) arene complexes of the general formula [RuCl(η6-p-cymene)(diamine)]PF6 (diamine = 1,2-diaminobenzene (1), 2,3-diaminonaphthalene (2), 9,10-diaminophenanthrene (3), 2,3-diaminophenazine (4), and 1,2-diaminoanthraquinone (5) were synthesized. Chloro/aqua exchange was evaluated experimentally for complexes 1 and 2. The exchange process was investigated theoretically for all complexes, revealing relatively fast exchange with no significant influence from the polycyclic aromatic diamines. The calf thymus DNA (CT-DNA) binding of the complexes increased dramatically upon extending the aromatic component of the diamines, as evaluated by changes in absorption spectra upon titration with different concentrations of CT-DNA. An intercalation binding mode was established for the complexes using the increase in the relative viscosity of the CT-DNA following addition of complexes 1 and 2. Theoretical studies showed strong preference for replacement of water by guanine for all the complexes, and relatively strong Ru-Nguanine bonds. The plane of the aromatic systems can assume angles that support non-classical interactions with the DNA and covalent binding, leading to higher binding affinities. The ruthenium arenes illustrated in this study have promising anticancer activities, with the half maximal inhibitory concentration (IC50) values comparable to or better than cisplatin against three cell lines.This project was funded by the Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah, Saudi Arabia under grant no. (KEP-60-130-38)

Mechanistic insights into the reductive dehydroxylation pathway for the biosynthesis of isoprenoids promoted by the IspH enzyme

Here, we report an integrated quantum mechanics/molecular mechanics (QM/MM) study of the bio-organometallic reaction pathway of the 2H+/2e- reduction of (E)-4-hydroxy-3-methylbut-2-enyl pyrophosphate (HMBPP) into the so called universal terpenoid precursors isopentenyl pyrophosphate (IPP) and dimethylallyl pyrophosphate (DMAPP), promoted by the IspH enzyme. Our results support the viability of the bio-organometallic pathway through rotation of the OH group of HMBPP away from the [Fe4S4] cluster at the core of the catalytic site, to become engaged in a H-bond with Glu126. This rotation is synchronous with Ï\u80-coordination of the C2C3 double bond of HMBPP to the apical Fe atom of the [Fe4S4] cluster. Dehydroxylation of HMBPP is triggered by a proton transfer from Glu126 to the OH group of HMBPP. The reaction pathway is completed by competitive proton transfer from the terminal phosphate group to the C2 or C4 atom of HMBPP

Toward better understanding of the support effect: Test cases for CO dissociation on Fen/TiO2(110), n=4, 5

The Fischer-Tropsch reaction is initiated by direct CO dissociation for Iron catalyst even though a H-assisted mechanism may be easier on other metals. In the gas phase, the CO dissociation is only favorable for Fe-clusters composed by more than 11 atoms. We show here the remarkable effect of the support TiO2(1 1 0), making this dissociation exothermic for Fe-4 and Fe-5 clusters. The main factor for the CO activation is the electron transfer to the reducible support. The role of the TiO2(1 1 0) support is to transform the neutral cluster into a positively charged one for which CO dissociation is easier. (C) 2017 Elsevier B.V. All rights reserved

Generation of Cu-In alloy surfaces from CuInO2 as selective catalytic sites for CO2 electroreduction

The lack of availability of efficient, selective and stable electrocatalysts is a major hindrance for scalable CO2 reduction processes. Herein, we report the generation of Cu-In alloy surfaces for electrochemical reduction of CO2 from mixed metal oxides of CuInO2 as the starting material. The material successfully generates selective active sites to form CO from CO2 electroreduction at mild overpotentials. Density functional theory (DFT) indicates that the site occupation of the inert In occurs more on the specific sites of Cu. In addition, while In atoms do not preferentially adsorb H or CO, Cu atoms, which neighbor the In atoms, alters the preference of their adsorption. This preference for site occupation and altered adsorption may account for the improved selectivity over that observed for Cu metal. This study demonstrates an example of a scalable synthesis method of bimetallic surfaces utilized with the mixed oxide precursor having the diversity of metal choice, which may drastically alter the electrocatalytic performance, as presented herein

Non-precious bimetallic catalysts for selective dehydrogenation of an organic chemical hydride system

Methylcyclohexane (MCH)-toluene (TOL) chemical hydride cycles as hydrogen carrier systems are successful with the selective dehydrogenation of MCH to TOL, which has been achieved only using precious Pt-based catalysts. Herein, we report improved selectivity using non-precious metal nickel-based bimetallic catalysts, where the second metal occupies the unselective step sites

Kinetics on NiZn Bimetallic Catalysts for Hydrogen Evolution via Selective Dehydrogenation of Methylcyclohexane to Toluene

Liquid organic chemical hydrides are effective hydrogen storage media for easy and safe transport. The chemical couple of methylcyclohexane (MCH) and toluene (TOL) has been considered one of the feasible cycles for a hydrogen carrier, but the selective dehydrogenation of MCH to TOL has been reported using only Pt-based noble metal catalysts. This study reports MCH dehydrogenation to TOL using supported NiZn as a selective, non-noble-metal catalyst. A combined experimental and computational study was conducted to provide insight into the site requirements and reaction mechanism for MCH dehydrogenation to TOL, which were compared with those for cyclohexane (CH) dehydrogenation to benzene (BZ). The kinetic measurements carried out at 300-360°C showed an almost zero order with respect to MCH pressure in the high-pressure region (â\u89¥10 kPa) and nearly a positive half order with respective to H2pressure (â\u89¤40 kPa). These kinetic data for the dehydrogenation reaction paradoxically indicate that hydrogenation of a strongly chemisorbed intermediate originating from TOL is the rate-determining step. Density functional theory (DFT) calculation confirms that the dehydrogenated TOL species at the aliphatic (methyl) position group (C6H5CH2) were strongly adsorbed on the surface, which must be hydrogenated to desorb as TOL. This hydrogen-assisted desorption mechanism explains the essential role of excess H2present in the feed in maintaining the activity of the metallic surface for hydrogenation. The rate of the CH to BZ reaction was less sensitive to H2pressure than that of MCH to TOL, which can be explained by the absence of a methyl group in the structure, which in turn reduces the binding energy of the adsorbed species. DFT suggests that the improved TOL selectivity by adding Zn to Ni was due to Zn atoms preferentially occupying low-coordination sites on the surface (the corner and edge sites), which are likely the unselective sites responsible for the C-C dissociation of the methyl group of TOL. (Chemical Equation Presented)

Cu-Sn Bimetallic Catalyst for Selective Aqueous Electroreduction of CO2 to CO

We report a selective and stable electrocatalyst utilizing non-noble metals consisting of Cu and Sn for the efficient and selective reduction of CO2 to CO over a wide potential range. The bimetallic electrode was prepared through the electrodeposition of Sn species on the surface of oxide-derived copper (OD-Cu). The Cu surface, when decorated with an optimal amount of Sn, resulted in a Faradaic efficiency (FE) for CO greater than 90% and a current density of -1.0 mA cm(-2) at -0.6 V vs RHE, compared to the CO FE of 63% and -2.1 mA cm(-2) for OD-Cu. Excess Sn on the surface caused H-2 evolution with a decreased current density. X-ray diffraction (XRD) suggests the formation of Cu Sn alloy. Auger electron spectroscopy of the sample surface exhibits zerovalent Cu and Sn after the electrodeposition step. Density functional theory (DFT) calculations show that replacing a single Cu atom with a Sn atom leaves the d-band orbitals mostly unperturbed, signifying no dramatic shifts in the bulk electronic structure. However, the Sn atom discomposes the multifold sites on pure Cu, disfavoring the adsorption of H and leaving the adsorption of CO relatively unperturbed. Our catalytic results along with DFT calculations indicate that the presence of Sn on reduced OD-Cu diminishes the hydrogenation capability-i.e., the selectivity toward H-2 and HCOOH-while hardly affects the CO productivity. While the pristine monometallic surfaces (both Cu and Sn) fail to selectively reduce CO2, the Cu Sn bimetallic electrocatalyst generates a surface that inhibits adsorbed H*, resulting in improved CO FE. This study presents a strategy to provide low-cost non-noble metals that can be utilized as a highly selective electrocatalyst for the efficient aqueous reduction of CO2

Single-Site Tetracoordinated Aluminum Hydride Supported on Mesoporous Silica. From Dream to Reality!

The reaction of mesoporous silica (SBA15) dehydroxylated at 700 degrees C with diisobutylaluminum hydride, i-Bu2AlH, gives after thermal treatment a single-site tetrahedral aluminum hydride with high selectivity. The starting aluminum isobutyl and the final aluminum hydride have been fully characterized by FT-IR, advanced SS NMR spectroscopy (H-1, C-13, multiple quanta (MQ) 2D H-1-H-1, and Al-27), and elemental analysis, while DFT calculations provide a rationalization of the occurring reactivity. Trimeric i-Bu2AlH reacts selectively with surface silanols without affecting the siloxane bridges. Its analogous hydride catalyzes ethylene polymerization. Indeed, catalytic tests show that this single aluminum hydride site is active in the production of a high-density polyethylene (HDPE)

Substituent effect on the intramolecular hydrogen bond and the proton transfer process in pyrimidine azo dye : A computional study

This study provides a complete analysis of the electronic and photophysical properties of, the derivative of uracil, IsoOrotic (IOA) azo dyes. The ability of the dye to work as an excited state intramolecular proton transfer (ESIPT) was investigated by using Density Functional Theory (DFT) and Time Dependent Density Functional Theory (TD-DFT) methods. The effect of electron-donating substituents (CH3 and NMe2) and an electron-withdrawing one (NO2) was examined. In addition, the effect of the solvent polarity on the ESIPT process is studied. All the geometrical structures in the singlet ground (S0) and excited (S1) states, were optimized using B3LYP/6–311 + G** level of theory. The intramolecular hydrogen bond parameters (IHBs), and the Infra-Red vibrational analysis of the O-H bond show that the IHBs are enhanced in the S1 state. Furthermore, the absorption and emission spectra were simulated and the values of stokes shifts were observed. The PAIOA derivative with an electron withdrawing group shows large stokes shift compared with those having electron-donating ones. Therefore, we can safely conclude that the substituent groups and the different solvents are extremely impactful on the ESIPT process