Physicochemical Characterization of Regional Clay: Application to Phenol Adsorption

Phenol is one of the most toxic pollutants found in industrial waste. This work focuses on the removal of phenol using clay from the Sale region. Adsorbent was characterized by X-ray fluorescence spectroscopy, X-ray diffraction, infrared spectroscopy, and scanning electron microscopy. The chemical analysis of this clay shows that the percentage of silicon and aluminium is quite high, and the percentage of calcium and iron is relatively high, so this material is rich in muscovite, quartz, and calcite. In addition to the presence of titanium dioxide (TiO2), which can give it a property of degradation of organic compounds under ultraviolet light, the pHPZC zero point of our material is 7.4. The results showed that the adsorption of phenol was well fitted by the pseudo-second-order kinetic model and the Langmuir and Freundlich isotherms and that the best retention is obtained at a pH between 3 and 8

A Novel CPW BandPass Filter Integrating Periodic Rectangular Slot Cells

In this paper, we introduce the design and the achievement of a Bandpass filter structure based on the use of rectangular slot cell. The originality of this work is to achieve a coplanar filter easy to integrate with microwave planar circuits and having a wide frequency bandwidth. The proposed bandpass filter is a low cost and compact planar filter structure. The final circuit is simulated by using two electromagnetic solvers, ADS and HFSS. The validation into simulation is based on using optimization methods integrated into the both solvers. Simulations have taken into account a high meshing density to cover the whole circuit. The fabricated bandpass filter has an area of 35X31mm2 and having a good insertion loss around -0.75dB in the bandwidth. The comparison between simulation and measurement results presents a good agreement

Assessment of Untreated Coffee Wastes for the Removal of Chromium (VI) from Aqueous Medium

Industrial discharges loaded with heavy metals present several problems for aquatic ecosystems and human health. In this context, the present study aims to evaluate the potential of raw spent coffee grounds to remove chromium from an aqueous medium. A structural and textural study of coffee grounds was carried out by FTIR, XRD, and TGA analysis. The optimum conditions for the removal of Cr(VI), for a solution with an initial concentration of 100 mg/l, were adsorbent dose 2.5 g/l, pH 4.0, and contact time 90 min. The adsorption equilibrium results show that the Langmuir isotherm best describes the process with an adsorption capacity of 42.9 mg/g and that the adsorption kinetics follows the pseudosecond-order model. The calculated thermodynamic parameters showed that the adsorption is exothermic and spontaneous. The activation energy value (Ea) indicated that the retention is physisorptive in nature. The regeneration of the adsorbent was carried out by three eluents, among which HCl was the best. Finally, a brief cost estimation showed the great potential of coffee grounds as a low-cost adsorbent

Exploitation of Bentonite for Wastewater Treatment

Bentonite is a clay with interesting surface properties (affinity for water, adsorption capacity for electro-positive compounds….). The characteristics and clarifying properties of bentonite from various companies are the subject of numerous studies. The present work focuses on the study of the efficiency of bentonite and modified bentonite to purify aqueous solutions containing organic pollutants such as phenol. First, before starting the adsorption study, a physical–chemical characterization of the clay by FTIR, BET and XRD techniques was undertaken. The specific surface of the bentonite is calculated by BET. Then, the study of isotherms and kinetics of phenol adsorption on commercial BTC showed that this pollutant can be removed from liquid effluents with a significant percentage. Langmuir and Freundlich models were applied. Finally, the kinetic study performed by UV–Visible was reproduced by FTIR spectroscopy

Valorization of Lignocellulosic Wastes Material for Efficient Adsorption of a Cationic Azo Dye and Sludge Recycling as a Reinforcement of Thermoplastic Composite

This work explored the adsorption of Malachite Green (MG) dye by Acorn Pericarp (AP) in the context of biomass valorization. The Acorn Pericarp was analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction. The adsorption capacity under optimal experimental conditions was studied at different adsorbent doses, the initial concentration times of the dye and pH. The results presented in this work on the adsorption kinetics of MG showed that the pseudo-first-order model (R2 = 0.9971) better described the adsorption kinetics at 10−5 M. The experimental isotherms showed that Acorn Pericarp adsorption followed the Langmuir isotherm model (R2 = 0.9889). The thermodynamic study showed that MG adsorption is endothermic (ΔH° > 0) and spontaneous (ΔG° < 0). For a sustainable industry, the sludge was converted into reinforcement of polystyrene using in-situ polymerization with 10% by weight of filler. A morphological and structural analysis was performed using SEM and FTIR, the results of characterization showed that the AP sludge was incorporated well into the PS matrix

Adsorption of Crystal Violet onto an Agricultural Waste Residue: Kinetics, Isotherm, Thermodynamics, and Mechanism of Adsorption

Agricultural waste can be exploited for the adsorption of dyes, due to their low cost, availability, cost-effectiveness, and efficiency. In this study, we were interested in the elimination of crystal violet dye, from aqueous solutions, by adsorption on almond shell-based material, as a low-cost and ecofriendly adsorbent. The almond shells were first analyzed by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction; then, the influence of adsorbent dose, initial dye concentration time, and pH were studied to assess adsorption capacity under optimal experimental conditions. Experimental results indicate that almond shell adsorbent removes about 83% of the dye from the solutions at room temperature and in batch mode; the kinetic study showed that the equilibrium time is about 90 min, and the model of pseudo-second order could very well describe adsorption kinetics. The modulation of adsorption isotherms showed that retention follows the Langmuir model. The thermodynamic study has shown that the adsorption is endothermic (ΔH° > 0) and spontaneous (ΔG° < 0)

Efficient Adsorption Removal of an Anionic Azo Dye by Lignocellulosic Waste Material and Sludge Recycling into Combustible Briquettes

In recent years, the removal of dyes has emerged as a significant problem that attracted several researchers. The search for green and eco-friendly adsorbents has been a never-ending task in environmental protection to overcome this issue. Herein, almond shells (AS) were used as an adsorbent to remove methyl orange (MO) from aqueous solutions. The AS was characterized using several techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). Adsorption experiments were carried out under different pH, temperature, and AS particle size conditions. Kinetic and isothermal studies revealed that MO adsorption on the AS reached equilibrium at 90 min, following the pseudo-second-order (PSO) kinetic model. The Langmuir adsorption isotherm was found the suitable adsorption model for MO adsorption on AS, showing a maximum adsorption capacity of 15.63 mg/g. Thermodynamic parameters such as the change in standard enthalpy (ΔH°), the change in standard entropy (ΔS°), and the change in standard free energy (ΔG°) indicated that the MO dye adsorption process is non-spontaneous, endothermic, and physical, which was further confirmed from FTIR analysis of AS samples after adsorption. The contaminated sludge was converted into biochar by slow pyrolysis at a temperature of 400 °C for 2 h. Biochar has been exploited for the manufacture of combustible briquettes

Efficient Adsorption Removal of an Anionic Azo Dye by Lignocellulosic Waste Material and Sludge Recycling into Combustible Briquettes

In recent years, the removal of dyes has emerged as a significant problem that attracted several researchers. The search for green and eco-friendly adsorbents has been a never-ending task in environmental protection to overcome this issue. Herein, almond shells (AS) were used as an adsorbent to remove methyl orange (MO) from aqueous solutions. The AS was characterized using several techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). Adsorption experiments were carried out under different pH, temperature, and AS particle size conditions. Kinetic and isothermal studies revealed that MO adsorption on the AS reached equilibrium at 90 min, following the pseudo-second-order (PSO) kinetic model. The Langmuir adsorption isotherm was found the suitable adsorption model for MO adsorption on AS, showing a maximum adsorption capacity of 15.63 mg/g. Thermodynamic parameters such as the change in standard enthalpy (&Delta;H&deg;), the change in standard entropy (&Delta;S&deg;), and the change in standard free energy (&Delta;G&deg;) indicated that the MO dye adsorption process is non-spontaneous, endothermic, and physical, which was further confirmed from FTIR analysis of AS samples after adsorption. The contaminated sludge was converted into biochar by slow pyrolysis at a temperature of 400 &deg;C for 2 h. Biochar has been exploited for the manufacture of combustible briquettes

Comparative Study on Adsorption of Crystal Violet and Chromium (VI) by Activated Carbon Derived from Spent Coffee Grounds

In the context of the circular economy, used coffee grounds were transformed into powdered activated carbon by chemical activation using potassium hydroxide. Its characterisation was conducted in comparison with that of a commercial activated carbon by scanning electron microscopy (SEM) coupled with energy dispersive X-ray microanalysis (EDX), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Boehm titration, and point zero charge (pHPZC) and by determination of the methylene blue number (MBN) and the iodine number (IN). Performance of the prepared activated carbon was tested in the adsorption of the cationic dye crystal violet (CV) and hexavalent chromium. Batch adsorption tests were carried out and the effects of operating parameters were studied. The results collected on the adsorption kinetics show that the adsorption followed pseudo-second order kinetics and that the Langmuir isotherm best fits the equilibrium data for crystal violet and hexavalent chromium. The thermodynamic study showed that the adsorption of both adsorbates is spontaneous and exothermic and leads to a decrease in disorder at the solid–liquid interfaces. These results indicate that this activated carbon can be used as an alternative adsorbent to remove cationic dyes and heavy metals from aqueous solutions