New Flame Retardant and Antimicrobial Paints Based on Epoxy Paint Incorporated by Hexachlorocylodiphosphazane Derivatives for Protective Coating

Flame retardants can be incorporated into polymeric material either as additives or as reactive materials. Additive type flame retardants are widely used by means of blending them with a specific polymeric material. In this particular research, hexachlorocylodiphosphazane derivatives type (I-II) were synthesized for use as flame retardant and antimicrobial additives with epoxy varnish. These additives are physically incorporated into the epoxy varnish formula. Experimental coatings were manufactured on a laboratory scale and applied by brush on wood and steel panels. The fire retardant ability of each coating type was characterized using the limiting oxygen index (LOI) test. The mechanical properties of these flame retardants were also examined to evaluate the drawbacks of the additives. Results of the LOI indicated that coating with these compounds containing chlorine, nitrogen and phosphorus exhibit a very good retardant effect, when blended with epoxy varnish comparing with the blanket sample which not contain on the hexachlorocylodiphosphazane derivative as a additives. The hexachlorocylodiphosphazane derivative also exhibit mild results as preservative against microbiological attack. The mechanical properties of the painted dry films were investigated acordinting to ASTM

New water-based copolymer nanoparticles and their use as eco-friendly binders for industry of flexographic ink, part I

Purpose: The purpose of this paper is to prepare, characterise and evaluate nano-emulsions of copolymers of various compositions as eco-friendly binders for flexographic ink industry. Design/methodology/approach: Various nano-emulsions of copolymers were prepared using styrene (St), butyl acrylate (BuAc), acrylic acid (AA) and acrylamide (AAm) monomers by means of a conventional seeded emulsion polymerisation technique, using K2S2O8 as the initiator. The characterisation of the prepared emulsions was performed using Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), gel permeation chromatography (GPC) and transmission electron microscopy (TEM). A selection of copolymers was formulated with pigments and additional ingredients, as water-based flexographic inks. The inks were characterised for their viscosity, pH, degree of dispersion, water resistance and colour density. Findings: It was found that the low viscosity of the prepared copolymers may reduce the film thickness of the flexographic inks and may also increase the spreading of the ink on the surface. As a result, stable modified polyacrylate-based latex with improved physico-mechanical properties were obtained. The prepared latexes were showed improving and enhancing in water resistance; gloss values, and the print density that ranged from 2.06 to 2.51 and the maximum gloss values (39 and 48) were also obtained. Also, these binders provide excellent adhesion properties for both the pigment particles and the base paper. Practical implications: This study focuses on the preparation of new water-based copolymer nanoparticles and their use as eco-friendly binders for flexographic ink industry. Social implications: The ink formulations developed could find use in industrial-scale printing. Originality/value: Eco-friendly environment ink formulations for printing on paper substrates are novel

Adult sex identification using digital radiographs of the proximal epiphysis of the femur at Suez Canal University Hospital in Ismailia, Egypt

AbstractSex identification is an important step toward establishing identity from unknown human remains. The study was performed to test accuracy of sex identification using digital radiography of proximal epiphysis of femur among known cross-sectional population at Suez Canal region. Seventy-two radiographs of femur of living non-pathologic individuals were included. Original sample was divided into two equal groups of females and males (24 each). Test sample (group 3) included 24 radiographs. Six landmarks (A–F) were selected and 15 distances were generated representing all possible combinations of these landmarks. A is a point on the shaft under lower end of lesser trochanter, B is a point on the shaft. A–B is perpendicular to the axis of the shaft. C and D are points on femoral neck. E and F are points on femoral head. In original sample, mean and standard deviation were calculated, then accuracy, sensitivity and specificity. In test sample, the 15 distances were used to identify sex of that radiograph according to the cut-off value made from original sample.In original sample, CE and EF were most distinctive measurements for sexual dimorphism. AB and CF showed least accuracy (66.7% and 70.8%). BF, CE and EF were most sensitive for identification.In test sample, CE and EF showed 100% accuracy. AB and CF showed least accuracy (54.2% and 62.5%). AC, AE, BC, BE, BF, CE and EF were most sensitive for identification.Digital radiography of femur can be an alternative measurement used in sex identification in Egyptian population

Subclinical hypothyroidism among Egyptian children with systemic lupus erythematosus

Background: Thyroid autoimmune diseases have been associated with systemic lupus erythematosus (SLE). Both hypothyroidism and hyperthyroidism are seen, but hypothyroidism is the most common abnormality. Subclinical hypothyroidism (SCH) has been reported among adult lupus patients. SCH is not without risk as it might contribute to a proatherogenic state. Objectives: This study was aimed to assess the frequency of SCH in a group of Egyptian children with SLE and its effects on the serum lipids. Methods: Forty patients with pediatric SLE who regularly follow up at our center were enrolled in this study. They were subjected to routine laboratory investigations of SLE and measurement of serum lipids (serum triglycerides, cholesterol, LDL and HDL) as well as free thyroxine (T4), thyroid stimulating hormone (TSH) and anti-thyroperoxidase antibody (anti-TPO-ab) titre. SLE activity was assessed using the systemic lupus erythematosus disease activity index (SLEDAI). Results: Six patients (15%) were found to have SCH while the remaining 34 patients (85%) had normal thyroid function. Anti-TPO-abs were positive in 4 out of the 6 (66.6 %) SLE patients with SCH and in 20 out of the 34 (58.8%) SLE patients with normal thyroid function. In SLE patients with SCH, TSH correlated positively yet insignificantly with anti-TPO-ab titre and the duration of SLE (p = 0.17, p = 0.12, respectively). There were no statistically significant correlations between the serum lipids of SLE patients with SCH and their thyroid function or anti-TPO-ab titre. Conclusion: SCH is not uncommon among children with SLE. This SCH does not seem to affect serum lipids. However, further longitudinal studies on wider scales are needed to assess the long term effects of SCH in those patients.Keywords: SLE, anti-thyroperoxidase antibodies, subclinical hypothyroidismEgypt J Pediatr Allergy Immunol 2011;9(2):87-9

GINGER ETHANOLIC EXTRACT, GINGER OIL OR RICE BRAN OIL INDUCED HEPATOPROTECTIVE EFFECT AGAINST FATTY LIVER IN RATS

Hepatoprotective effect of ethanol extract of ginger, ginger oil or rice bran oil against fatty liver disease which induced by ethanol stress was investigated in the present study. Thirty six (36) male albino rats were classified into 6 groups as follows: 1- Normal control (NC), 2- Positive control (induced fatty liver by ethanolic stress) (PC+), 3- rats group administered ethanol and ginger extract (GE group), 4- rats group administered ethanol and ginger oil (GO group), 5- rats group administered ethanol and rice bran oil (RBO group) and 6- rats group administered ethanol and DMSO (DMSO  control group, because GE, GO and RBO were dissolved in DMSO as a vehicle). Results revealed that hepatic triglycerides was significantly (p≤0.05) raised to 80.7 mg/g liver, in positive control (PC+), compared to 15.98 mg/g liver in normal control (NC). Also significant increase (p≤0.05) in levels of ALT (69.41 U/L), AST (62.98 U/L) and ALP (121.65 U/L) in PC+, compared to their levels in NC (23.35 U/L), (27.95 U/L) and (73.45 U/L) respectively. In addition, high significant level was observed in serum triglycerides (214.37 mg/dl), total cholesterol (TC) (99.81 mg/dl) and LDL cholesterol (47.75 mg/dl) in PC+, compared with its values in NC group: (74.22 mg/dl), (31.45 mg/dl), (4.21 mg/dl) respectively. However, significant (p≤0.05) decrease was noticed in HDL cholesterol level (9.18 mg/dl) in PC+, compared to NC (12.39 mg/dl). On the other hand, treatment by ethanolic ginger extract (200 mg/kg body weight) showed a hepatoprotective effect which confirmed by remediation the values of hepatic TG, ALT, AST, ALP, TP, Alb, besides serum TG, TC, HDL-C and LDL-C in GE group as compared with their values in NC and PC+. Moreover, treatment by ginger oil (200 mg/kg body weight) and rice bran oil (200 mg/kg body weight) displayed a protective effect in GO or RBO groups, but lower than GE. In addition, ethanol extract of ginger disclosed very high antioxidant activity (IC50 = 18.25 µg/ml) compared to both ginger oil (IC50 = 6714.38 µg/ml) or rice bran oil (IC50 = 1409.57 µg/ml). Finally the present study indicates that ethanol extract of ginger showed hepatoprotective effect more than either ginger oil or rice bran oil

Mycobacterial CYP121 as a target for anti-TB drug discovery

Despite the introduction of the first line treatment regimen forty years ago and the continuous trials since that time to introduce new regimens, tuberculosis (TB) is considered to be the cause of considerable mortality worldwide. Recent research highlighted the Mycobacterium tuberculosis (Mtb)CYP450s as potential drug targets. This article reviews mycobacterial CYP121 as a target for anti-TB drug discovery

Synthesis and characterisation of sulphonamide (Schiff base) ligand and its copper metal complex and their efficiency in polyurethane varnish as flame retardant and antimicrobial surface coating additives

Sulphonamide compounds are present in many bioactive compounds owing to their multiple biological applications, even their metal complexes. The study reported in this paper focused on the synthesis of a sulphonamide ligand (Schiff base) and its Cu metal complex and their possible applications as antimicrobial and flame retardant additives in polyurethane formulations for surface coating application. Thus, selected divalent (Cu II) metal complex of 4-((E)-(4-hydroxy-3-((E)-(p-tolylimino)methyl) phenyl) diazenyl)-N-(5-methylisoxazol-3-yl) benzenesulphonamide was prepared and characterised using a combination of elemental analysis, Fourier Transform Infrared, Proton Nuclear Magnetic Resonance and mass spectroscopy. The prepared Schiff base ligand and its Cu metal complex were physically added to polyurethane varnish to give varnish coating formulations at a laboratory scale and then applied onto pretreated wood and steel panels using a brush. The oxygen index, Gram negative bacteria; Gram positive bacteria and fungi values obtained indicated that the polyurethane varnish that contained the prepared ligand and its Cu metal complex as additives exhibited very good flame retardant and antimicrobial properties, respectively. It was also found that the metal complex had outperformed the ligand. The physical and mechanical resistance of the coatings was also studied, in order to assess any disadvantages owing to the incorporation of the additives. It was found that the additives did not influence the flexibility, hardness and adhesion of coating films prepared using the polyurethane varnish. The gloss of the polyurethane varnish film was improved due to the incorporation of the aromatic ring into the formulation

High-density SNP-based association mapping of seed traits in fenugreek reveals homology with clover

Fenugreek as a self-pollinated plant is ideal for genome-wide association mapping where traits can be marked by their association with natural mutations. However, fenugreek is poorly investigated at the genomic level due to the lack of information regarding its genome. To fill this gap, we genotyped a collection of 112 genotypes with 153,881 SNPs using double digest restriction site-associated DNA sequencing. We used 38,142 polymorphic SNPs to prove the suitability of the population for association mapping. One significant SNP was associated with both seed length and seed width, and another SNP was associated with seed color. Due to the lack of a comprehensive genetic map, it is neither possible to align the newly developed markers to chromosomes nor to predict the underlying genes. Therefore, systematic targeting of those markers to homologous genomes of other legumes can overcome those problems. A BLAST search using the genomic fenugreek sequence flanking the identified SNPs showed high homology with several members of the Trifolieae tribe indicating the potential of translational approaches to improving our understanding of the fenugreek genome. Using such a comprehensively-genotyped fenugreek population is the first step towards identifying genes underlying complex traits and to underpin fenugreek marker-assisted breeding programs

New modified poly(ester amide) resins and their uses as a binder for surface coating with different applications

This paper aims to prepare a new modified poly(ester amide) (PEA) resins and use it as a binder for anticorrosive and antimicrobial coatings. Design/methodology/approach New modified PEA compositions were prepared based on 4-amino-N, N-bis(2-hydroxyethyl) benzamide (AHEB) as the ingredient source of the polyol used and evaluated as vehicles for surface coating. The structure of the modifier and PEA resin was confirmed by FT-IR, H¹-NMR, MW, thermogravimetric analysis and scanning electron microscope studies. Coatings of 50±5 µm thickness were applied to the surface of glass panels and mild steel strips by means of a brush. The coating performance of the resins was evaluated using international standard test methods and involved the measurement of phyisco-mechanical properties and chemical resistance. Findings The tests carried out revealed that the modified PEA based on AHEB enhanced both phyisco-mechanical and chemical properties. Also, the resins were incorporated within primer formulations and evaluated as anti-corrosive and antimicrobial single coatings. The results illustrate that the introduction of AHEB, within the resin structure, improved the film performance and enhances the corrosion resistance and antimicrobial activity performance of PEA resins. Practical implications The modified PEA compounds can be used as binders in paint formulations to improve the chemical, physical, corrosion resistance and antimicrobial activity properties. Originality/value Modified PEA resins are cheaper and can be used to replace other more expensive binders. These modified PEA resins can compensate successfully for the presence of many the anticorrosive and antimicrobial paint formulations, and thus, lower the costs. The main advantage of these binders is that they combine the properties of both polyester and polyamide resins based on nitrogenous compound, are of lower cost and they also overcome the disadvantages of both its counterparts. Also, they can be applied in other industrial applications