63 research outputs found
Single-shot laser-driven neutron resonance spectroscopy for temperature profiling
Lan Z., Arikawa Y., Mirfayzi S.R., et al. Single-shot laser-driven neutron resonance spectroscopy for temperature profiling. Nature Communications 15, 5365 (2024); https://doi.org/10.1038/s41467-024-49142-y.The temperature measurement of material inside of an object is one of the key technologies for control of dynamical processes. For this purpose, various techniques such as laser-based thermography and phase-contrast imaging thermography have been studied. However, it is, in principle, impossible to measure the temperature of an element inside of an object using these techniques. One of the possible solutions is measurements of Doppler brooding effect in neutron resonance absorption (NRA). Here we present a method to measure the temperature of an element or an isotope inside of an object using NRA with a single neutron pulse of approximately 100 ns width provided from a high-power laser. We demonstrate temperature measurements of a tantalum (Ta) metallic foil heated from the room temperature up to 617 K. Although the neutron energy resolution is fluctuated from shot to shot, we obtain the temperature dependence of resonance Doppler broadening using a reference of a silver (Ag) foil kept to the room temperature. A free gas model well reproduces the results. This method enables element(isotope)-sensitive thermometry to detect the instantaneous temperature rise in dynamical processes
Magnetized Fast Isochoric Laser Heating for Efficient Creation of Ultra-High-Energy-Density States
The quest for the inertial confinement fusion (ICF) ignition is a grand
challenge, as exemplified by extraordinary large laser facilities. Fast
isochoric heating of a pre-compressed plasma core with a high-intensity
short-pulse laser is an attractive and alternative approach to create
ultra-high-energy-density states like those found in ICF ignition sparks. This
avoids the ignition quench caused by the hot spark mixing with the surrounding
cold fuel, which is the crucial problem of the currently pursued ignition
scheme. High-intensity lasers efficiently produce relativistic electron beams
(REB). A part of the REB kinetic energy is deposited in the core, and then the
heated region becomes the hot spark to trigger the ignition. However, only a
small portion of the REB collides with the core because of its large
divergence. Here we have demonstrated enhanced laser-to-core energy coupling
with the magnetized fast isochoric heating. The method employs a
kilo-tesla-level magnetic field that is applied to the transport region from
the REB generation point to the core which results in guiding the REB along the
magnetic field lines to the core. 7.7 1.3 % of the maximum coupling was
achieved even with a relatively small radial area density core (
0.1 g/cm). The guided REB transport was clearly visualized in a
pre-compressed core by using Cu- imaging technique. A simplified
model coupled with the comprehensive diagnostics yields 6.2\% of the coupling
that agrees fairly with the measured coupling. This model also reveals that an
ignition-scale areal density core ( 0.4 g/cm) leads to much
higher laser-to-core coupling ( 15%), this is much higher than that achieved
by the current scheme
In-Target Proton–Boron Nuclear Fusion Using a PW-Class Laser
Nuclear reactions between protons and boron-11 nuclei (p–B fusion) that were used to yield energetic α-particles were initiated in a plasma that was generated by the interaction between a PW-class laser operating at relativistic intensities (~3 × 10^19 W/cm2) and a 0.2-mm thick boron nitride (BN) target. A high p–B fusion reaction rate and hence, a large α-particle flux was generated and measured, thanks to a proton stream accelerated at the target’s front surface. This was the first proof of principle experiment to demonstrate the efficient generation of α-particles (~10^10/sr) through p–B fusion reactions using a PW-class laser in the “in-target” geometry
Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments
In high-energy-density physics, including inertial fusion energy using high-power lasers, doping tracer atoms and deuteration of target materials play an important role in diagnosis. For example, a low-concentration Cu dopant acts as an x-ray source for electron temperature detection while a deuterium dopant acts as a neutron source for fusion reaction detection. However, the simultaneous achievement of Cu doping, a deuterated polymer, mechanical toughness and chemical robustness during the fabrication process is not so simple. In this study, we report the successful fabrication of a Cu-doped deuterated target. The obtained samples were characterized by inductively coupled plasma optical emission spectrometry, differential scanning calorimetry and Fourier transform infrared spectroscopy. Simultaneous measurements of Cu K-shell x-ray emission and beam fusion neutrons were demonstrated using a petawatt laser at Osaka University.Ikeda T., Kaneyasu Y., Hosokawa H., et al. Fabrication of high-concentration Cu-doped deuterated targets for fast ignition experiments. Nuclear Fusion 63, 016010 (2023); https://doi.org/10.1088/1741-4326/aca2ba
Hot Electron Spectra in Plain, Cone and Integrated Targets for FIREX-I using Electron Spectrometer
The traditional fast ignition scheme is that a compressed core created by an imploding laser is auxiliary heated and ignited by the hot electrons (produced by a short pulse laser guided through the cone). Here, the most suitable target design for fast ignition can be searched for by comparison of the spectra between varied targets using an electron spectrometer
Hot electron and ion spectra on blow-off plasma free target in GXII-LFEX direct fast ignition experiment
Polystyrene deuteride shell targets with two holes were imploded by the Gekko XII laser and additionally heated by the LFEX laser in a direct fast ignition experiment. In general, when an ultra-intense laser is injected into a blow-off plasma created by the imploding laser, electrons are generated far from the target core and the energies of electrons increase because the electron acceleration distance has been extended. The blow-off plasma moves not only to the vertical direction but to the lateral direction against the target surface. In a shell target with holes, a lower effective electron temperature can be realized by reducing the inflow of the implosion plasma onto the LFEX path, and high coupling efficiency can be expected. The energies of hot electrons and ions absorbed into the target core were calculated from the energy spectra using three electron energy spectrometers and a neutron time-of-flight measurement system, Mandala. The ions have a large contribution of 74% (electron heating of 4.9 J and ion heating of 14.1 J) to target heating in direct fast ignition
- …