Global trends and correlates of covid-19 vaccination hesitancy: Findings from the icare study

The success of large-scale COVID-19 vaccination campaigns is contingent upon people being willing to receive the vaccine. Our study explored COVID-19 vaccine hesitancy and its correlates in eight different countries around the globe. We analyzed convenience sample data collected between March 2020 and January 2021 as part of the iCARE cross-sectional study. Univariate and multivariate statistical analyses were conducted to explore the correlates of vaccine hesitancy. We included 32,028 participants from eight countries, and observed that 27% of the participants exhibited vaccine hesitancy, with increases over time. France reported the highest level of hesitancy (47.3%) and Brazil reported the lowest (9.6%). Women, younger individuals (≤29 years), people living in rural areas, and those with a lower perceived income were more likely to be hesitant. People who previously received an influenza vaccine were 70% less likely to report COVID-19 vaccine hesitancy. We observed that people reporting greater COVID-19 health concerns were less likely to be hesitant, whereas people with higher personal financial concerns were more likely to be hesitant. Our findings indicate that there is substantial vaccine hesitancy in several countries, with cross-national differences in the magnitude and direction of the trend. Vaccination communication initiatives should target hesitant individuals (women, younger adults, people with lower incomes and those living in rural areas), and should highlight the immediate health, social and economic benefits of vaccination across these settings. Country-level analyses are warranted to understand the complex psychological, socio-environmental, and cultural factors associated with vaccine hesitancy

Combined effect of both surface finish and sub‐surface porosity on component strength under repeated load conditions

High duty engineering component life is usually demonstrated through extensive testing and statistical analysis applied to empirical curve-fit equations. Because of this, the extent of the testing required is huge and costly: it must consider the load cycle range and test to high numbers of cycles. Additive Manufacturing (AM) for high duty components has brought to the fore the question of the effect of porosity and surface roughness on fatigue life, and how the true life of a critical component can be assessed conservatively. The authors propose the first step towards the development of a fatigue model based on well-established engineering physics principles, by creating computational specimens with modelled surface roughness and porosity, and subjected to cyclic loading using Finite Element Analysis. They show that the combination of roughness features and sub-surface pores leads to an equivalent plastic strain (PEEQ) distribution pattern that suggests an emergent physical process that has not been reported before, and which indicates that the component strength and life reduction arising from surface roughness can be made significantly worse by the presence of porosity. The development of such phenomenological understanding should lead to improved life prediction techniques, more cost effective test procedures, and the development of better AM methods

Strategies for implementing placental transfusion at birth: a systematic review

Background: Enhanced placental transfusion reduces adverse neonatal outcomes, including death. Despite being endorsed by the World Health Organization in 2012, the method has not been adopted widely in practice. Methods: We performed a systematic literature search and included quality improvement projects on placental transfusion at birth and studies on barriers to implementation. We extracted information on population, methods of implementation, obstacles to implementation, and strategies to overcome them. Results: We screened 99 studies out of which 18 were included in the review. The preferred methods of implementation were protocol development (86% of studies) reinforced by targeted education (64% of studies) and multidisciplinary team involvement (43% of studies). Barriers to implementation were mentioned in 12 studies and divided into four categories: general factors such as lack of staff awareness (5 studies) and professional resistance to change (5 studies); obstetrician‐specific concerns, including the impact during cesarean (3 studies) and the risk of postpartum hemorrhage (3 studies); pediatrician‐specific concerns, including the need for resuscitation (5 studies), risk of jaundice (3 studies), and polycythemia (2 studies); and logistical difficulties. The main strategies to facilitate placental transfusion at birth included effective multidisciplinary team collaboration, protocol development, targeted education, and constructive feedback sessions. Conclusions: Placental transfusion implementation requires a multidisciplinary approach, with obstetricians, midwives, nurses, and pediatricians central to adoption of the practice. Understanding the obstacles to implementation informs strategies to increase placental transfusion adoption of practice worldwide. We suggest a stepwise approach to implementation and enhancement of placental transfusion into practice

Living biointerfaces based on non-pathogenic bacteria to direct cell differentiation

Genetically modified Lactococcus lactis, non-pathogenic bacteria expressing the FNIII7-10 fibronectin fragment as a protein membrane have been used to create a living biointerface between synthetic materials and mammalian cells. This FNIII7-10 fragment comprises the RGD and PHSRN sequences of fibronectin to bind α5β1 integrins and triggers signalling for cell adhesion, spreading and differentiation. We used L. lactis strain to colonize material surfaces and produce stable biofilms presenting the FNIII7-10 fragment readily available to cells. Biofilm density is easily tunable and remains stable for several days. Murine C2C12 myoblasts seeded over mature biofilms undergo bipolar alignment and form differentiated myotubes, a process triggered by the FNIII7-10 fragment. This biointerface based on living bacteria can be further modified to express any desired biochemical signal, establishing a new paradigm in biomaterial surface functionalisation for biomedical applications

A comparative framework: how broadly applicable is a 'rigorous' critical junctures framework?

The paper tests Hogan and Doyle's (2007, 2008) framework for examining critical junctures. This framework sought to incorporate the concept of ideational change in understanding critical junctures. Until its development, frameworks utilized in identifying critical junctures were subjective, seeking only to identify crisis, and subsequent policy changes, arguing that one invariably led to the other, as both occurred around the same time. Hogan and Doyle (2007, 2008) hypothesized ideational change as an intermediating variable in their framework, determining if, and when, a crisis leads to radical policy change. Here we test this framework on cases similar to, but different from, those employed in developing the exemplar. This will enable us determine whether the framework's relegation of ideational change to a condition of crisis holds, or, if ideational change has more importance than is ascribed to it by this framework. This will also enable us determined if the framework itself is robust, and fit for the purposes it was designed to perform — identifying the nature of policy change

A CADM3 variant causes Charcot-Marie-Tooth disease with marked upper limb involvement

The CADM family of proteins consists of four neuronal specific adhesion molecules (CADM1, CADM2, CADM3 and CADM4) that mediate the direct contact and interaction between axons and glia. In the peripheral nerve, axon-Schwann cell interaction is essential for the structural organization of myelinated fibres and is primarily mediated by the binding of CADM3, expressed in axons, to CADM4, expressed by myelinating Schwann cells. We have identified—by whole exome sequencing—three unrelated families, including one de novo patient, with axonal Charcot-Marie-Tooth disease (CMT2) sharing the same private variant in CADM3, Tyr172Cys. This variant is absent in 230 000 control chromosomes from gnomAD and predicted to be pathogenic. Most CADM3 patients share a similar phenotype consisting of autosomal dominant CMT2 with marked upper limb involvement. High resolution mass spectrometry analysis detected a newly created disulphide bond in the mutant CADM3 potentially modifying the native protein conformation. Our data support a retention of the mutant protein in the endoplasmic reticulum and reduced cell surface expression in vitro. Stochastic optical reconstruction microscopy imaging revealed decreased co-localization of the mutant with CADM4 at intercellular contact sites. Mice carrying the corresponding human mutation (Cadm3Y170C) showed reduced expression of the mutant protein in axons. Cadm3Y170C mice showed normal nerve conduction and myelin morphology, but exhibited abnormal axonal organization, including abnormal distribution of Kv1.2 channels and Caspr along myelinated axons. Our findings indicate the involvement of abnormal axon-glia interaction as a disease-causing mechanism in CMT patients with CADM3 mutations. A correction has been published: Brain, Volume 144, Issue 7, July 2021, Page e64, https://doi.org/10.1093/brain/awab18

Construct-level predictive validity of educational attainment and intellectual aptitude tests in medical student selection: meta-regression of six UK longitudinal studies

Background: Measures used for medical student selection should predict future performance during training. A problem for any selection study is that predictor-outcome correlations are known only in those who have been selected, whereas selectors need to know how measures would predict in the entire pool of applicants. That problem of interpretation can be solved by calculating construct-level predictive validity, an estimate of true predictor-outcome correlation across the range of applicant abilities. Methods: Construct-level predictive validities were calculated in six cohort studies of medical student selection and training (student entry, 1972 to 2009) for a range of predictors, including A-levels, General Certificates of Secondary Education (GCSEs)/O-levels, and aptitude tests (AH5 and UK Clinical Aptitude Test (UKCAT)). Outcomes included undergraduate basic medical science and finals assessments, as well as postgraduate measures of Membership of the Royal Colleges of Physicians of the United Kingdom (MRCP(UK)) performance and entry in the Specialist Register. Construct-level predictive validity was calculated with the method of Hunter, Schmidt and Le (2006), adapted to correct for right-censorship of examination results due to grade inflation. Results: Meta-regression analyzed 57 separate predictor-outcome correlations (POCs) and construct-level predictive validities (CLPVs). Mean CLPVs are substantially higher (.450) than mean POCs (.171). Mean CLPVs for first-year examinations, were high for A-levels (.809; CI: .501 to .935), and lower for GCSEs/O-levels (.332; CI: .024 to .583) and UKCAT (mean = .245; CI: .207 to .276). A-levels had higher CLPVs for all undergraduate and postgraduate assessments than did GCSEs/O-levels and intellectual aptitude tests. CLPVs of educational attainment measures decline somewhat during training, but continue to predict postgraduate performance. Intellectual aptitude tests have lower CLPVs than A-levels or GCSEs/O-levels. Conclusions: Educational attainment has strong CLPVs for undergraduate and postgraduate performance, accounting for perhaps 65% of true variance in first year performance. Such CLPVs justify the use of educational attainment measure in selection, but also raise a key theoretical question concerning the remaining 35% of variance (and measurement error, range restriction and right-censorship have been taken into account). Just as in astrophysics, ‘dark matter’ and ‘dark energy’ are posited to balance various theoretical equations, so medical student selection must also have its ‘dark variance’, whose nature is not yet properly characterized, but explains a third of the variation in performance during training. Some variance probably relates to factors which are unpredictable at selection, such as illness or other life events, but some is probably also associated with factors such as personality, motivation or study skills

Evolutionary Repercussions of Avian Culling on Host Resistance and Influenza Virulence

Keeping pandemic influenza at bay is a global health priority. Of particular concern is the continued spread of the influenza subtype H5N1 in avian populations and the increasing frequency of transmission to humans. To decrease this threat, mass culling is the principal strategy for eradicating influenza in avian populations. Although culling has a crucial short-term epidemiological benefit, evolutionary repercussions on reservoir hosts and on the viral population have not been considered.To explore the epidemiological and evolutionary repercussions of mass avian culling, we combine population genetics and epidemiological influenza dynamics in a mathematical model parameterized by clinical, epidemiological, and poultry data. We model the virulence level of influenza and the selection on a dominant allele that confers resistance against influenza [1, 2] in a poultry population. Our findings indicate that culling impedes the evolution of avian host resistance against influenza. On the pathogen side of the coevolutionary race between pathogen and host, culling selects for heightened virulence and transmissibility of influenza.Mass culling achieves a short-term benefit at the expense of long-term detriments: a more genetically susceptible host population, ultimately greater mortality, and elevated influenza virulence

Two Origins for the Gene Encoding α-Isopropylmalate Synthase in Fungi

BACKGROUND: The biosynthesis of leucine is a biochemical pathway common to prokaryotes, plants and fungi, but absent from humans and animals. The pathway is a proposed target for antimicrobial therapy. METHODOLOGY/PRINCIPAL FINDINGS: Here we identified the leuA gene encoding alpha-isopropylmalate synthase in the zygomycete fungus Phycomyces blakesleeanus using a genetic mapping approach with crosses between wild type and leucine auxotrophic strains. To confirm the function of the gene, Phycomyces leuA was used to complement the auxotrophic phenotype exhibited by mutation of the leu3+ gene of the ascomycete fungus Schizosaccharomyces pombe. Phylogenetic analysis revealed that the leuA gene in Phycomyces, other zygomycetes, and the chytrids is more closely related to homologs in plants and photosynthetic bacteria than ascomycetes or basidiomycetes, and suggests that the Dikarya have acquired the gene more recently. CONCLUSIONS/SIGNIFICANCE: The identification of leuA in Phycomyces adds to the growing body of evidence that some primary metabolic pathways or parts of them have arisen multiple times during the evolution of fungi, probably through horizontal gene transfer events

Ultrasensitive plano-concave optical microresonators for ultrasound sensing

Highly sensitive broadband ultrasound detectors are needed to expand the capabilities of biomedical ultrasound, photoacoustic imaging and industrial ultrasonic non-destructive testing techniques. Here, a generic optical ultrasound sensing concept based on a novel plano-concave polymer microresonator is described. This achieves strong optical confinement (Q-factors > 105) resulting in very high sensitivity with excellent broadband acoustic frequency response and wide directivity. The concept is highly scalable in terms of bandwidth and sensitivity. To illustrate this, a family of microresonator sensors with broadband acoustic responses up to 40 MHz and noise-equivalent pressures as low as 1.6 mPa per √Hz have been fabricated and comprehensively characterized in terms of their acoustic performance. In addition, their practical application to high-resolution photoacoustic and ultrasound imaging is demonstrated. The favourable acoustic performance and design flexibility of the technology offers new opportunities to advance biomedical and industrial ultrasound-based techniques