Serviceability limit state of vibrations in under-deck cable-stayed bridges accounting for vehicle-structure interaction

Verification of the serviceability limit state of vibrations due to traffic live loads can be neglected in conventional types of concrete road bridges but becomes critical in the design of slender structures like under-deck cable-stayed bridges. The novelty of the work presented in this article is that an innovative vehicle-bridge interaction model is employed, in which realistic wheel dimensions of heavy trucks, road roughness profiles and the cross slope of the road are considered in nonlinear dynamic analyses of detailed three-dimensional finite element models. An extensive parametric study is conducted to explore the influence of the bridge parameters such as the longitudinal and transverse cable arrangement and the support conditions, in addition to the load modelling, road quality, the wheel size, the transverse road slope and the vehicle position and speed on the response of under-deck cable-stayed bridges. It has been observed that the vibrations perceived by pedestrians can be effectively reduced by concentrating the cable-system below the deck at the bridge centreline. The Fourier amplitude spectrum of the acceleration at critical positions along the deck proved that the response of under-deck cable-stayed bridges is not dominated only by contributions at the fundamental mode and, consequently, the conventional deflection-based methods are not valid to assess the users comfort. Instead, Vehicle-Bridge Interaction analyses are recommended for detailed design, considering the wheel dimensions if the pavement quality is bad and/or if the wheel radius is large. Finally, we verify through multiple approaches that the comfort of pedestrian users is more critical than that of vehicle users. However, the comfort of vehicle users is shown to be significantly affected when the road quality is poor

Indicators for assessing the quality of refractive error care

Significance: Quality refractive error care is essential for reducing vision impairment. Quality indicators and standardized approaches for assessing the quality of refractive error care need to be established. Purpose: This study aimed to develop a set of indicators for assessing the quality of refractive error care and test their applicability in a real-world setting using unannounced standardized patients (USPs). Methods: Patient outcomes and three quality of refractive error care (Q.REC) indicators (1, optimally prescribed spectacles; 2, adequately prescribed spectacles; 3, vector dioptric distance) were developed using existing literature, refraction training standards, and consulting educators. Twenty-one USPs with various refractive errors were trained to visit optical stores across Vietnam to have a refraction, observe techniques, and order spectacles. Spectacles were assessed against each Q.REC indicator and tested for associations with vision and comfort. Results: Overall, 44.1% (184/417) of spectacles provided good vision and comfort. Of the spectacles that met Q.REC indicators 1 and 2, 62.5 and 54.9%, respectively, provided both good vision and comfort. Optimally prescribed spectacles (indicator 1) were significantly more likely to provide good vision and comfort independently compared with spectacles that did not meet any indicator (good vision: 94.6 vs. 85.0%, P =.01; comfortable: 66.1 vs. 36.3%, P <.01). Adequately prescribed spectacles (indicator 2) were more likely to provide good comfort compared with spectacles not meeting any indicator (57.7 vs. 36.3%, P <.01); however, vision outcomes were not significantly different (85.9 vs. 85.0%, P =.90). Good vision was associated with a lower mean vector dioptric distance (P <.01) but not with comfort (P =.52). Conclusions: The optimally prescribed spectacles indicator is a promising approach for assessing the quality of refractive error care without additional assessments of vision and comfort. Using USPs is a practical approach and could be used as a standardized method for evaluating the quality of refractive error care

Treatment of Porphyromonas gulae infection and downstream pathology in the aged dog by lysine-gingipain inhibitor COR388.

COR388, a small-molecule lysine-gingipain inhibitor, is currently being investigated in a Phase 2/3 clinical trial for Alzheimer's disease (AD) with exploratory endpoints in periodontal disease. Gingipains are produced by two species of bacteria, Porphyromonas gingivalis and Porphyromonas gulae, typically associated with periodontal disease and systemic infections in humans and dogs, respectively. P. gulae infection in dogs is associated with periodontal disease, which provides a physiologically relevant model to investigate the pharmacology of COR388. In the current study, aged dogs with a natural oral infection of P. gulae and periodontal disease were treated with COR388 by oral administration for up to 90 days to assess lysine-gingipain target engagement and reduction of bacterial load and downstream pathology. In a 28-day dose-response study, COR388 inhibited the lysine-gingipain target and reduced P. gulae load in saliva, buccal cells, and gingival crevicular fluid. The lowest effective dose was continued for 90 days and was efficacious in continuous reduction of bacterial load and downstream periodontal disease pathology. In a separate histology study, dog brain tissue showed evidence of P. gulae DNA and neuronal lysine-gingipain, demonstrating that P. gulae infection is systemic and spreads beyond its oral reservoir, similar to recent observations of P. gingivalis in humans. Together, the pharmacokinetics and pharmacodynamics of COR388 lysine-gingipain inhibition, along with reduction of bacterial load and periodontal disease in naturally occurring P. gulae infection in the dog, support the use of COR388 in targeting lysine-gingipain and eliminating P. gingivalis infection in humans

Roboteye technology for thermal target tracking using predictive control

© ISARC 2018 - 35th International Symposium on Automation and Robotics in Construction and International AEC/FM Hackathon: The Future of Building Things. All rights reserved. Thermal cameras are widely used in the fatigue analysis of mechanical structures using the thermoelastic effect. Nevertheless, such analysis is hampered due to blurry images resulting from the motion of structure-under-test. To address the issue this paper presents a system that utilizes robotic vision and predictive control. The system comprises of a thermal camera, a vision camera, a RobotEye, and a fiducial detection system. A marker is attached to a thermal target in order to estimate its position and orientation using the proposed detection system. To predict the future position of the thermal moving object, a Kalman filter is used. Finally, the Model Predictive Control (MPC) approach is applied to generate commands for the robot to follow the target. Results of the tracking by MPC are included in this paper along with the performance evaluation of the whole system. The evaluation clearly shows the improvement in the tracking performance of the development for thermal structural analysis

Which Distributions (or Families of Distributions) Best Represent Interval Uncertainty: Case of Permutation-Invariant Criteria

In many practical situations, we only know the interval containing the quantity of interest, we have no information about the probability of different values within this interval. In contrast to the cases when we know the distributions and can thus use Monte-Carlo simulations, processing such interval uncertainty is difficult -- crudely speaking, because we need to try all possible distributions on this interval. Sometimes, the problem can be simplified: namely, it is possible to select a single distribution (or a small family of distributions) whose analysis provides a good understanding of the situation. The most known case is when we use the Maximum Entropy approach and get the uniform distribution on the interval. Interesting, sensitivity analysis -- which has completely different objectives -- leads to selection of the same uniform distribution. In this paper, we provide a general explanation of why uniform distribution appears in different situations -- namely, it appears every time we have a permutation-invariant objective functions with the unique optimum. We also discuss what happens if there are several optima

Cost-effective design & development of a prosthetic hand

The prosthetic hand is used to replace a missing part of a hand, which may be lost through trauma, disease, or congenital conditions in order to restore the normal functions of the hand. The state of the art design and development of prosthetic hands has been well studied and documented. The modern prosthetic hands which are computer-controlled via the means of electromyogram (EMG) signals are very helpful for amputees; however, they are expensive, not always available for low-income populations. This study presents a cost-effective solution for innovative design and development of a prosthetic hand for a patient who lost both hands due to the work accident. Design concepts of the prosthetic hand were successfully developed and tested. Different strategies for cost-effective design and development of the high-value added prosthetic hand are also discussed, including mass-customization and design for additive manufacturing

Firm-specific, country-specific and region-specific competitive advantages: the case of emerging economy MNEs - Thailand

Increasing levels of regional economic integration have created a new source of international competitiveness for MNEs from an emerging economy, Thailand, in the context of ASEAN economic integration. Building on the theoretical framework of firm-specific advantages (FSAs) and country-specific advantages (CSAs) grounded in internalization theory, we introduce region-specific advantages (RSAs) and advance a novel regional dual-double-diamond model to analyse regional competitiveness. Using both primary and secondary data we find that most Thai firms derive their international competitiveness from CSAs rather than FSAs, and will benefit from ASEAN RSAs. Our study significantly advances the literature on international competitiveness of emerging-economy MNEs

Mid-infrared frequency comb spanning an octave based on an Er fiber laser and difference-frequency generation

We describe a coherent mid-infrared continuum source with 700 cm-1 usable bandwidth, readily tuned within 600 - 2500 cm-1 (4 - 17 \mum) and thus covering much of the infrared "fingerprint" molecular vibration region. It is based on nonlinear frequency conversion in GaSe using a compact commercial 100-fs-pulsed Er fiber laser system providing two amplified near-infrared beams, one of them broadened by a nonlinear optical fiber. The resulting collimated mid-infrared continuum beam of 1 mW quasi-cw power represents a coherent infrared frequency comb with zero carrier-envelope phase, containing about 500,000 modes that are exact multiples of the pulse repetition rate of 40 MHz. The beam's diffraction-limited performance enables long-distance spectroscopic probing as well as maximal focusability for classical and ultraresolving near-field microscopies. Applications are foreseen also in studies of transient chemical phenomena even at ultrafast pump-probe scale, and in high-resolution gas spectroscopy for e.g. breath analysis.Comment: 8 pages, 2 figures revised version, added reference

Impact of exciton delocalization on exciton-vibration interactions in organic semiconductors

Organic semiconductors exhibit properties of individual molecules and extended crystals simultaneously. The strongly bound excitons they host are typically described in the molecular limit, but excitons can delocalize over many molecules, raising the question of how important the extended crystalline nature is. Using accurate Green's function based methods for the electronic structure and non-perturbative finite difference methods for exciton-vibration coupling, we describe exciton interactions with molecular and crystal degrees of freedom concurrently. We find that the degree of exciton delocalization controls these interactions, with thermally activated crystal phonons predominantly coupling to delocalized states, and molecular quantum fluctuations predominantly coupling to localized states. Based on this picture, we quantitatively predict and interpret the temperature and pressure dependence of excitonic peaks in the acene series of organic semiconductors, which we confirm experimentally, and we develop a simple experimental protocol for probing exciton delocalization. Overall, we provide a unified picture of exciton delocalization and vibrational effects in organic semiconductors, reconciling the complementary views of finite molecular clusters and periodic molecular solids