13 research outputs found

    Identification of crystal orientation for turbine blades with anisotropy materials

    Get PDF
    A novel approach to identify the crystal orientation of turbine blades with anisotropy materials is proposed. Based on enhanced mode basis, with the main advantages of its efficiency, accuracy and general applicability, the blade vibration mode of each order is linearly constructed by several specified mode shapes, which are obtained from the considered turbine blade with specified crystal orientations correspondingly. Then, a surrogate model based on Kriging method is introduced for constructing the condensed perturbed matrix of stiffness in order to improve the efficiency even further. The constructed surrogate model allows to perform the modal analysis of turbine blades with arbitrary crystal orientations in higher efficiency, due to the fact that the elements of condensed perturbed matrix of stiffness are considered in construction of the surrogate model rather than concerning the perturbation of all the elements of the initial stiffness matrix for the blade. Genetic algorithm is finally employed to optimize the defined fitness functions in order to identify the crystal orientation angles of turbine blades. Several corresponding examples demonstrated the accuracy, efficiency and general applicability of the proposed method

    Precision Measurement of Cosmic-Ray Nitrogen and its Primary and Secondary Components with the Alpha Magnetic Spectrometer on the International Space Station

    Get PDF
    A precision measurement of the nitrogen flux with rigidity (momentum per unit charge) from 2.2 GV to 3.3 TV based on 2.2 x 10(6) events is presented. The detailed rigidity dependence of the nitrogen flux spectral index is presented for the first time. The spectral index rapidly hardens at high rigidities and becomes identical to the spectral indices of primary He, C, and O cosmic rays above similar to 700 GV. We observed that the nitrogen flux Phi(N) can be presented as the sum of its primary component Phi(P)(N) and secondary component Phi(S)(N), Phi(N) = Phi(P)(N) + Phi(S)(N), and we found Phi(N) is well described by the weighted sum of the oxygen flux Phi(O) (primary cosmic rays) and the boron flux Phi(B) (secondary cosmic rays), with Phi(P)(N) = (0.090 +/- 0.002) x Phi(O) and Phi(S)(N) = (0.62 +/- 0.02) x Phi(B) over the entire rigidity range. This corresponds to a change of the contribution of the secondary cosmic ray component in the nitrogen flux from 70% at a few GV to < 30% above 1 TV

    Observation of New Properties of Secondary Cosmic Rays Lithium, Beryllium, and Boron by the Alpha Magnetic Spectrometer on the International Space Station

    Get PDF
    We report on the observation of new properties of secondary cosmic rays Li, Be, and B measured in the rigidity (momentum per unit charge) range 1.9 GV to 3.3 TV with a total of 5.4 x 10(6) nuclei collected by AMS during the first five years of operation aboard the International Space Station. The Li and B fluxes have an identical rigidity dependence above 7 GV and all three fluxes have an identical rigidity dependence above 30 GV with the Li/Be flux ratio of 2.0 +/- 0.1. The three fluxes deviate from a single power law above 200 GV in an identical way. This behavior of secondary cosmic rays has also been observed in the AMS measurement of primary cosmic rays He, C, and O but the rigidity dependences of primary cosmic rays and of secondary cosmic rays are distinctly different. In particular, above 200 GV, the secondary cosmic rays harden more than the primary cosmic rays

    Observation of Fine Time Structures in the Cosmic Proton and Helium Fluxes with the Alpha Magnetic Spectrometer on the International Space Station

    Get PDF
    We present the precision measurement from May 2011 to May 2017 (79 Bartels rotations) of the proton fluxes at rigidities from 1 to 60 GV and the helium fluxes from 1.9 to 60 GV based on a total of 1 x 109 events collected with the Alpha Magnetic Spectrometer aboard the International Space Station. This measurement is in solar cycle 24, which has the solar maximum in April 2014. We observed that, below 40 GV, the proton flux and the helium flux show nearly identical fine structures in both time and relative amplitude. The amplitudes of the flux structures decrease with increasing rigidity and vanish above 40 GV. The amplitudes of the structures are reduced during the time period, which started one year after solar maximum, when the proton and helium fluxes steadily increase. Above similar to 3 GV the p/He flux ratio is time independent. We observed that below similar to 3 GV the ratio has a long-term decrease coinciding with the period during which the fluxes start to rise

    Observation of the Identical Rigidity Dependence of He, C, and O Cosmic Rays at High Rigidities by the Alpha Magnetic Spectrometer on the International Space Station

    Get PDF
    We report the observation of new properties of primary cosmic rays He, C, and O measured in the rigidity (momentum/charge) range 2 GV to 3 TV with 90 x 10(6) helium, 8.4 x 10(6) carbon, and 7.0 x 10(6) oxygen nuclei collected by the Alpha Magnetic Spectrometer ( AMS) during the first five years of operation. Above 60 GV, these three spectra have identical rigidity dependence. They all deviate from a single power law above 200 GV and harden in an identical way

    Antiproton Flux, Antiproton-to-Proton Flux Ratio, and Properties of Elementary Particle Fluxes in Primary Cosmic Rays Measured with the Alpha Magnetic Spectrometer on the International Space Station

    Get PDF
    A precision measurement by AMS of the antiproton flux and the antiproton-to-proton flux ratio in primary cosmic rays in the absolute rigidity range from 1 to 450 GV is presented based on 3.49 x 10(5) antiproton events and 2.42 x 10(9) proton events. The fluxes and flux ratios of charged elementary particles in cosmic rays are also presented. In the absolute rigidity range similar to 60 to similar to 500 GV, the antiproton (p) over bar, proton p, and positron e(+) fluxes are found to have nearly identical rigidity dependence and the electron e(-) flux exhibits a different rigidity dependence. Below 60 GV, the ((p) over bar /p), ((p) over bar /e(+)), and (p/e(+)) flux ratios each reaches a maximum. From similar to 60 to similar to 500 GV, the ((p) over bar /p), ((p) over bar /e(+)), and (p/e(+)) flux ratios show no rigidity dependence. These are new observations of the properties of elementary particles in the cosmos

    A novel CACOR-SVR multi-objective optimization approach and its application in aerodynamic shape optimization of high-speed train

    No full text
    A chaos ant colony optimization algorithm for continuous domain is proposed based on chaos optimization theory and ant colony optimization algorithm. The searching abilities of optimization algorithms with different coding methods are compared, and the results indicate that the proposed algorithm has better performance than genetic algorithm and particle swarm optimization algorithm. Based on the non-dominated sorting concept and niching method, a multi-objective chaos ant colony optimization algorithm is also constructed and numerical results show that the improved algorithm performs well at solving multi-objective optimization problems. An optimal support vector regression model based on radial basis kernel function is developed for the small sample size and nonlinear characteristics of streamlined head optimization. On the basis of the above work, a multi-objective optimization design for the aerodynamic head shape of high-speed train is developed using a modified vehicle modeling function parametric approach. The optimization results demonstrate that the new optimization design method has exceptional searching abilities and high prediction accuracy. After optimization, the aerodynamic drag of the simplified train with three carriages is reduced by 10.52% and the aerodynamic lift of the tail car is reduced by 35.70%. The optimization approach proposed in the present paper is simple yet efficient and sheds light on the engineering design of aerodynamic shape of high-speed trains
    corecore