43 research outputs found
Positron Annihilation Lifetime Study of High and Low Free Volume Glassy Polymers:Â Effects of Free Volume Sizes on the Permeability and Permselectivity
Impact of the Polymer Backbone Structure on the Separation Properties of New Stationary Phases Based on Tricyclononenes
The main purpose of this paper is to compare the chromatographic properties of capillary columns prepared with polymers with different backbone structures and to demonstrate the possibility of polymer differentiation via inverse gas chromatography. With the use of addition and metathesis types of polymerization of tricyclononenes, two new stationary phases were prepared. The metathesis polymer contained double bonds in the polymeric backbone while the backbone of the addition polymer was fully saturated and relatively mobile. A comparison of the separation and adsorption properties of new phases with conventional gas chromatography (GC) stationary phases clearly indicated their non-polar characteristics. However, the difference in the polymer structure appeared to have very little effect on the stationary phase separation properties, so other parameters were used for polymer characterization. The thermodynamic parameters of the sorption of alkanes and aromatic compounds in both polymeric stationary phases were also very similar; however, the entropy of sorption for hydrocarbons with seven or more carbon atoms was different for the two polymers. An evaluation of the specific surface energy of the stationary phases also allowed us to discriminate the two stationary phases
Features of the Gas-Permeable Crystalline Phase of Poly-2,6-dimethylphenylene Oxide
Poly-2,6-dimethylphenylene oxide (PPO) film samples with varying degrees of crystallinity (from 0 to 69%) were obtained by means of different techniques. The films were studied by various physicochemical methods (Fourier-transform infrared spectroscopy, positron annihilation lifetime spectroscopy, X-ray diffraction, and 1H nuclear magnetic resonance relaxation). Solubility coefficients of gases in the PPO samples were measured via sorption isotherms of gases by volumetric technique with chromatographic detection. The apparent activation energy of permeation and the activation energy of diffusion of all gases were estimated based on temperature dependences of gas permeability and diffusivity for amorphous and semi-crystalline PPO in the range of 20–50 °C. The peculiarities of free volume, density, and thermal properties of gas transport confirm the nanoporosity of the gas-permeable crystalline phase of PPO. So, the PPO can be included in the group of organic molecular sieves
Chemical structure-transport behavior relationship for polyimides and copolyimides based on rigid and flexible dianhydrides
Gas Permeation and Hemocompatibility of Novel Perfluorinated Polymers for Blood Oxygenation
Synthesis and Gas-Separation Properties of New Silacyclopentane-Containing Polynorbornenes
Hydrophobic–Hydrophilic Properties and Characterization of PIM-1 Films Treated by Elemental Fluorine in Liquid Perfluorodecalin
A direct fluorination technique was applied for the surface treatment of PIM-1 films in a liquid phase (perfluorodecalin). The fluorinated samples were analyzed by various instrumental techniques. ATR-IR spectroscopy showed that the fluorination predominantly takes place in methylene- and methyl-groups. Cyano-groups, aromatic hydrogens and the aromatic structure of the PIM-1 repeat unit were shown to be relatively stable at the fluorination conditions. XPS confirmed that the concentration of fluorine, as well as oxygen, in the near surface layer (~1 nm) increases with fluorination time. C1s and O1s surface spectra of the fluorinated PIM-1 samples indicated an appearance of newly-formed C-F and C-O functional groups. Scanning electron microscopy and X-ray energy-dispersive spectroscopy of the fluorinated PIM-1 samples showed an increase of the fluorine concentration at the surface (~0.1–1 μm) with the treatment duration. Analysis of the slices of the PIM-1 films demonstrated a decline of the fluorine content within several microns of the film depth. The decline increased with the fluorination time. A model of fluorine concentration dependence on the film depth and treatment duration was suggested. A change in the specific free surface energy as a result of PIM-1 fluorination was revealed. The fluorination time was shown to affect the surface energy (γSV), providing its shift from a low value (25 mJ∙m−2), corresponding to tetrafluoroethylene, up to a relatively high value, corresponding to a hydrophilic surface