Photon recycling in Fabry-Perot micro-cavities based on Si3_3N4_4 waveguides

We present a numerical analysis and preliminary experimental results on one-dimensional Fabry-Perot micro-cavities in Si$_3$N$_4$ waveguides. The Fabry-Perot micro-cavities are formed by two distributed Bragg reflectors separated by a straight portion of waveguide. The Bragg reflectors are composed by a few air slits produced within the Si$_3$N$_4$ waveguides. In order to increase the quality factor of the micro-cavities, we have minimized, with a multiparametric optimization tool, the insertion loss of the reflectors by varying the length of their first periods (those facing the cavity). To explain the simulation results the coupling of the fundamental waveguide mode with radiative modes in the Fabry-Perot micro-cavities is needed. This effect is described as a recycling of radiative modes in the waveguide. To support the modelling, preliminary experimental results of micro-cavities in Si$_3$N$_4$ waveguides realized with Focused Ion Beam technique are reported.Comment: 5 pages, 5 figure

Biovolume determination of phytoplankton guilds in transitional water ecosystems of Mediterranean Ecoregion

1 - Conceptually, morphometric measurements of phytoplankton guilds seem to have major advantages as descriptors of the ecological status of transitional water ecosystems (TW) with respect to classical taxonomic descriptors. However, at present, standardized or common methodologies for the use of morphometric descriptors do not exist. 2 - This paper aims to provide a starting point for the activation of standardized methods for the determination of morphometric descriptors of phytoplankton as a quality element in TW in accordance with the new directive of WFD 2000/60/EU. 3 - Phytoplankton biovolume is one of the most studied morphometric descriptors. It can be estimated by associating the algae with similar geometric forms and determining the volume of these by measuring the linear dimensions required for its calculation under the microscope. However, the lack of a standardized set of geometric forms and equations for calculating biovolume causes difficulties and produces data that are not comparable. 4 - A set of geometric models is suggested here for calculating the cell biovolumes of 201 phytoplankton genera found in transitional water ecosystems of Mediterranean Ecoregion. The equations were designed to minimize the effort of microscopic measurements. The main methodological problems, and the similarities and differences between our own and previously published proposals are discussed

Plasmonic lenses for tunable ultrafast electron emitters at the nanoscale

Simultaneous spatiotemporal confinement of energetic electron pulses to femtosecond and nanometer scales is a topic of great interest in the scientific community, given the potential impact of such developments across a wide spectrum of scientific and industrial applications. For example, in ultrafast electron scattering, nanoscale probes would enable accurate maps of structural dynamics in materials with nanoscale heterogeneity, thereby leading to an understanding of the role of boundaries and defects on macroscopic properties. On the other hand, advances in this field are mostly limited by the brightness and size of the electron source. We present the design, fabrication, and optical characterization of bullseye plasmonic lenses for next-generation ultrafast electron sources. Using electromagnetic simulations, we examine how the interplay between light-plasmon coupling, plasmon propagation, dispersion, and resonance governs the properties of the photoemitted electron pulse. We also illustrate how the pulse duration and strength can be tuned by geometric design and predict that sub-10-fs pulses with nanoscale diameter can be achieved. We then fabricate lenses in gold films and characterize their plasmonic properties using cathodoluminescence spectromicroscopy, demonstrating suitable plasmonic behavior for ultrafast nanoscale photoemission

Detection of low energy single ion impacts in micron scale transistors at room temperature

We report the detection of single ion impacts through monitoring of changes in the source-drain currents of field effect transistors (FET) at room temperature. Implant apertures are formed in the interlayer dielectrics and gate electrodes of planar, micro-scale FETs by electron beam assisted etching. FET currents increase due to the generation of positively charged defects in gate oxides when ions (121Sb12+, 14+, Xe6+; 50 to 70 keV) impinge into channel regions. Implant damage is repaired by rapid thermal annealing, enabling iterative cycles of device doping and electrical characterization for development of single atom devices and studies of dopant fluctuation effects

Balancing ion parameters and fluorocarbon chemical reactants for SiO2 pattern transfer control using fluorocarbon-based atomic layer etching

In manufacturing, etch profiles play a significant role in device patterning. Here, the authors present a study of the evolution of etch profiles of nanopatterned silicon oxide using a chromium hard mask and a CHF3/Ar atomic layer etching in a conventional inductively coupled plasma tool. The authors show the effect of substrate electrode temperature, chamber pressure, and electrode forward power on the etch profile evolution of nanopatterned silicon oxide. Chamber pressure has an especially significant role, with lower pressure leading to lower etch rates and higher pattern fidelity. The authors also find that at higher electrode forward power, the physical component of etching increases and more anisotropic etching is achieved. By carefully tuning the process parameters, the authors are able to find the best conditions to achieve aspect-ratio independent etching and high fidelity patterning, with an average sidewall angle of 87° ± 1.5° and undercut values as low as 3.7 ± 0.5% for five trench sizes ranging from 150 to 30 nm. Furthermore, they provide some guidelines to understand the impact of plasma parameters on plasma ion distribution and thus on the atomic layer etching process

Atomic layer etching of SiO2 with Ar and CHF 3 plasmas: A self-limiting process for aspect ratio independent etching

With ever increasing demands on device patterning to achieve smaller critical dimensions, the need for precise, controllable atomic layer etching (ALE) is steadily increasing. In this work, a cyclical fluorocarbon/argon plasma is successfully used for patterning silicon oxide by ALE in a conventional inductively coupled plasma tool. The impact of plasma parameters and substrate electrode temperature on the etch performance is established. We achieve the self-limiting behavior of the etch process by modulating the substrate temperature. We find that at an electrode temperature of −10°C, etching stops after complete removal of the modified surface layer as the residual fluorine from the reactor chamber is minimized. Lastly, we demonstrate the ability to achieve independent etching, which establishes the potential of the developed cyclic ALE process for small scale device patterning

The many pros and the few cons of noninvasive ventilation in ordinary wards

n/

Chemical Raman Enhancement of Organic Adsorbates on Metal Surfaces

Using a combination of first-principles theory and experiments, we provide a quantitative explanation for chemical contributions to surface-enhanced Raman spectroscopy for a well-studied organic molecule, benzene thiol, chemisorbed on planar Au(111) surfaces. With density functional theory calculations of the static Raman tensor, we demonstrate and quantify a strong mode-dependent modification of benzene thiol Raman spectra by Au substrates. Raman active modes with the largest enhancements result from stronger contributions from Au to their electron-vibron coupling, as quantified through a deformation potential, a well-defined property of each vibrational mode. A straightforward and general analysis is introduced that allows extraction of chemical enhancement from experiments for specific vibrational modes; measured values are in excellent agreement with our calculations.Comment: 5 pages, 4 figures and Supplementary material included as ancillary fil

Ethical issues associated with in-hospital emergency from the medical emergency team's perspective: a national survey

Medical Emergency Teams (METs) are frequently involved in ethical issues associated to in-hospital emergencies, like decisions about end-of-life care and intensive care unit (ICU) admission. MET involvement offers both advantages and disadvantages, especially when an immediate decision must be made. We performed a survey among Italian intensivists/anesthesiologists evaluating MET's perspective on the most relevant ethical aspects faced in daily practice

Boccaccio: gli antichi e i moderni

I saggi raccolti nel volume intendono sottoporre a un nuovo e approfondito esame un significativo ventaglio di temi e di aspetti relativi alla vitale presenza di autori \u201cantichi\u201d e \u201cmoderni\u201d nell\u2019opera di Boccaccio nonch\ue9 all\u2019eccezionale ricezione secolare della sua produzione letteraria: da Omero alla riflessione sulla poesia e sui poeti, da questioni metodologiche e tematiche sull\u2019intertestualit\ue0 alla centralit\ue0 e risonanza della parola, in forma diretta e nella scrittura, dalla fortuna ai modi di trasformazione e riappropriazione in altre letterature e arti fino all\u2019epoca contemporanea