Sunspot waves and flare energy release

We address a possibility of the flare process initiation and further maintenance of its energy release due to a transformation of sunspot longitudinal waves into transverse magnetic loop oscillations with initiation of reconnection. This leads to heating maintaining after the energy release peak and formation of a flat stage on the X-ray profile. We applied the time-distance plots and pixel wavelet filtration (PWF) methods to obtain spatio-temporal distribution of wave power variations in SDO/AIA data. To find magnetic waveguides, we used magnetic field extrapolation of SDO/HMI magnetograms. The propagation velocity of wave fronts was measured from their spatial locations at specific times. In correlation curves of the 17 GHz (NoRH) radio emission we found a monotonous energy amplification of 3-min waves in the sunspot umbra before the 2012 June 7 flare. This dynamics agrees with an increase in the wave-train length in coronal loops (SDO/AIA, 171 {\AA}) reaching the maximum 30 minutes prior to the flare onset. A peculiarity of this flare time profile in soft X-rays (RHESSI, 3-25 keV) is maintaining the constant level of the flare emission for 10 minutes after the short impulse phase, which indicates at the energy release continuation. Throughout this time, we found 30-sec period transverse oscillations of the flare loop in the radio-frequency range (NoRH, 17 GHz). This periodicity is apparently related to the transformation of propagating longitudinal 3-min waves from the sunspot into the loop transverse oscillations. The magnetic field extrapolation showed the existence of the magnetic waveguide (loop) connecting the sunspot with the energy release region. A flare loop heating can be caused by the interaction (reconnections) of this transversally oscillating waveguide with the underlying twisted loops.Comment: 7 pages, 9 figure

Study of flare energy release using events with numerous type III-like bursts in microwaves

The analysis of narrowband drifting of type III-like structures in radio bursts dynamic spectra allows to obtain unique information about primary energy release mechanisms in solar flares. The SSRT spatially resolved images and a high spectral and temporal resolution allow direct determination not only the positions of its sources but also the exciter velocities along the flare loop. Practically, such measurements are possible during some special time intervals when the SSRT (about 5.7 GHz) is observing the flare region in two high-order fringes; thus, two 1D scans are recorded simultaneously at two frequency bands. The analysis of type III-like bursts recorded during the flare 14 Apr 2002 is presented. Using-muliwavelength radio observations recorded by SSRT, SBRS, NoRP, RSTN we study an event with series of several tens of drifting microwave pulses with drift rates in the range from -7 to 13 GHz/s. The sources of the fast-drifting bursts were located near the top of the flare loop in a volume of a few Mm in size. The slow drift of the exciters along the flare loop suggests a high pitch-anisotropy of the emitting electrons.Comment: 16 pages, 6 figures, Solar Physics, in press, 201

Diagnostics of electron beam properties from the simultaneous hard X-ray and microwave emission in the 10 March 2001 flare

Simultaneous simulation of HXR and MW emission with the same populations of electrons is still a great challenge for interpretation of observations in real events. In this paper we apply the FP kinetic model of precipitation of electron beam with energy range from 12 keV to 1.2 MeV to the interpretation of X-ray and microwave emissions observed in the flare of 10 March 2001. Methods. The theoretical HXR and MW emissions were calculated by using the distribution functions of electron beams found by solving time-dependent Fokker-Planck approach in a converging magnetic field (Zharkova at al., 2010; Kuznetsov and Zharkova, 2010) for anisotropic scattering of beam electrons on the ambient particles in Coloumb collisions and Ohmic losses. The simultaneous observed HXR photon spectra and frequency distribution of MW emission and polarization were fit by those simulated from FP models which include the effects of electric field induced by beam electrons and precipitation into a converging magnetic loop. Magnetic field strengths in the footpoints on the photosphere were updated with newly calibrated SOHO/MDI data. The observed HXR energy spectrum above 10 keV is shown to be a double power law which was fit precisely by the photon HXR spectrum simulated for the model including the self-induced electric field but without magnetic convergence. The MW emission simulated for different models of electron precipitation revealed a better fit to the observed distribution at higher frequencies for the models combining collisions and electric field effects with a moderate magnetic field convergence of 2. The MW simulations were able to reproduce closely the main features of the MW emission observed at higher frequencies.Comment: 17 pages, 10 figures in press; A&A 201

Radioheliograph observations of microwave bursts with zebra structures

The so-called zebra structures in radio dynamic spectra, specifically their frequencies and frequency drifts of emission stripes, contain information on the plasma parameters in the coronal part of flare loops. This paper presents observations of zebra structures in a microwave range. Dynamic spectra were recorded by Chinese spectro-polarimeters in the frequency band close to the working frequencies of the Siberian Solar Radio Telescope. The emission sources are localized in the flare regions, and we are able to estimate the plasma parameters in the generation sites using X-ray data. The interpretation of the zebra structures in terms of the existing theories is discussed. The conclusion has been arrived that the preferred generation mechanism of zebra structures in the microwave range is the conversion of plasma waves to electromagnetic emission on the double plasma resonance surfaces distributed across a flare loop.Comment: 18 pages, 7 figure

Broadband microwave burst produced by electron beams

Theoretical and experimental study of fast electron beams attracts a lot of attention in the astrophysics and laboratory. In the case of solar flares the problem of reliable beam detection and diagnostics is of exceptional importance. This paper explores the fact that the electron beams moving oblique to the magnetic field or along the field with some angular scatter around the beam propagation direction can generate microwave continuum bursts via gyrosynchrotron mechanism. The characteristics of the microwave bursts produced by beams differ from those in case of isotropic or loss-cone distributions, which suggests a new tool for quantitative diagnostics of the beams in the solar corona. To demonstrate the potentiality of this tool, we analyze here a radio burst occurred during an impulsive flare 1B/M6.7 on 10 March 2001 (AR 9368, N27W42). Based on detailed analysis of the spectral, temporal, and spatial relationships, we obtained firm evidence that the microwave continuum burst is produced by electron beams. For the first time we developed and applied a new forward fitting algorithm based on exact gyrosynchrotron formulae and employing both the total power and polarization measurements to solve the inverse problem of the beam diagnostics. We found that the burst is generated by a oblique beam in a region of reasonably strong magnetic field ($\sim 200-300$ G) and the burst is observed at a quasi-transverse viewing angle. We found that the life time of the emitting electrons in the radio source is relatively short, $\tau_l \approx 0.5$ s, consistent with a single reflection of the electrons from a magnetic mirror at the foot point with the stronger magnetic field. We discuss the implications of these findings for the electron acceleration in flares and for beam diagnostics.Comment: Astrophysical Journal, accepted: 26 pages, 8 figure

The multifrequency Siberian Radioheliograph

The 10-antenna prototype of the multifrequency Siberian radioheliograph is described. The prototype consists of four parts: antennas with broadband front-ends, analog back-ends, digital receivers and a correlator. The prototype antennas are mounted on the outermost stations of the Siberian Solar Radio Telescope (SSRT) array. A signal from each antenna is transmitted to a workroom by an analog fiber optical link, laid in an underground tunnel. After mixing, all signals are digitized and processed by digital receivers before the data are transmitted to the correlator. The digital receivers and the correlator are accessible by the LAN. The frequency range of the prototype is from 4 to 8 GHz. Currently the frequency switching observing mode is used. The prototype data include both circular polarizations at a number of frequencies given by a list. This prototype is the first stage of the multifrequency Siberian radioheliograph development. It is assumed that the radioheliograph will consist of 96 antennas and will occupy stations of the West-East-South subarray of the SSRT. The radioheliograph will be fully constructed in autumn of 2012. We plan to reach the brightness temperature sensitivity about 100 K for the snapshot image, a spatial resolution up to 13 arcseconds at 8 GHz and polarization measurement accuracy about a few percent. First results with the 10-antenna prototype are presented of observations of solar microwave bursts. The prototype abilities to estimate source size and locations at different frequencies are discussed