Nasal airflow and odorant transport modeling in patients with chronic rhinosimusitis

Poster presentation at Association for Chemoreception Sciences (ACHEMS) in Sarasota Florida April 25-29, 2007. Introduction: Our on-going clinical project aims to quantify the conductive mechanism contributing toolfactory loss in chronic rhinosinusitis (CRS) patients, in addition to other inflammatory causes(see Yee, et al, 200 and Feng, et al, 203). CRS, a common disease affecting 32 millionAmericans annually, is reportedly associated with at least 15% of all olfactory losses. Airwayconstriction as a result of inflammation or the presence of polyps may limit odor access to thereceptor sites and lead to olfactory dysfunction. As yet, the functional impact of various nasalobstructions as sequelae to CRS and their treatment outcomes have not been successfullyindexed by any existing clinical tools, such as acoustic rhinometry, or rhinomanometry.Computational fluid dynamics (CFD) techniques have shown great promises to simulate nasalairflow and predict odorant delivery rates to the olfactory epithelium based on CT scans. In thisreport, we provide additional support for the hypothesis that the CFD calculation is a betterpredictor of olfactory sensitivity among CRS patients than are conventional methods

Assessment of smoking status based on cotinine levels in nasal lavage fluid

Cotinine is a principal metabolite of nicotine with a substantially longer half-life, and cotinine levels in saliva, urine or serum are widely used to validate self-reported smoking status. The nasal cavity and olfactory system are directly exposed to tobacco smoke in smokers and in non-smokers who live with or work around smokers. However, despite the potential for a direct impact of tobacco smoke on the nasal epithelium and olfactory neurons, no prior studies have assessed cotinine levels in nasal mucus. We sought to determine whether cotinine levels in nasal lavage fluid (NLF) would provide a reasonable estimate of smoke exposure. We assayed cotinine using a competitive immunoassay in NLF from 23 smokers, 10 non-smokers exposed to tobacco smoke (ETS) and 60 non-smokers who did not report smoke exposure. NLF cotinine levels were significantly higher in smokers than in non-smokers, regardless of their exposure to ambient tobacco smoke. Cotinine levels in this small group of exposed non-smokers were not significantly different than those of non-exposed non-smokers. A cutoff of 1 ng/ml provided a sensitivity of 91% and a specificity of 99% for smoking status in this sample. Data were consistent with self-reported smoking status, and a cutoff of 1.0 ng/ml NLF cotinine may be used to classify smoking status. While saliva is the most easily obtained body fluid, NLF can be used to provide an objective and precise indication of smoking status and more directly reflects smoke exposure in the nasal and olfactory mucosa

Evaluating the activity and stability of perovskite LaMO3-based Pt catalysts in the aqueous phase reforming of glycerol

The aqueous phase reforming of glycerol, to hydrogen, alkanes and liquid phase dehydration/dehydrogenation products, was studied over a series of 1 wt% Pt/LaMO3 (where M = Al, Cr, Mn, Fe, Co, Ni) catalysts and compared to a standard 1 wt% Pt/γ-Al2O3 catalyst. The sol–gel combustion synthesis of lanthanum-based perovskites LaMO3 produced pure phase perovskites with surface areas of 8–18 m2g−1. Glycerol conversions were higher than the Pt/γ-Al2O3 (10%) for several perovskite supported catalysts, with the highest being for Pt/LaNiO3 (19%). Perovskite-based catalysts showed reduced alkane formation and significantly increased lactic acid formation compared to the standard catalyst. However, most of the perovskite materials undergo phase separation to LaCO3OH and respective M site oxides with Pt particle migration. The exception being the LaCrO3 support which was found to remain structurally stable. Catalytic performance remained stable over several cycles, for catalysts M = Al, Cr and Ni, despite phase separation of some of these materials. Materials where M site leaching into solution was observed (M = Mn and Co), were found to be catalytically unstable, which was hypothesised to be due to significant loss in support surface area and uncontrolled migration of Pt to the remaining support surface. In the case of Pt/LaNiO3 alloying between the exsoluted Ni and Pt was observed post reaction

Operando XAFS investigation on the effect of ash deposition on three-way catalyst used in Gasoline Particulate Filters and the effect of the manufacturing process on the catalytic activity

Platinum group metals (PGM) such as palladium and rhodium based catalysts are currently being implemented in Gasoline Particulate Filter (GPF) autoexhaust aftertreatment systems. However, little is known about how the trapped particulate matter, such as the incombustible ash, interacts with the catalyst and so may affect its performance. This operando study follows the evolution of the Pd found in two different model GPF systems: one containing ash components extracted from a GPF and another from a catalyst washcoat prior to adhesion onto the GPF. We show that the catalytic activity of the two systems vary when compared with a 0 g ash containing GPF. Compared to the 0 g ash sample the 20 g ash containing sample had a higher CO light off temperature, in addition, an oscillation profile for CO, CO2 and O2 was observed, which is speculated to be a combination of CO oxidation, C deposition via a Boudouard Reaction and further partial oxidation of the deposited species to CO. During the ageing procedure the washcoat sample reduces NO at a lower temperature than the 0 g ash sample. However, post ageing the 0 g ash sample recovers and both samples reduce NO at 310 circleC. In comparison, the 20 g ash GPF sample maintains a higher NO reduction temperature of 410 circleC post ageing, implying that the combination of high temperature ageing and presence of ash has an irreversible negative effect on catalyst performance