Fire performance of basalt fibre composites under tensile loading

In this paper, the fire structural resistance of a basalt fibre composite is determined experimentally and analytically. The basalt fibre composite is compared against an equivalent laminate reinforced with E-glass fibres. The fire structural survivability of the basalt fibre composite was inferior to the glass fibre laminate when exposed to the same radiant heat flux. The materials were weakened by thermal softening and decomposition of the polymer matrix and tensile softening of the fibre reinforcement, and these events occurred at similar temperature ranges and property loss rates. It was determined that the inferior fire resistance of the basalt fibre composite is due mainly to the material's lower emissivity which causes higher temperatures within the material for the same radiant heat flux

Rubber Impact on 3D Textile Composites

A low velocity impact study of aircraft tire rubber on 3D textile-reinforced composite plates was performed experimentally and numerically. In contrast to regular unidirectional composite laminates, no delaminations occur in such a 3D textile composite. Yarn decohesions, matrix cracks and yarn ruptures have been identified as the major damage mechanisms under impact load. An increase in the number of 3D warp yarns is proposed to improve the impact damage resistance. The characteristic of a rubber impact is the high amount of elastic energy stored in the impactor during impact, which was more than 90% of the initial kinetic energy. This large geometrical deformation of the rubber during impact leads to a less localised loading of the target structure and poses great challenges for the numerical modelling. A hyperelastic Mooney-Rivlin constitutive law was used in Abaqus/Explicit based on a step-by-step validation with static rubber compression tests and low velocity impact tests on aluminium plates. Simulation models of the textile weave were developed on the meso- and macro-scale. The final correlation between impact simulation results on 3D textile-reinforced composite plates and impact test data was promising, highlighting the potential of such numerical simulation tools

Failure analysis using X-ray computed tomography of composite sandwich panels subjected to full-scale blast loading

The tailorable mechanical properties and high strength-to-weight ratios of composite sandwich panels make them of interest to the commercial marine and naval sector, however, further investigation into their blast resilience is required. The experiments performed in this study aimed to identify whether alterations to the composite skins or core of a sandwich panel can yield improved blast resilience both in air and underwater. Underwater blast loads using 1.28 kg TNT equivalent charge at a stand-off distance of 1 m were performed on four different composite sandwich panels. Results revealed that implementing a stepwise graded density foam core, with increasing density away from the blast, reduces the deflection of the panel and damage sustained. Furthermore, the skin material affects the extent of panel deflection and damage, the lower strain to failure of carbon-fibre reinforced polymer (CFRP) skins reduces deflection but increases skin debonding. A further two panels were subjected to a 100 kg TNT air blast loading at a 15 m stand-off to compare the effect of a graded density core and the results support the underwater blast results. Future modelling of these experiments will aid the design process and should aim to include material damage mechanisms to identify the most suitable skins

A review of composite product data interoperability and product life-cycle management challenges in the composites industry

A review of composite product data interoperability and product life-cycle management challenges is presented, which addresses “Product Life-cycle Management”, developments in materials. The urgent need for this is illustrated by the life-cycle management issues faced in modern military aircraft, where in-service failure of composite parts is a problem, not just in terms of engineering understanding, but also in terms of the process for managing and maintaining the fleet. A demonstration of the use of ISO 10303-235 for a range of through-life composite product data is reported. The standardization of the digital representation of data can help businesses to automate data processing. With the development of new materials, the requirements for data information models for materials properties are evolving, and standardization drives transparency, improves the efficiency of data analysis, and enhances data accuracy. Current developments in Information Technology, such as big data analytics methodologies, have the potential to be highly transformative

State-of-the-art review on FRP sandwich systems for lightweight civil infrastructure

Fiber reinforced polymer (FRP) sandwich systems as primary load-bearing elements are relatively new concepts in lightweight civil infrastructure. These systems offer a combination of light weight, high strength, thermal insulation for some types, and service-life benefits. Recent developments and applications have demonstrated that these composite systems have emerged as a cost-effective alternative, especially when each material component is appropriately designed. Still, some issues and challenges need to be addressed if FRP systems are to gain widespread use in civil infrastructure. This paper provides an overview of the state-of-the-art research, development, and applications of FRP sandwich systems. It also identifies the challenges and future opportunities for the broad use of these advanced systems in civil engineering and construction