Adding value to cull cow beef

End of project reportThis project addressed the prospects of increasing the value of cull cow beef and examined the potential of a number of different management and dietary strategies. In Ireland, the national cow herd contributes 350,000 animals to total beef production annually, which represents 22% of all cattle slaughtered (DAF, 2007). A dominant feature of beef production in Ireland is the disposal of cows from the dairy and beef industries, the time of year at which culling occurs influences the number of cows available for slaughter. Suitability of a cow for slaughter is generally not a consideration for dairy or beef farmers

Prediction of cull cow carcass characteristics from live weight and body condition score measured pre slaughter

peer-reviewedA study was conducted to provide information on the degree of carcass finish of Irish cull cows and to investigate the usefulness of live animal measurements for the prediction beef breeds (albeit with a moderate R2 value compared to the carcass weight prediction) using objective, non-intrusive and easily measured live animal measurements, should be of benefit to farmers finishing cull cows in Ireland. of cull cow carcass characteristics. Live weight (LW) and body condition score (BCS) were recorded on cows entering an Irish commercial slaughter facility between September and November, 2005. Data pertaining to sire breed, age and carcass characteristics were collected and subsequently collated for each cow. For analysis, cows (n = 2163) were subdivided into three breed categories: dairy breed sired by Holstein/ Friesian (FR), sired by early-maturing beef breeds (EM) and sired by late-maturing beef breeds (LM). The proportion of cows slaughtered at the desired (TARGET) carcass standard (cold carcass weight ≥ 272 kg, carcass conformation class ≥ P+ and carcass fat class ≥ 3) was low (on average 0.30), but did differ (P < 0.001) between the dairy and beef breed categories (0.22, 0.47 and 0.53 for FR, EM and LM categories, respectively). Regression procedures were used to develop equations to predict cold carcass weight, carcass conformation score, carcass fat score and proportion in the TARGET category from LW and BCS. Equations predicting cold carcass weight had high R2 values for all breed categories (0.81, 0.85 and 0.79 for the FR, EM and LM, respectively). Equations predicting carcass fatness had moderate R2 values for the beef breed categories (0.65 and 0.59 for the EM and LM, respectively). Equations predicting carcass conformation and the TARGET category yielded lower R2 values. The successful prediction of carcass weight for all breed categories and of carcass fatness for th

Capabilities for Transdisciplinary Research. An Evaluation Framework and Lessons from the ESRC Nexus Network +

Research framed to address global, grand and societal challenges has brought fresh impetus to calls by funding agencies for transdisciplinary research. Yet the urgency of such calls is not matched by sufficient knowledge of how to foster and maintain the capabilities to do transdisciplinary work. Significant gaps exist in how to cultivate and maintain transdisciplinary methods, practices and the underlying capabilities required to support them. This paper employs a capability approach to construct a realist evaluative framework with which to assess such capabilities. The framework is operationalised through a novel three-stage mixed method procedure which seeks to evaluate transdisciplinary capabilities as they are valued and experienced by researchers themselves. The procedure is tested on a portfolio of five ‘pump-priming’ projects funded by the ESRC Nexus Network +. The paper reports a set of transdisciplinary capabilities valued by nexus research participants and found to varying degrees within each of the research projects. We find that pump-priming investments are sites of research capability development in three ways; through convening cognitive capabilities; cultivating transgressive capabilities; and maintaining backstage capabilities over durations that extend beyond the beginning and end of individual projects. Furthermore, for researchers, it is the transgressive quality of these capabilities that is most salient. Directing greater attention to these different modes of capability development in pump-priming research programmes may be useful in growing and steering research system capacity towards contemporary and future societal needs

Older adults and the unique role of the radiation therapist: Future directions for improving geriatric oncology training and education.

There is widespread recognition that the provision of high quality, appropriate and equitable care to older adults with cancer is a growing challenge in oncology practice. Radiation therapy (RT) is an effective and localised treatment that represents an attractive curative or palliative option for many older adults, and radiation therapists (RTT) play an important role in the delivery, support and quality of care for people during RT. The need to develop an evidence-based, global approach to improving all radiation oncology (RO) professionals' knowledge and clinical practice in geriatric oncology (GO) has been previously identified. This article specifically focusses on the status quo of GO clinical practice and education for RTT worldwide. We explore the unique clinical role that RTT play in the management of older adults with cancer and define multiple clinical care points in which RTT could potentially participate in geriatric screening, geriatric assessment and intervention to optimise the care of older adults, with a focus on dementia. Directions for future efforts to improve the knowledge and clinical skills of RTT in caring for older adults are discussed

c-axis Josephson Tunnelling in Twinned and Untwinned YBCO-Pb Junctions

Within a microscopic two band model of planes and chains with a pairing potential in the planes and off diagonal pairing between planes and chains we find that the chains make the largest contribution to the Josephson tunnelling current and that through them the d-wave part of the gap contributes to the current. This is contrary to the usual assumption that for a d-wave tetragonal superconductor the c-axis Josephson current for incoherent tunnelling into an s-wave superconductor is zero while that of a d-wave orthorhombic superconductor with a small s-wave component to its gap it is small but non-zero. Nevertheless it has been argued that the effect of twins in YBCO would lead to cancellation between pairs of twins and so the observation of a current in c-axis YBCO-Pb experiments is evidence against a d-wave type order parameter. We argue that both theory and experiment give evidence that the two twin orientations are not necessarily equally abundant and that the ratio of tunnelling currents in twinned and untwinned materials should be related to the relative abundance of the two twin orientations.Comment: 6 pages, RevTeX 3.0, 15 PostScript figur

Jet heat transfer in the vicinity of a rotating grinding wheel

Abstract: Impinging jets are known as a method of achieving high convective heat transfer coefficients. One potential application of impinging jet heat transfer is the air jet cooling of a grinding process. A grinding process generates heat that must be dissipated to avoid thermal damage. To date, this has been achieved using flood cooling with a traditional coolant such as an oil and water mixture; however, using a jet of air in its place has obvious environmental and economic benefits. For a range of grinding test configurations, results are presented of the convective heat transfer from the workpiece, along the notional plane of cut, and of the air flow velocity in a two-dimensional plane perpendicular to the workpiece. It has been shown that a boundary layer that develops around the rotating grinding wheel has the effect of displacing a peak in the distribution of the local heat transfer coefficient from the notional arc of cut. To effectively cool the grinding zone, therefore, it is necessary to penetrate this boundary layer and this can only be achieved when the jet velocity is substantially greater than the tangential velocity of the wheel

Effects of Capping on the (Ga,Mn)As Magnetic Depth Profile

Annealing can increase the Curie temperature and net magnetization in uncapped (Ga,Mn)As films, effects that are suppressed when the films are capped with GaAs. Previous polarized neutron reflectometry (PNR) studies of uncapped (Ga,Mn)As revealed a pronounced magnetization gradient that was reduced after annealing. We have extended this study to (Ga,Mn)As capped with GaAs. We observe no increase in Curie temperature or net magnetization upon annealing. Furthermore, PNR measurements indicate that annealing produces minimal differences in the depth-dependent magnetization, as both as-grown and annealed films feature a significant magnetization gradient. These results suggest that the GaAs cap inhibits redistribution of interstitial Mn impurities during annealing.Comment: 12 pages, 3 figures, submitted to Applied Physics Letter

Experimental evaluation of a membrane distillation system for integration with concentrated photovoltaic/thermal (CPV/T) energy

AbstractResults are presented for a concentrated solar photovoltaic and thermal powered membrane distillation (MD) system for seawater desalination. Solar intensity data was input into a mathematical model for the solar energy system and out let temperature from the energy system was calculated. The MD module was tested for a fluctuating inlet temperature, as would be produced from a solar energy source. A maximum distillate flux of 3.4 l/m2h was recorded, though this did not correspond to the highest inlet temperature. An observed delay in the modules response to the fluctuations in temperature was due to the thermal mass of the MD unit. The conductivity of the distillate was measured to assess the effects of transient operation on the quality of the distillate produced. It was determined that although the quantity and quality of the distillate varied with the fluctuations in power supplied to the module, the effects were not significant enough to rule out the integration of the MD module with solar energy