99 research outputs found

    Effects of Surfactants on the Thermal and Fire Properties of Poly(Methyl Methacrylate)/Clay Nanocomposites

    Get PDF
    Nanocomposites of poly(methyl methacrylate) (PMMA) with layered silicates and with polyhedral oligosilsesquioxanes (POSS) were prepared by bulk polymerization. The thermal and fire stabilities of the various organically-modified clay and POSS nanocomposites were evaluated using both thermogravimetric analysis (TGA) and cone calorimetry. Thermogravimetric analysis is not a good criteria for evaluating nanocomposite formation but cone calorimetry can be. For montmorillonite systems, when more than 4% clay is present, the expected reduction in peak heat release rate is observed. For hectorite, a minimum of 6% clay concentration is required to achieve the same reduction in peak heat release rate. POSS has the potential to reduce the peak heat release rate but one must be careful in selecting the POSS material to be evaluated

    Fire Retardancy of Vinyl Ester Nanocomposites: Synergy with Phosphorus-Based Fire Retardants

    Get PDF
    Vinyl ester (PVE) nanocomposites were prepared using both clay and polyhedral oligosilsesquioxanes (POSS) as the nano-dimensional material. From cone calorimetric data, it was shown that both POSS and clay affect the flammability of the nanocomposites to the same extent. To improve on the flame retardancy, the nanocomposites were combined with phosphorous-containing fire retardants (FRs) and the result compared to the benchmark halogen-containing system. The use of the cone calorimeter to investigate the fire properties of these nanocomposites showed a great reduction in peak heat release rate (PHRR) in the presence of phosphate and slight improvements in average mass loss rate (AMLR) while thermogravimetric analysis showed improvement in char yield in the presence of phosphate. Several different organically modified clays were used and they affected the flammability to different extents. The time that the resin and clay were mixed and the atmosphere in which the reaction was carried out do not have an effect on the flammability and thermal stability of the nanocomposites. The effect of curing temperature on the clay dispersion and flammability was also investigated

    Synergy Between Nanocomposite Formation and Low Levels of Bromine on Fire Retardancy in Polystyrenes

    Get PDF
    An organically-modified clay has been prepared using ammonium salts which contain an oligomeric material consisting of vinylbenzyl chloride, styrene and dibromostyrene. The presence of dibromostyrene enhances the flame retardancy of polystyrene nanocomposites compared to both the virgin polymer and polystyrene nanocomposites prepared from non-halogen-containing organically-modified clays. The nanocomposites were prepared both by bulk polymerization and melt blending and they were evaluated by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis and cone calorimetry measurements. Bulk polymerization produced nanocomposites with reduced peak heat release rate, reduced total heat release and improved thermal stability. It is noteworthy that all these improvements were obtained with clay loading as low as 3% and bromine content less than 4%

    The cryogenic RWELL: a stable charge multiplier for dual-phase liquid-argon detectors

    Full text link
    The operation of a cryogenic Resistive WELL (RWELL) in liquid argon vapor is reported for the first time. It comprises a Thick Gas Electron Multiplier (THGEM) structure coupled to a resistive Diamond-Like Carbon (DLC) anode deposited on an insulating substrate. The multiplier was operated at cryogenic temperature (90~K, 1.2~bar) in saturated argon vapor and characterized in terms of charge gain and electrical stability. A comparative study with standard, non-resistive THGEM (a.k.a LEM) and WELL multipliers, confirmed the RWELL advantages in terms of discharge quenching - thus superior gain and stability

    Towards a large-area RPWELL detector: design optimization and performance

    Full text link
    We present a new design and assembly procedure of a large-area gas-avalanche Resistive-Plate WELL (RPWELL) detector. A 50×50 cm250\times50 ~\mathrm{cm^2} prototype was tested in 80 GeV/c\mathrm{80 ~GeV/c} muon beam at CERN-SPS, presenting improved performances compared to previous ones: MIP detection efficiency over 96\% with 3\% uniformity across the entire detector area, a charge gain of ≈7.5×103\mathrm{\approx{7.5 \times 10^3}} with a uniformity of 22\%, and discharge probability below 10−6\mathrm{10^{-6}} with a few single hotspots attributed to production imperfections. These results pave the way towards further up-scaling detectors of this kind

    Novel resistive charge-multipliers for dual-phase LAr-TPCs: towards stable operation at higher gains

    Full text link
    Cryogenic versions of Resistive WELL (RWELL) and Resistive Plate WELL (RPWELL) detectors have been developed, aimed at stable avalanche multiplication of ionization electrons in dual-phase TPCs. In the RWELL, a thin resistive layer deposited on top of an insulator is inserted in between the electron multiplier (THGEM) and the readout anode; in the RPWELL, a resistive plate is directly coupled to the THGEM. Radiation-induced ionization electrons in the liquid are extracted into the gaseous phase. They drift into the THGEM's holes where they undergo charge multiplication. Embedding resistive materials into the multiplier proved to enhance operation stability due to the mitigation of electrical discharges - thus allowing operation at higher charge gain compared to standard THGEM (a.k.a. LEM) multipliers. We present the detector concepts and report on the main preliminary results

    ZBTB32 restrains antibody responses to murine cytomegalovirus infections, but not other repetitive challenges

    Get PDF
    ZBTB32 is a transcription factor that is highly expressed by a subset of memory B cells and restrains the magnitude and duration of recall responses against hapten-protein conjugates. To define physiological contexts in which ZBTB32 acts, we assessed responses by Zbtb32-/- mice or bone marrow chimeras against a panel of chronic and acute challenges. Mixed bone marrow chimeras were established in which all B cells were derived from either Zbtb32-/- mice or control littermates. Chronic infection of Zbtb32-/- chimeras with murine cytomegalovirus led to nearly 20-fold higher antigen-specific IgG2b levels relative to controls by week 9 post-infection, despite similar viral loads. In contrast, IgA responses and specificities in the intestine, where memory B cells are repeatedly stimulated by commensal bacteria, were similar between Zbtb32-/- mice and control littermates. Finally, an infection and heterologous booster vaccination model revealed no role for ZBTB32 in restraining primary or recall antibody responses against influenza viruses. Thus, ZBTB32 does not limit recall responses to a number of physiological acute challenges, but does restrict antibody levels during chronic viral infections that periodically engage memory B cells. This restriction might selectively prevent recall responses against chronic infections from progressively overwhelming other antibody specificities.National Institutes of HealthUnited States Department of Health & Human ServicesNational Institutes of Health (NIH) - USA [R01AI99109, R01AI131680, U01AI131349, K08AI04991]; New York Stem Cell FoundationOpen access journalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]
    • …
    corecore