Highly efficient planar perovskite solar cells through band alignment engineering

The simplification of perovskite solar cells (PSCs), by replacing the mesoporous electron selective layer (ESL) with a planar one, is advantageous for large-scale manufacturing. PSCs with a planar TiO2 ESL have been demonstrated, but these exhibit unstabilized power conversion efficiencies (PCEs). Herein we show that planar PSCs using TiO2 are inherently limited due to conduction band misalignment and demonstrate, with a variety of characterization techniques, for the first time that SnO2 achieves a barrier-free energetic configuration, obtaining almost hysteresis-free PCEs of over 18% with record high voltages of up to 1.19 V

Bilayer Hybrid Solar Cells Based on Triphenylamine−Thienylenevinylene Dye and TiO2

Photoinduced energy conversion from multilayers of organic dye on dense TiO2 films was investigated in bilayer hybrid solar cells. Dye layers of varying thicknesses were prepared by spin-casting the star-shaped dye [tris(dicyano-vinyl-2-thienyl)phenyl]amine (1) from solutions onto dense TiO2 on conducting glass substrates. A spin-cast layer of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and graphite powder was used for contacting the devices. Excitons generated in the dye multilayer contribute to the power conversion efficiency, reaching a maximum of ca. 0.3% at a dye layer thickness of ca. 8 nm for the devices described herein. For dye layers exceeding 5 nm, the cell performance becomes limited by the exciton diffusion length LED and the hole mobility in the organic layer. Using dye multilayers is a viable way to increase light harvesting in solid-state dye-sensitized solar cells

Spontaneous crystal coalescence enables highly efficient perovskite solar cells

Perovskite solar cells have recently reached staggering efficiencies, through efforts focused on reducing grain boundaries, by enlarging the size of the crystalline domains that constitute the perovskite films. Here, we demonstrate that smaller crystallites within perovskite films spontaneously coalesce into larger ones, even when complete devices are stored in the dark at room temperature. We show that crystal coalescence greatly improves the performance of state of the art perovskite solar cells. Our results reveal the dynamic nature of the morphology of perovskite films and highlight the crucial role that coalescence plays in producing highly efficient device

Exciton enhanced dye sensitized solar cells

Date du colloque&nbsp;: 05/2009</p

Xanthan-Based Hydrogel for Stable and Efficient Quasi-Solid Truly Aqueous Dye-Sensitized Solar Cell with Cobalt Mediator

9siAqueous dye-sensitized solar cells (DSSCs) are emerging as a promising alternative to enhance both the lifetime and environmental friendliness of traditional DSSCs. Herein, a cobalt-based, jellified (with xanthan gum) aqueous electrolyte, leading to a valuable efficiency exceeding 4% (VOC = 847 mV, JSC = 6.73 mA cm−2, fill factor =  74%), is reported. Design of experiment is used to precisely and significantly study, at a multivariate level, the effects produced by the Co2+ concentration, Co2+/Co3+ ratio, and xanthan gum amount modifications on the overall photovoltaic parameters of lab-scale solar cells.partially_openopenS. Galliano, F. Bella, M. Bonomo, F. Giordano, M. Grätzel, G. Viscardi, A. Hagfeldt, C. Gerbaldi, C. BaroloGalliano, S.; Bella, F.; Bonomo, M.; Giordano, F.; Grätzel, M.; Viscardi, G.; Hagfeldt, A.; Gerbaldi, C.; Barolo, C

Photoelectrochemical properties of mesoporous NiOx deposited on technical FTO via nanopowder sintering in conventional and plasma atmospheres

Nanoporous nickel oxide (NiO x ) has been deposited with two different procedures of sintering (CS and RDS). Both samples display solid state oxidation at about 3.1 V vs Li+/Li. Upon sensitization of CS/RDS NiO x with erythrosine b (ERY), nickel oxide oxidation occurs at the same potential. Impedance spectroscopy revealed a higher charge transfer resistance for ERY-sensitized RDS NiO x with respect to sensitized CS NiO x . This was due to the chemisorption of a larger amount of ERY on RDS with respect to CS NiO x . Upon illumination the photoinduced charge transfer between ERY layer and NiO x could be observed only with oxidized CS. Photoelectrochemical effects of sensitized RDS NiO x were evidenced upon oxide reduction. With the addition of iodine RDS NiOx electrodes could give the reduction iodine → iodide in addition to the reduction of RDS NiO x . p-type dye sensitized solar cells were assembled with RDS NiO x photocathodes sensitized either by ERY or Fast Green. Resulting overall efficiencies ranged between 0.02 and 0.04 % upon irradiation with solar spectrum simulator (Iin : 0.1 W cm −2 )

Anchoring single platinum atoms onto nickel nanoparticles affords highly selective catalysts for lignin conversion

Due to the highly complex polyphenolic structure of lignin, depolymerization without a prior chemical treatment is challenging, and new catalysts are required. Atomically dispersed catalysts are able to maximize the atomic efficiency of noble metals, simultaneously providing an alternative strategy to tune the activity and selectivity by alloying with other abundant metal supports. Here, we report a highly active and selective catalyst comprising monodispersed (single) Pt atoms on Ni nanoparticles supported on carbon (denoted as Pt1Ni/C, where Pt1 represents single Pt atoms), designed for the reductive depolymerization of lignin. Selectivity toward 4-n-propylsyringol and 4-n-propylguaiacol exceeds 90%. The activity and selectivity of the Pt1Ni/C catalyst in the reductive depolymerization of lignin may be attributed to synergistic effects between the Ni nanoparticles and the single Pt atoms

A perspective on using experiment and theory to identify design principles in dye-sensitized solar cells

Dye-sensitized solar cells (DSCs) have been the subject of wide-ranging studies for many years because of their potential for large-scale manufacturing using roll-to-roll processing allied to their use of earth abundant raw materials. Two main challenges exist for DSC devices to achieve this goal; uplifting device efficiency from the 12 to 14% currently achieved for laboratory-scale ‘hero’ cells and replacement of the widely-used liquid electrolytes which can limit device lifetimes. To increase device efficiency requires optimized dye injection and regeneration, most likely from multiple dyes while replacement of liquid electrolytes requires solid charge transporters (most likely hole transport materials – HTMs). While theoretical and experimental work have both been widely applied to different aspects of DSC research, these approaches are most effective when working in tandem. In this context, this perspective paper considers the key parameters which influence electron transfer processes in DSC devices using one or more dye molecules and how modelling and experimental approaches can work together to optimize electron injection and dye regeneration. This paper provides a perspective that theory and experiment are best used in tandem to study DSC device