80 research outputs found

    Optimization Study of the Treatment of Residual Waters of hot-dip Galvanization by the Process of Coagulation/Floculation according to the Couples (lime Ca (OH)2/ferrocryl®8723) and (lime Ca(OH)2/ polyvinylalcool) "

    Get PDF
    The treatment of wastewater from the technique of hot dip galvanizing was done in this study by the coagulation/flocculation process. The optimization of this process showed that the physicochemical and biological parameters indicating the degree of pollution were recorded in the following abatement rate: 67.76% for conductivity, 98.30% for turbidity, 96.14% for suspended solids, 98.28% for the chemical oxygen demand and 98.68% for the biochemical oxygen demand in the case of treatment with couples lime/polyvinyl alcohol. However those obtained during treatment with couples lime/ferrocryl®8723 that is used in the neutralization station Galvacier the Company are recorded in the following values: 50.18% for conductivity, 98% for turbidity, 95.78% for materials suspension, 98.18% for the chemical oxygen demand and 98.36% for the biochemical oxygen demand. According to the results of this study, we showed that treatment of waste water by the technique of hot dip galvanizing is more efficient at using the new couples lime/polyvinyl alcohol compared to couples lime/ferrocryl®8723

    Optimization of experimental parameters in the treatment of textile effluents charged by the red cibacrone using the experimental design method

    Get PDF
    We treated, in this study, textile effluents loaded with red reactive dye cibacrone by complexation using anion resin (RA A500) as substrate. From the values obtained by the experimental studies, we were able to optimize the treatment process (complexation) using the method of experimental designs using the Nemrodw software. The results concerning the theoretical parameters, allowed us to give better treatment by complexation (RA A500, Red Cibacrone) in optimal conditions, namely: the temperature in the range (20 °C), mass RA A500 order (0.2 g), the time of the order (120 min) and the pH of the order (10.5)

    Peningkatan Pemahaman Konsep Perbandingan Pecahan dengan Media Origami dan Model Tps pada Siswa Kelas III Sdn Sumbersari 1 Kota Malang

    Get PDF
    Penelitian ini bertujuan untuk meningkatkan kemampuan siswa dalam memahami perbandingan pecahan siswa kelas III SDN Sumbersari 1 Kota Malang dengan menggunakan media origami dan melalui model pembelajaran think pair share. Jenis penlitian ini adalah penelitian tindakan kelas. Penelitian ini menggunakan model Kemmis dan Taggart. Subyek dalam penelitian ini adalah siswa kelas III SDN Sumbersari Kota Malang yang berjumlah 35 siswa. Teknik pengumpulan data dilakukan dengan teknik observasi, tes, dan dokumenter. Instrumen penelitian mengunakan lembar observasi dan tes tulis. Teknik analisis data meggunakan rumus rerata yang hasilnya disampaikan dalam bentuk deskriptif kualitatif. Berdasarkan hasil yang diperoleh dapat disimpulkan bahwa, kemampuan siswa dalam memahami konsep perbandingan pecahan mengalami peningkatan pada setiap siklusnya. Siklus I diperoleh keberhasilan sebesar 77,14 % , sedangkan pada siklus II sebesar 88,57%. Penggunaan media origami dan melalui model pembelajaran TPS dapat diterapkan untuk meningkatkan pemahaman konsep perbandingan pecahan untuk siswaSD kelas II

    Split Federated Learning for 6G Enabled-Networks: Requirements, Challenges and Future Directions

    Full text link
    Sixth-generation (6G) networks anticipate intelligently supporting a wide range of smart services and innovative applications. Such a context urges a heavy usage of Machine Learning (ML) techniques, particularly Deep Learning (DL), to foster innovation and ease the deployment of intelligent network functions/operations, which are able to fulfill the various requirements of the envisioned 6G services. Specifically, collaborative ML/DL consists of deploying a set of distributed agents that collaboratively train learning models without sharing their data, thus improving data privacy and reducing the time/communication overhead. This work provides a comprehensive study on how collaborative learning can be effectively deployed over 6G wireless networks. In particular, our study focuses on Split Federated Learning (SFL), a technique recently emerged promising better performance compared with existing collaborative learning approaches. We first provide an overview of three emerging collaborative learning paradigms, including federated learning, split learning, and split federated learning, as well as of 6G networks along with their main vision and timeline of key developments. We then highlight the need for split federated learning towards the upcoming 6G networks in every aspect, including 6G technologies (e.g., intelligent physical layer, intelligent edge computing, zero-touch network management, intelligent resource management) and 6G use cases (e.g., smart grid 2.0, Industry 5.0, connected and autonomous systems). Furthermore, we review existing datasets along with frameworks that can help in implementing SFL for 6G networks. We finally identify key technical challenges, open issues, and future research directions related to SFL-enabled 6G networks

    Numerical and Experimental Study of Cross-Sectional Effects on the Mixing Performance of the Spiral Microfluidics.

    Full text link
    Mixing at the microscale is of great importance for various applications ranging from biological and chemical synthesis to drug delivery. Among the numerous types of micromixers that have been developed, planar passive spiral micromixers have gained considerable interest due to their ease of fabrication and integration into complex miniaturized systems. However, less attention has been paid to non-planar spiral micromixers with various cross-sections and the effects of these cross-sections on the total performance of the micromixer. Here, mixing performance in a spiral micromixer with different channel cross-sections is evaluated experimentally and numerically in the Re range of 0.001 to 50. The accuracy of the 3D-finite element model was first verified at different flow rates by tracking the mixing index across the loops, which were directly proportional to the spiral radius and were hence also proportional to the Dean flow. It is shown that higher flow rates induce stronger vortices compared to lower flow rates; thus, fewer loops are required for efficient mixing. The numerical study revealed that a large-angle outward trapezoidal cross-section provides the highest mixing performance, reaching efficiencies of up to 95%. Moreover, the velocity/vorticity along the channel length was analyzed and discussed to evaluate channel mixing performance. A relatively low pressure drop (<130 kPa) makes these passive spiral micromixers ideal candidates for various lab-on-chip applications

    Achieving maternal and child health gains in Afghanistan: a Countdown to 2015 country case study

    Get PDF
    Background After the fall of the Taliban in 2001, Afghanistan experienced a tumultuous period of democracy overshadowed by confl ict, widespread insurgency, and an infl ow of development assistance. Although there have been several cross-sectional assessments of health gains over the last decade, there has been no systematic analysis of progress and factors infl uencing maternal and child health in Afghanistan. Methods We undertook a comprehensive, systematic assessment of reproductive, maternal, newborn, and child health in Afghanistan over the last decade. Given the paucity of high-quality data before 2001, we relied mainly on 11 nationally representative surveys conducted between 2003 and 2013. We estimated national and subnational time trends for key reproductive, maternal, and child health indicators, and used linear regression methods to determine predictors of change in health-care service use. All analyses were weighted for sampling and design eff ects. Additional information was collated and analysed about health system performance from third party surveys and about human resources from the Afghan Ministry of Public Health. Findings Between 2003 and 2015, Afghanistan experienced a 29% decline in mortality of children younger than 5 years. Although defi nite reductions in maternal mortality remain uncertain, concurrent improvements in essential maternal health interventions suggest parallel survival gains in mothers. In a little over a decade (2003–13 inclusive), coverage of several maternal care interventions increased—eg, for antenatal care (16% to 53%), skilled birth attendance (14% to 46%), and births in a health facility (13% to 39%). Childhood vaccination coverage rates for the basic vaccines from the Expanded Programme of Immunisation (eg, BCG, measles, diphtheria-tetanus-pertussis, and three doses of polio) doubled over this period (about 40% to about 80%). Between 2005 and 2013, the number of deployed facility and community-based health-care professionals also increased, including for nurses (738 to 5766), midwives (211 to 3333), general physicians (403 to 5990), and community health workers (2682 to 28 837). Multivariable analysis of factors contributing to overall changes in skilled birth attendance and facility births suggests independent contributions of maternal literacy, deployment of community midwives, and proximity to a facility. Interpretation Despite confl ict and poverty, Afghanistan has made reasonable progress in its reproductive, maternal, newborn, and child health indicators over the last decade based on contributions of factors within and outside the health sector. However, equitable access to health care remains a challenge and present delivery models have high transactional costs, aff ecting sustainability. To maintain and further accelerate health and development gains, future strategies in Afghanistan will need to focus on investments in improving social determinants of health and targeted cost-eff ective interventions to address major causes of maternal and newborn mortality

    Circulating and intraprostatic sex steroid hormonal profiles in relation to male pattern baldness and chest hair density among men diagnosed with localized prostate cancers

    Get PDF
    Background: Prospective cohort studies of circulating sex steroid hormones and prostate cancer risk have not provided a consistent association, despite evidence from animal and clinical studies. However, studies using male pattern baldness as a proxy of early-life or cumulative androgen exposure have reported significant associations with aggressive and fatal prostate cancer risk. Given that androgens underlie the development of patterned hair loss and chest hair, we assessed whether these two dermatological characteristics were associated with circulating and intraprostatic concentrations of sex steroid hormones among men diagnosed with localized prostate cancer. Methods:We included 248 prostate cancer patients from the NCI Prostate Tissue Study, who answered surveys and provided a pre-treatment blood sample as well as fresh frozen adjacent normal prostate tissue. Male pattern baldness and chest hair density were assessed by trained nurses before surgery. General linear models estimated geometric means and 95% confidence intervals (95%CIs) of each hormone variable by dermatological phenotype with adjustment for potential confounding variables. Subgroup analyses were performed by Gleason score (\u3c7 vs ≥7) and race (European American vs. African American). Results: We found strong positive associations of balding status with serum testosterone, dihydrotestosterone (DHT), estradiol, and sex hormone-binding globulin (SHBG), and a weak association with elevated intraprostatic testosterone. Conversely, neither circulating nor intraprostatic sex hormones were statistically significantly associated with chest hair density. Age-adjusted correlation between binary balding status and three-level chest hair density was weak (r = 0.05). There was little evidence to suggest that Gleason score or race modified these associations. Conclusions: This study provides evidence that balding status assessed at a mean age of 60 years may serve as a clinical marker for circulating sex hormone concentrations. The weak-to-null associations between balding status and intraprostatic sex hormones reaffirm differences in organ-specific sex hormone metabolism, implying that other sex steroid hormone-related factors (eg, androgen receptor) play important roles in organ-specific androgenic actions, and that other overlapping pathways may be involved in associations between the two complex conditions

    Synthesis, crystal structure, DFT calculations, Hirshfeld surface analysis, energy frameworks, molecular dynamics and docking studies of novel isoxazolequinoxaline derivative (IZQ) as anti-cancer drug

    Get PDF
    Quinoxaline derivatives with the molecular formula C8H6N2] also named benzopyrazines, which are a valuable class of heterocyclic compounds useful for their numerous industrial and pharmaceutical applications. The new isoxazolquinoxalin (IZQ) 3-pheny1-14(3-(p-toly1)-4,5-dihydroisoxazol-5yl)methyl)quinoxalin-2(1H)- one (5) has been synthesized with good yield by stirring the compounds of 1-allyl-3-phenylquinoxalin-2(1H)-one (3, 3.8mmol), and (E)-4 methylbenzaldehydeoxime (4, 1.3mmol) in 20 ml of chloroform. The aqueous solution of sodium hypochlorite (10 ml of water bleach 12 degrees) was added drop wise using bromine funnel. The mixture was stirring at 0 degrees C temperature for 6 hours. Then it dried to obtain a crude product which on recrystallization with ethanol afforded the title compound (5) as colourless rectangular block shape crystals, and then confirmed by H NMR, LC-MS spectra. The structure of the compound has been confirmed by single crystal X-ray diffraction technique. The compound crystallizes in the monoclinic crystal system with the space group P2(1)/c. The unit cell constants; a =15.9437(6) angstrom, b =16.3936(6) angstrom, c =7.4913(3) angstrom, and beta =94.178(2)degrees. DFT calculations were carried out and HOMO-LUMO energy levels have been determined. In the structure, both Intermolecular and intramolecular hydrogen bonds of the type C-H center dot center dot center dot O were observed along with C-H center dot center dot center dot cg interactions. Hirshfeld surface studies were performed to understand the different interaction contacts of the molecule and the molecular packing strength of the crystal. Energy frameworks were constructed through different intermolecular interaction energies to investigate the stability of the compound and to know type of the dominate energy. Docking studies predicted anti-cancer activity of the title molecule against homo sapiens protein (pdb code:6HVH) and exhibited prominent interactions at active site region. (C) 2021 Elsevier B.V. All rights reserved
    corecore