Results of literature search on dielectric properties and electron interaction phenomena related to spacecraft charging

The objective of the literature search was to determine the required material properties and electron interaction parameters needed for modeling charge buildup and breakdown in insulators. A brief overview of the results of the literature search is given. A partial list of the references covered is included in a bibliography. Although inorganic insulators were also considered in the search, coverage is limited to the organics, primarily Kapton and Teflon

Automated weld torch guidance control system

A device for automatically controlling the movement of a welding torch while welding an elongated joint is described. A charge injection television camera is carried on a movable support. The camera includes a matrix of individual light sensing video elements which generate voltages responsive to light reflected off of the joint and surrounding areas of the work piece. The voltages produced by the pixels are converted to digital words which are fed to a microprocessor for generating an error signal. This error signal is fed to a digital motor which is used to drive a movable support upon which the television camera is carried

Cooling Fermions in an Optical Lattice by Adiabatic Demagnetization

The Fermi-Hubbard model describes ultracold fermions in an optical lattice and exhibits antiferromagnetic long-ranged order below the N\'{e}el temperature. However, reaching this temperature in the lab has remained an elusive goal. In other atomic systems, such as trapped ions, low temperatures have been successfully obtained by adiabatic demagnetization, in which a strong effective magnetic field is applied to a spin-polarized system, and the magnetic field is adiabatically reduced to zero. Unfortunately, applying this approach to the Fermi-Hubbard model encounters a fundamental obstacle: the $SU(2)$ symmetry introduces many level crossings that prevent the system from reaching the ground state, even in principle. However, by breaking the $SU(2)$ symmetry with a spin-dependent tunneling, we show that adiabatic demagnetization can achieve low temperature states. Using density matrix renormalization group (DMRG) calculations in one dimension, we numerically find that demagnetization protocols successfully reach low temperature states of a spin-anisotropic Hubbard model, and we discuss how to optimize this protocol for experimental viability. By subsequently ramping spin-dependent tunnelings to spin-independent tunnelings, we expect that our protocol can be employed to produce low-temperature states of the Fermi-Hubbard Model.Comment: References adde

Solar cell radiation response near the interface of different atomic number materials

The response of cobalt 60 irradiated N/P silicon solar cells was measured as a function of the atomic number of the medium adjacent to the cell and the direction of the gamma ray beam. The interpositioning of various thicknesses of aluminum between the adjacent material and the cell had the effect of moving the cell to various locations in an approximate monatomic numbered medium. Using this technique the solar cell response was determined at various distances from the interface for gold and beryllium. The results were compared with predictions based upon ionization chamber measurements of dose perturbations in aluminum and found to agree within five percent. Ionization chamber data was then used to estimate the influence of various base contact materials

Model of Transcriptional Activation by MarA in Escherichia coli

We have developed a mathematical model of transcriptional activation by MarA in Escherichia coli, and used the model to analyze measurements of MarA-dependent activity of the marRAB, sodA, and micF promoters in mar-rob- cells. The model rationalizes an unexpected poor correlation between the mid-point of in vivo promoter activity profiles and in vitro equilibrium constants for MarA binding to promoter sequences. Analysis of the promoter activity data using the model yielded the following predictions regarding activation mechanisms: (1) MarA activation of the marRAB, sodA, and micF promoters involves a net acceleration of the kinetics of transitions after RNA polymerase binding, up to and including promoter escape and message elongation; (2) RNA polymerase binds to these promoters with nearly unit occupancy in the absence of MarA, making recruitment of polymerase an insignificant factor in activation of these promoters; and (3) instead of recruitment, activation of the micF promoter might involve a repulsion of polymerase combined with a large acceleration of the kinetics of polymerase activity. These predictions are consistent with published chromatin immunoprecipitation assays of interactions between polymerase and the E. coli chromosome. A lack of recruitment in transcriptional activation represents an exception to the textbook description of activation of bacterial sigma-70 promoters. However, use of accelerated polymerase kinetics instead of recruitment might confer a competitive advantage to E. coli by decreasing latency in gene regulation.Comment: 30 pages, 2 figure

Structural modeling and functional analysis of the essential ribosomal processing protease Prp from Staphylococcus aureus

In Firmicutes and related bacteria, ribosomal large subunit protein L27 is encoded with a conserved N-terminal extension that is removed to expose residues critical for ribosome function. Bacteria encoding L27 with this N-terminal extension also encode a sequence-specific cysteine protease, Prp, which carries out this cleavage. In this work, we demonstrate that L27 variants with an un-cleavable N-terminal extension, or lacking the extension (pre-cleaved), are unable to complement an L27 deletion in Staphylococcus aureus. This indicates that N-terminal processing of L27 is not only essential but possibly has a regulatory role. Prp represents a new clade of previously uncharacterized cysteine proteases, and the dependence of S. aureus on L27 cleavage by Prp validates the enzyme as a target for potential antibiotic development. To better understand the mechanism of Prp activity, we analyzed Prp enzyme kinetics and substrate preference using a fluorogenic peptide cleavage assay. Molecular modeling and site-directed mutagenesis implicate several residues around the active site in catalysis and substrate binding, and support a structural model in which rearrangement of a flexible loop upon binding of the correct peptide substrate is required for the active site to assume the proper conformation. These findings lay the foundation for the development of antimicrobials that target this novel, essential pathway

Automatic weld torch guidance control system

A highly reliable, fully digital, closed circuit television optical, type automatic weld seam tracking control system was developed. This automatic tracking equipment is used to reduce weld tooling costs and increase overall automatic welding reliability. The system utilizes a charge injection device digital camera which as 60,512 inidividual pixels as the light sensing elements. Through conventional scanning means, each pixel in the focal plane is sequentially scanned, the light level signal digitized, and an 8-bit word transmitted to scratch pad memory. From memory, the microprocessor performs an analysis of the digital signal and computes the tracking error. Lastly, the corrective signal is transmitted to a cross seam actuator digital drive motor controller to complete the closed loop, feedback, tracking system. This weld seam tracking control system is capable of a tracking accuracy of + or - 0.2 mm, or better. As configured, the system is applicable to square butt, V-groove, and lap joint weldments

Retinoic acid induces the differentiation of B cell hybridomas from patients with common variable immunodeficiency.

Human-human B cell hybridomas constructed from B lymphocytes of common variable immunodeficiency (CVI) patients and the nonsecreting cell line WIL2/729 HF consistently secrete low levels of Ig and appear to retain a defect characteristic of the CVI patient's B cells. We assessed the differentiative capacity of retinoic acid (RA) on these hybridomas, as well as on hybridomas constructed from normal B cells and from patients with selective IgA deficiency. RA at concentrations varying between 10(-5) and 10(-9) M augmented IgM secretion 4-20-fold from four of four CVI hybridomas tested, but did not affect Ig secretion from normal or IgA-deficiency hybridomas. In support of this elevated Ig secretion, RA enhanced the de novo synthesis of biosynthetically labeled light (kappa) and heavy (mu) Ig (up to 4- and 15-fold, respectively) in the CVI hybridoma line JK32.1. The increase in IgM synthesis/secretion could not be accounted for by RA-induced alteration in the cell cycle. In inducing this increase in IgM production, RA was found to affect two aspects of Ig gene expression: (a) the steady-state levels of heavy and light chain mRNAs were enhanced, and (b) the processing of mu heavy chain transcripts to the secreted mRNA form became favored over the membrane mRNA form. We also show that expression of Leu-17 (CD38), a surface marker that is re-expressed in the late pre-plasma stage of B cell development, was increased by RA from less than 20% to greater than 90% of the total cell population, with a concomitant 4-10-fold augmentation in the mean fluorescence intensity. Changes in both Leu-17 expression and de novo Ig synthesis were prominent by 24 h, but could be observed as early as 8 h after induction. Taken together, our study demonstrates that RA affects a marked alteration in the differentiated state of the CVI hybridoma clones. This finding suggests that retinoids can enhance the functional capabilities of B cells with defects in maturation and support further studies to evaluate their clinical potential in CVI