Tunable crosslinking and adhesion of gelatin hydrogels via bioorthogonal click chemistry

Engineering cytocompatible hydrogels with tunable physico-mechanical properties as a biomimetic three-dimensional extracellular matrix (ECM) is fundamental to guide cell response and target tissue regeneration or development of in vitro models. Gelatin represents an optimal choice given its ECM biomimetic properties; however, gelatin cross-linking is required to ensure structural stability at physiological temperature (i.e., T > Tsol–gel gelatin). Here, we use a previously developed cross-linking reaction between tetrazine (Tz)- and norbornene (Nb) modified gelatin derivatives to prepare gelatin hydrogels and we demonstrate the possible tuning of their properties by varying their degree of modification (DOM) and the Tz/Nb ratio (R). The percentage DOM of the gelatin derivatives was tuned between 5 and 15%. Hydrogels prepared with higher DOM cross-linked faster (i.e., 10–20 min) compared to hydrogels prepared with lower DOM (i.e., 60–70 min). A higher DOM and equimolar Tz/Nb ratio R resulted in hydrogels with lower weight variation after immersion in PBS at 37 °C. The mechanical properties of the hydrogels were tuned by varying DOM and R by 1 order of magnitude, achieving elastic modulus E values ranging from 0.5 (low DOM and nonequimolar Tz/Nb ratio) to 5 kPa (high DOM and equimolar Tz/Nb ratio). Human dental pulp stem cells were embedded in the hydrogels and successfully 3D cultured in the hydrogels (percentage viable cells >85%). An increase in metabolic activity and a more elongated cell morphology was detected for cells cultured in hydrogels with lower mechanical properties (E < 1 kPa). Hydrogels prepared with an excess of Tz or Nb were successfully adhered and remained in contact during in vitro cultures, highlighting the potential use of these hydrogels as compartmentalized coculture systems. The successful tuning of the gelatin hydrogel properties here developed by controlling their bioorthogonal cross-linking is promising for tissue engineering and in vitro modeling applications

Mesenchymal Cell Community Effect in Whole Tooth Bioengineering

In vitro expanded cell populations can contribute to bioengineered tooth formation but only as cells that respond to tooth-inductive signals. Since the success of whole tooth bioengineering is predicated on the availability of large numbers of cells, in vitro cell expansion of tooth-inducing cell populations is an essential requirement for further development of this approach. We set out to investigate if the failure of cultured mesenchyme cells to form bioengineered teeth might be rescued by the presence of uncultured cells. To test this, we deployed a cell-mixing approach to evaluate the contributions of cell populations to bioengineered tooth formation. Using genetically labeled cells, we are able to identify the formation of tooth pulp cells and odontoblasts in bioengineered teeth. We show that although cultured embryonic dental mesenchyme cells are unable to induce tooth formation, they can contribute to tooth induction and formation if combined with noncultured cells. Moreover, we show that teeth can form from cell mixtures that include embryonic cells and populations of postnatal dental pulp cells; however, these cells are unable to contribute to the formation of pulp cells or odontoblasts, and at ratios of 1:1, they inhibit tooth formation. These results indicate that although in vitro cell expansion of embryonic tooth mesenchymal cells renders them unable to induce tooth formation, they do not lose their ability to contribute to tooth formation and differentiate into odontoblasts. Postnatal pulp cells, however, lose all tooth-inducing and tooth-forming capacity following in vitro expansion, and at ratios &gt;1:3 postnatal:embryonic cells, they inhibit the ability of embryonic dental mesenchyme cells to induce tooth formation.</jats:p

Composition of Mineral Produced by Dental Mesenchymal Stem Cell

Mesenchymal stem cells isolated from different dental tissues have been described to have osteogenic/odontogenic-like differentiation capacity, but little attention has been paid to the biochemical composition of the material that each produces. Here, we used Raman spectroscopy to analyze the mineralized materials produced in vitro by different dental cell populations, and we compared them with the biochemical composition of native dental tissues. We show that different dental stem cell populations produce materials that differ in their mineral and matrix composition and that these differ from those of native dental tissues. In vitro, BCMP (bone chip mass population), SCAP (stem cells from apical papilla), and SHED (stem cells from human-exfoliated deciduous teeth) cells produce a more highly mineralized matrix when compared with that produced by PDL (periodontal ligament), DPA (dental pulp adult), and GF (gingival fibroblast) cells. Principal component analyses of Raman spectra further demonstrated that the crystallinity and carbonate substitution environments in the material produced by each cell type varied, with DPA cells, for example, producing a more carbonate-substituted mineral and with SCAP, SHED, and GF cells creating a less crystalline material when compared with other dental stem cells and native tissues. These variations in mineral composition reveal intrinsic differences in the various cell populations, which may in turn affect their specific clinical applications

Scaffold-based developmental tissue engineering strategies for ectodermal organ regeneration

Tissue engineering (TE) is a multidisciplinary research field aiming at the regeneration, restoration, or replacement of damaged tissues and organs. Classical TE approaches combine scaffolds, cells and soluble factors to fabricate constructs mimicking the native tissue to be regenerated. However, to date, limited success in clinical translations has been achieved by classical TE approaches, because of the lack of satisfactory biomorphological and biofunctional features of the obtained constructs. Developmental TE has emerged as a novel TE paradigm to obtain tissues and organs with correct biomorphology and biofunctionality by mimicking the morphogenetic processes leading to the tissue/organ generation in the embryo. Ectodermal appendages, for instance, develop in vivo by sequential interactions between epithelium and mesenchyme, in a process known as secondary induction. A fine artificial replication of these complex interactions can potentially lead to the fabrication of the tissues/organs to be regenerated. Successful developmental TE applications have been reported, in vitro and in vivo, for ectodermal appendages such as teeth, hair follicles and glands. Developmental TE strategies require an accurate selection of cell sources, scaffolds and cell culture configurations to allow for the correct replication of the in vivo morphogenetic cues. Herein, we describe and discuss the emergence of this TE paradigm by reviewing the achievements obtained so far in developmental TE 3D scaffolds for teeth, hair follicles, and salivary and lacrimal glands, with particular focus on the selection of biomaterials and cell culture configurations

Dental pulp in mature replanted human teeth:morphological alterations and metalloproteineses-2 and -9, Annexin-5, BCL-2 and iNOS modulation

Tooth replantation, as a treatment concept, has been subject to controversies regarding the mechanism as well as the various parameters underlying this process. This work aimed to study time-related changes in the pulp of replanted mature human premolars through the changes in the levels of certain factors involved in the underlying mechanisms of pulpal tissue healing after replantation. Eleven experimental mature teeth were extracted, immediately replanted in the original socket and left without any other intervention for 1, 2, 3 and 12 weeks before re-extraction. Three premolars served as control. All specimens were subject to histological analysis and the levels of MMP-2, MMP-9, Annexin V, iNOS and BCL-2 (anti-apoptotic family) were analyzed employing immunohistochemistry. The results showed degradation of the extracellular matrix (ECM), inflammatory cell infiltrate, loss in pulpo-dentine interface and loss of odontoblasts in the dental pulp tissue. This was accompanied by increase over time of MMP-9, Annexin V, iNOS and a decrease of BCL-2 and MMP-2, suggesting that apoptosis increased throughout the experimental period

DENTAL CARIES IN CHILDREN WITH ASTHMA UNDERGOING TREATMENT WITH SHORT-ACTING- f2- AGONISTS

AIM: This study sought to evaluate possible higher risk for dental caries among asthmatic children undergoing treatment with short-acting beta2-agonists. METHODS: Dental clinical assessments, saliva analysis and a questionnaire survey were carried out on 60 children aged 6-12, of whom 30 were asthmatic subjects undergoing treatment with short-acting beta2-agonists and 30 were used as controls. The obtained data for DMFT/dmft scores, Silness-L\uf6e plaque index, buffer capacity and bacteria counts for Streptococcus mutans and Lactobacillus in the saliva, oral hygiene and dietary habits were compared using Student t-test and Pearson chi-square test. RESULTS: We registered a higher DMFT score among asthmatics of 1.2-/+1.8 (SD) and 0.3-/+0.8 among non-asthmatic patients (p<0.05), while comparison of dmft scores between the examined groups showed not significant (Student t-test). Saliva analysis revealed lower buffer capacity in 43.3% of the asthmatic children, followed by higher cariogenic bacteria counts in their saliva (p<0.05 Student t-test). These results show the lower plaque index in the asthmatic group (1.6+/-0.4) compared with the control (2.1+/-0.3). Asthmatic children expressed better oral-health habits with more frequent tooth- brushing and usage of fluorides. CONCLUSION: The results from our study suggest a higher caries-susceptibility among asthmatic children undergoing treatment with short-acting beta2-agonists, but a clear association between these drugs, salivary changes and dental caries among children, still remains to be demonstrated