19 research outputs found

    jection Modeling and Rheology of Silicon Nitride Powder Suspensions

    No full text
    Maste

    사출 금형을 위한 협업 설계 시스템의 개발

    No full text
    학위논문(석사)--서울대학교 대학원 :기계설계학과,2000.Maste

    적외선 분광학을 이용한 (K[1- x]Cs[x])₂ZnCl₄혼합결정의 정합-비정합상전이에 관한 연구

    No full text
    학위논문(석사)--서울대학교 대학원 :물리학과,1996.Maste

    코크스용 석탄의 기공형성과 CO2 반응성에 대한 연구

    No full text
    Master이 연구는 코크스용 석탄의 탄화과정중 발생하는 기공변화와 CO2 가스화 반응에 대한 연구입니다. porosimeter와 BET 측정 장비를 통해 기공율 및 비 표면적을 측정하였으며, 또한 OM과 SEM을 통하여 pore 구조의 형태를 관측하했습니다. 탄화 과정 중 pore는 생성과 성장 그리고 붕괴가 일어나며, 800℃까지는 pore의 생성과 성장이 주를 이루며, 이 후에는 붕괴가 주를 이룹니다. 고 반응성 char는 network한 기공 구조가 char 내부에 깊히 연결되어 있으며, 저 반응성 char는 pore가 개별적으로 존재하고 있습니다. CO2 가스화 반응을 무게변화(TGA)와 가스분석(QMS)를 통하여 실시 했으며, CO2 가스화 반응은 하나의 율속 단계로 설명할수 없으며, 초기에는 화학반응이 가스화 반응을 지배하다가 온도 증가에 따라 확산이 가스화 반응을 지배합니다. 이러한 복합적 과정을 통해 얻어진 활성화 에너지는 183-269 kJ/mol 입니다.In the current study, pore development of coking coals during carbonization and CO2 gasification behavior of their chars were investigated. Total porosity and specific surface area were measured using the mercury pressure porosimeter and BET analyses. In addition, the pore structure of char was observed using the optical microscopy (OM) and scanning electron microscopy (SEM). Pore properties in carbonization were determined by competition among the nucleation, growth and collapse of pores. Pore development occurred up to 800℃ and then collapse was followed. The highly reactive char has a network pore which is distributed inside of char. On the other hand, the less reactive char has a separated pore which was not networked inside of char. CO2 gasification of char was carried out using the thermogravimetric analyses (TGA) and quadruple mass spectrometry (QMS). The CO2 gasification of char could not be explained in terms of a single rate-controlling step. In the initial stage, the reaction rate was controlled by chemical reaction and by diffusion in the later one. The calculated activation energy values were evaluated to range from 183 to 268 kJ/mol

    The Situation and Vision of Sam-ae Church, and the Embodiment of Sam-ae Spirit

    Full text link

    자원제약 임베디드 시스템을 위한 뉴럴 네트워크 최적화 연구

    No full text
    학위논문(석사)--아주대학교 일반대학원 :AI융합네트워크학과,2022. 2최근 다양한 뉴럴 네트워크 응용프로그램을 사물인터넷과 같은 자원제약이 심한 임베디드 시스템에서 직접 동작시키려는 시도가 증가하고 있다. 하지만 임베디드 시스템은 연산 속도와 메모리가 매우 제한적이기 때문에 동작시킬 수 있는 뉴럴 네트워크 모델의 크기가 제약되고 실시간성을 만족하지 못 할 수 있다. 이를 위해 본 학위 논문에서는 주어진 뉴럴 네트워크 모델을 메모리와 수행시간 요구사항을 만족 할 수 있도록 자동으로 경량화하고 타겟 내장형 시스템에서 수행 가능한 코드를 자동으로 생성하는 프레임워크를 제안한다. 그 후 다수의 디바이스를 활용하여 고성능의 뉴럴 네트워크를 구동시키는 분산 뉴럴 네트워크에 대해 소개하고 통신 실패에 강인하고 통신량이 적은 분산 알고리즘을 제안한다. 제안하는 자동 경량화 프레임워크를 활용하여, 다양한 수행시간과 메모리 요구사항을 만족할 수 있도록 뉴럴 네트워크 모델을 실제 임베디드 시스템에 맞게 경량화 하였다. 또한 초해상도 이미지 복원과 객체 탐지와 같은 회귀 모델에서도 최적화를 적용하여 다양한 뉴럴 네트워크 어플리케이션에서 최적화가 효과적임을 검증하였다.제1장. 서 론 1 제2장. 관련 연구 4 제3장. 배경 지식 7 제1절. CMSIS-NN 7 제2절. Filter pruning 9 제4장. 경량 뉴럴 네트워크 자동 생성 프레임워크 12 제1절. 자동 profiling(Auto profiling) 12 제2절. 뉴럴 네트워크 경량화(Auto network compression) 14 제3절. 자동 코드 생성(Auto code generation) 16 제5장. 실험 19 제1절. 실험 환경 19 제2절. 실험 결과 20 제1항. 메모리 제약 20 제2항. 프루닝 방식 비교 22 제3항. 탐색 방법 비교 24 제4항. 수행시간 요구사항 24 제6장. 회귀(Regression) 모델 최적화 실험 27 제1절. 초해상도 이미지 복원(Super-resolution) 최적화 27 제1항. 초해상도 이미지 복원 27 제2항. 초해상도 이미지 복원 최적화 실험 29 제2절. 객체 탐지(Object detection) 최적화 31 제1항. 객체 탐지 31 제2항. 객체 탐지 최적화 실험 34 제7장. 결론 35 참고문헌 36 Abstract 40Maste

    Academic Traditions of Christian Universities in the Light of Life, Mission and Christian Spirit of Horace Grant Underwood

    No full text

    THE ROLE OF BONE MORPHOGENETIC PROTEIN IN THE TOOTH CULTURE

    Get PDF
    Objectives : The proper development of the facial structures relies upon a sequence of tightly regulated signaling interactions between the ectoderm and mesoderm involving the participation of several families of signaling molecules. Among these, bone morphogenetic proteins (BMPs) have been suggested to be a key signal that regulates the development of the mandible and the initiation and morphogenesis of the teeth. The aim of this study was to examine the artificial development of the mandibular structures and to examine the role of BMPs on tooth morphogenesis and differentiation using an organ culture system. Materials and Methods : The tooth germs from Ed 11.5, 13.5 mice were dissected, and transplanted into the diastema of the mandible primordia. The mandibles containing the transplanted tooth germs were cultured in vitro. During this period, beads soaked with BMP4 were implanted around the transplanted tooth germs. In addition, a diastema block containing the transplanted tooth germ was dissected, then transferred to an adult mouse kidney. After the organ culture, the developing mandibular explant was removed from the kidney and prepared for the tissue specimens. Odontogeneis of the transplanted tooth germs was examined after Hematoxylin-eosin, Masson-trichrome staining. Results : Proliferation and differentiation of the tooth germs cultured in the diastema was observed. In the BMP4-treated tooth germs, the formation of the first and second molars was noted. The crown of the developing tooth showed the formation of a mature cusp with the deposition of enamel and dentin matrix. In conclusion, it was confirmed that BMP4 is involved in the formation of a dental crown and the differentiation of ameloblasts and odontoblasts of the molar tooth during the development of the transplanted tooth germs

    Psychometric Properties of the Psychological Need Satisfaction in Exercise Scale

    No full text
    corecore