320 research outputs found
Synthesis and reactivity of half-sandwich (η 5 -C 5 Me 5 )Ir(iii) complexes of a cyclometallated aryl phosphine ligand
Reaction of the Ir(iii) dimer [(η 5 -C 5 Me 5 )IrCl 2 ] 2 with PMeXyl 2 (Xyl = 2,6-C 6 H 3 Me 2 ), in the presence of the poorly coordinating base 2,2,6,6-tetramethyl piperidine, gives a chloride complex 1-Cl, resulting from hydrogen chloride elimination involving one of the phosphine benzylic hydrogen atoms and concomitant cyclometallation. Related compounds containing other halide or pseudohalide ligands, 1-Br, 1-Cl, 1-SCN, can be made, the latter featuring S-coordination of the ambidentate thiocyanate to the soft Ir(iii) Lewis acid centre, as suggested by IR data and demonstrated by X-ray crystallography. Hydride 2-H, and alkyl derivatives 3 (Me) and 4 (CH 2 SiMe 3 ) can also be prepared from 1-Cl and appropriate hydride and alkylating reagents. An interesting H/D exchange chemistry that occurs in the presence of CD 3 OD has been disclosed for 1-Cl, 1-Br and 2-H. For the halide derivatives, deuterium incorporation takes place into the methylene and methyl sites of their cyclometallated ligand, whereas for 2-H only the hydride and methylene (Ir-CH 2 ) protons participate in the exchange, which is strikingly accelerated by catalytic amounts of acids.Ministerio de Ciencia e Innovación CTQ2010-17476Consolider-Ingenio2010 CSD2007-0000Junta de Andalucia FQM-119, P09-FQM-483
Mechanism of Alkyl Migration in Diorganomagnesium 2,6-Bis(imino)pyridine Complexes: Formation of Grignard-Type Complexes with Square-Planar Mg(II) Centers
Dialkylmagnesium compounds [MgR2L2] (R = n-Bu, L = none or R = Bn, L = THF) react with 2,6-bis(imino)pyridines (BIP) to afford different types of Mg(II) alkyl complexes, depending on the nature of R. For R = n-Bu, thermally stable products resulting from selective alkyl transfer to the pyridine nitrogen (N1) atom are obtained. However, NMR studies showed that the reaction of [Mg(Bn)2THF2] with iPrBIP at −65 °C leads to a thermally unstable product arising from benzyl migration to position C2 in the pyridine ring. Above +5 °C, this compound rearranges, cleanly yielding a mixture of two isomeric complexes, in which the benzyl group has migrated to positions C3 or C4 of the central ring, respectively. Similar isomeric mixtures were obtained when [Mg(Bn)2THF2] was reacted with iPrBIP or MesBIP at room temperature. Such mixtures are thermally stable below 80 °C, but at this temperature, the 3-benzyl isomer converts into the thermodynamically favored 4-benzyl product, albeit not quantitatively. An alternate route was devised for the selective syntheses of the latter type of compounds. The X-ray diffraction structure of one of them provided an unusual example of a square-planar alkylmagnesium(II) center.Ministerio de Economía e Innovación CTQ2015-68978-
Oxygen-Induced Dimerization of Alkyl-Manganese(II) 2,6-Bisiminopyridine Complexes: Selective Synthesis of a New Ditopic NNN-Pincer Ligand
The outcome of the reaction of manganese(II) dialkyls with 2,6-bisiminopyridine (BIP) ligands is dramatically altered by the presence of very small amounts of oxygen (< 0.5 mol %), leading to binuclear species. These arise from the dimerization of the initial product, a Mn(II) 4-alkyl-2,6-bisiminodihydropyridinate alkyl complex. Cleavage of the binuclear Mn products with methanol affords the free dimeric bases, which can be regarded as a special type of ditopic NNN pincer ligand with an unusual tricyclic framework. The coordinative ability of the new ligands has been probed with the syntheses of Zn and Pd organometallic derivativesMinisterio de Economía e Innovación TQ2015- 68978-
Novel bis (1,3,2-diazaphospholidine) ligands for asymmetric catalysis
A family of modularly designed chiral bis(1,3,2-diazaphospholidines) with N-aryl substituents (NP-PN) is reported. These compounds have been prepared in two steps from readily available (R,R)-1,2-diaminocyclohexane and tetrachlorodiphosphines. Examples in the set differ in the backbone and the aryl substituents, aiming at their application in asymmetric catalysis. Thus, [Rh(NBD)(NP-PN)]BF4 complexes lead to active catalysts in the hydrogenation of methyl α-acetamidoacrylate, which provide enantioselectivities up to 96% ee. In addition, NP-PN ligands also generate active catalysts in the hydroformylation of vinyl acetate, leading to high regioselectivities (iso:n ratio higher than 99:1) and enantioselectivities up to 65% ee. © 2013 American Chemical Society.Ministerio de Ciencia e Innovación CTQ2009-11867, CONSOLIDER-INGENIO CSD 2007- 00006Junta de Andalucía 2008/ FQM-3830, 2009/FQM-483
Synthesis, structure and reactivity of Pd and Ir complexes based on new lutidine-derived NHC/phosphine mixed pincer ligands
Coordination studies of new lutidine-derived hybrid NHC/phosphine ligands (CNP) to Pd and Ir have been performed. Treatment of the square-planar [Pd(CNP)Cl](AgCl2) complex 2a with KHMDS produces the selective deprotonation at the CH2P arm of the pincer to yield the pyridine-dearomatised complex 3a. A series of cationic [Ir(CNP)(cod)]+ complexes 4 has been prepared by reaction of the imidazolium salts 1 with Ir(acac)(cod). These derivatives exhibit in the solid state, and in solution, a distorted trigonal bipyramidal structure in which the CNP ligands adopt an unusual C(axial)–N(equatorial)–P(equatorial) coordination mode. Reactions of complexes 4 with CO and H2 yield the carbonyl species 5a(Cl) and 6a(Cl), and the dihydrido derivatives 7, respectively. Furthermore, upon reaction of complex 4b(Br) with base, selective deprotonation at the methylene CH2P arms is observed. The, thus formed, deprotonated Ir complex 8b reacts with H2 in a ligand-assisted process leading to the trihydrido complex 9b, which can also be obtained by reaction of 7b(Cl) with H2 in the presence of KOtBu. Finally, the catalytic activity of Ir–CNP complexes in the hydrogenation of ketones has been briefly assessed.CTQ2013-45011-P, CTQ2016-80814-R and CTQ2014 -51912-RE
New sulfur-phosphine ligands derived from sugars: synthesis and application in palladium-catalyzed allylic alkylation and in rhodium asymmetric hydrogenation
An efficient route to mixed phosphine / thioglycoside ligands type IV starting from glucose pentaacetate is reported. In only five steps the key epoxide 6 has been obtained in high yield and its structure determined by X-ray analysis. The ring opening of the tert-butyl 4,6-O-benzylidene- 2,3-anhydro-1-thio-β-D-allopyranoside 6 with diphenylphosphinyl lithium afforded the desired ligand as a single diastereoisomer. The prepared compounds act as a bidentate ligands as shown by X-ray analysis of the Rh(I)-complex 12. Preliminary results on the behaviour of these ligands in Pd(0)-catalyzed allylic alkylation, and in Rh(I)-catalyzed enamide hydrogenation are also reported.Dirección General de Investigaciones Científicas y Técnicas CTQ2006- 15515-CO2-01 y CTQ2007-61185Junta de Andalucía P06-FQM-01852 y P07- FQM-2774Fundación Ramón Arece
Copper(I)-Arene Complexes with a Sterically Hindered Tris(pyrazolyl)borate Ligand
A series of arene copper(I) complexes bearing the hydrotris(3-mesitylpyrazolyl)borate ligand (Tp(Ms)) of general formula Tp(Ms)Cu(arene) (arene = toluene, 1; nitrobenzene, 2; chlorobenzene, 3; and iodobenzene, 4) has been structurally characterized. Complexes 1-3 show a (2)-arene coordination mode to the copper center, whereas the iodobenzene ligand in 4 is coordinated to Cu by the iodine atom. In the absence of excess arene, these compounds undergo arene loss and formation of the dinuclear complex [Tp(Ms)Cu](2) (5), which has also been structurally characterized. Given the number of catalytic systems described in which the Tp(x)Cu core plays the main role, the observation of these adducts assesses their presence in those catalytic systems, a feature not described to date.Support for this work was provided by MINECO (CTQ2014-52769-C3-1-R
New sulfur-phosphine ligands derived from sugars: synthesis and application in palladium-catalyzed allylic alkilation and in rhodium asymmetric hydrogenation
14 páginas, 4 figuras, 5 esquemas, 2 tablas.An efficient route to mixed phosphine / thioglycoside ligands type IV starting from glucose pentaacetate is reported. In only five steps the key epoxide 6 has been obtained in high yield and its structure determined by X-ray analysis. The ring opening of the tert-butyl 4,6-O-benzylidene-2,3-anhydro-1-thio-β-D-allopyranoside 6 with diphenylphosphinyl lithium afforded the desired ligand as a single diastereoisomer. The prepared compounds act as a bidentate ligands as shown by X-ray analysis of the Rh(I)-complex 12. Preliminary results on the behaviour of these ligands in Pd(0)-catalyzed allylic alkylation, and in Rh(I)-catalyzed enamide hydrogenation are also reported.We thank the Dirección General de Investigación Científica y Técnica (grant No. CTQ2006-15515-CO2-01 and CTQ2007-61185), the Junta de Andalucía (grant P06-FQM-01852 and P07-FQM-2774), la Fundación Ramón Areces for financial support, and Mr M. Rudkowski for performing preliminary experimental work.Peer reviewe
Hexacoordinated Oligosilanes from a Hexacoordinated Silicon(IV) Complex Containing an O,N,N,O Salen-type and Thiocyanato-N Ligands
8 páginas, 4 figuras, 3 esquemas, 1 tabla.Two new neutral hexacoordinated silicon complexes with SiN4O2 (6) and SiN3O2C (7) coordinating frameworks were synthesized by reaction of the O,N,N,O-donor salen-type ligand 1,2-bis[[(2-hydroxy-4-methoxyphenyl)(phenyl)methylene]amino]ethane (H2salen*) with Si(NCS)4 and HMeSi(NCS)2, respectively. The complexes 6 [Si(salen*)(NCS)2] and 7 [Si(salen*)Me(NCS)] were studied in the solid-state by 29Si and 15N CP/MAS NMR and in solution by 1H, 13C, and 29Si insensitive nuclei enhanced by polarization transfer (INEPT) NMR, UV/vis and FT-IR spectroscopy. Elemental analysis and single-crystal X-ray diffraction analysis were used to confirm the composition and structure for compounds 6 and 7. Both complexes contain the dianionic salen-type ligand coordinated in an equatorial fashion to the silicon center, while the axial positions are occupied by two thiocyanato-N ligands for 6 and one thiocyanato-N and one methyl ligand for 7. Complex 6, which contains two Si−NCS functional groups, was used as monomer to produce a mixture of linear oligosilanes with a hexacoordinated silicon backbone (formulated SCN-[Si(salen*)]n-NCS, n = 2−8) 8, via a Wurtz-type coupling reaction. Oligomers 8 were identified by solid-state 29Si cross polarization-magic angle spinning NMR and solution 1H and 29Si NMR spectroscopy, matrix assisted laser desorption ionization-time of flight (MALDI-TOF), gel-permeation chromatography (GPC), FT-IR, UV/vis spectroscopy and thermogravimetric analysis (TGA). Conclusive evidence of the oligomeric nature of 8 was provided by MALDI-TOF spectrometry and was supported by quantitative solution 29Si NMR and GPC studies.Financial
support for this work was provided by the Mexican Department
of Public Education (PROMEP-SEP). G.G.G. thanks
the Mexican National Council for Science and Technology
(Conacyt) for a PhD scholarship.Peer reviewe
Copper-Induced Ammonia N-H Functionalization
The activation of ammonia has been achieved with the aid of the TpMsCu core (TpMs = hydrotris(3-mesityl-pyrazolyl)borate). Complexes of the general composition TpMsCu(amine) (1–4) including the ammonia adduct TpMsCu(NH3) (1) have been synthesized and fully spectroscopical- and structurally characterized. Coordinated ammonia in 1 has been reacted with Ph3CPF6 yielding TpMsCu(NH2CPh3) (5) as a result of N–H cleavage and N–C bond formation. In a parallel manner the catalytic functionalization of ammonia with ethyl diazoacetate leading to glycinate derivatives has been developed with TpMsCu(THF) as the catalyst, in the first example of this transformation with ammonia and a copper-based system.We thank Prof. Kurt Mereiter for helpful discussions. Support for this work was provided by the MINECO (CTQ2014-52769-C3-1-R), and the Junta de Andalucia (P10-FQM-06292). MA thanks MINECO for a FPI fellowship
- …