Method of neutralizing the corrosive surface of amine-cured epoxy resins

The corrosive alkaline surface layer of an epoxy resin product formed by the curing of the epoxy with an aliphatic amine is eliminated by first applying a non-solvent to remove most or all of the free unreacted amine and then applying a layer of a chemical reagent to neutralize the unused amine or amine functional groups by forming a substituted urea. The surface then may be rinsed with acetone and then with alcohol. The non-solvent may be an alcohol. The neutralizing chemical reagent is a mono-isocyanate or a mono-isothiocyanate. Preferred is an aromatic mono-isocyanate such as phenyl isocyanate, nitrophenyl isocyanate and naplthyl isocyanate

Cross-linking of dermal sheep collagen using a water-soluble carbodiimide

A cross-linking method for collagen-based biomaterials was developed using the water-soluble carbodiimide 1-ethyl-3-(3-dimethyl aminopropyl)carbodiimide hydrochloride (EDC). Cross-linking using EDC involves the activation of carboxylic acid groups to give O-acylisourea groups, which form cross-links after reaction with free amine groups. Treatment of dermal sheep collagen (DSC) with EDC (E-DSC) resulted in materials with an increased shrinkage temperature (Ts) and a decreased free amine group content, showing that cross-linking occurred. Addition of N-hydroxysuccinimide to the EDC-containing cross-linking solution (E/N-DSC) increased the rate of cross-linking. Cross-linking increased the Ts of non-cross-linked DSC samples from 56 to 73 °C for E-DSC and to 86 °C for E/N-DSC samples, respectively. For both cross-linking methods a linear relation between the decrease in free amine group content and the increase in Ts was observed. The tensile strength and the high strain modulus of E/N-DSC samples decreased upon cross-linking from 18 to 15MPa and from 26 to 16MPa, respectively. The elongation at break of E/N-DSC increased upon cross-linking from 142 to 180%

Interface Effects on Tunneling Magnetoresistance in Organic Spintronics with Flexible Amine-Au Links

Organic spintronics is a promising emerging field, but the sign of the tunneling magnetoresistance (TMR) is highly sensitive to interface effects, a crucial hindrance to applications. A key breakthrough in molecular electronics was the discovery of amine-Au link groups that give reproducible conductance. Using first principles calculations, we predict that amine-Au links give improved reproducibility in organic spintronics junctions with Au-covered Fe leads. The Au layers allow only states with sp character to tunnel into the molecule, and the flexibility of amine-Au links results in a narrow range of TMR for fixed number of Au layers. Even as the Au thickness changes, TMR remains positive as long as the number of Au layers is the same on both sides of the junction. Since the number of Au layers on Fe surfaces or Fe nanoparticles can now be experimentally controlled, amine-Au links provide a route towards robust TMR in organic spintronics

Chemically modified polysulfones for molecular imprinting. Synthesis and complexation with a fluorescent model template

Polysulfone (PSU) was chemically modified to prepare new molecular imprinted membranes (MIMs). Several amounts of amine and sulfonyl groups were introduced into the PSU chemical structure in order to create interactions with acid or base templates, such as biomolecules or biomacromolecules. A fluorescent dye, Acridine Orange base (AO), was used as a model template and its complexation with the prepared PSUs was monitored by spectroscopic techniques. This study showed an absence of complexation with the native PSU and a strong complexation with the aminated and the sulfonated PSUs. Partially allylated PSU bearing amine or sulfonyl groups were also synthesized. These compounds are expected to be used as precursors for designing new crosslinked molecular imprinting membranes (MIMs), exhibiting high stability of the template memory

Synthesis of biodegradable polyesteramides with pendant functional groups

Morpholine-2,5-dione derivatives having substituents with benzyl-protected carboxylic acid, benzyloxycarbonyl-protected amine and p-methoxy-protected thiol groups, respectively, were prepared in 29-58% yield by cyclization of the corresponding N-[(2RS)-bromopropionyl]-L-amino acids. Polyesteramides with protected pendant functional groups were obtained by ring-opening copolymerization of either ε-caprolactone or DL-lactide with morpholine-2,5-dione derivatives having protected functional substituents. The copolymerizations were carried out in the bulk at 130°C using stannous octoate as an initiator and using low mole fractions (0,05, 0,10 and 0,20) of morpholine-2,5-dione derivatives in the feed. The molecular weight of the resulting copolymers ranged from 1,4 to 8,3 · 104. The ring-opening homopolymerization of morpho-line-2,5-dione derivatives with protected functional substituents was not successful. Polyesteramides with either pendant carboxylic acid groups or pendant amine groups were prepared by catalytic hydrogenation of the corresponding protected copolymers. Treatment of copolymers having pendant p-methoxybenzyl-protected thiol groups with trifluoromethanesulfonic acid resulted not only in the removal of the p-methoxybenzyl group but also in severe degradation of the copolymers, due to acidolysis of main-chain ester bonds

Synthesis of Optically Active Bifunctional Building Blocks through Enantioselective Copper-Catalyzed Allylic Alkylation Using Grignard Reagents

Enantioselective copper-catalyzed allylic alkylations were performed on allylic bromides with a protected hydroxyl or amine functional group using several Grignard reagents and Taniaphos L1 as a ligand. The terminal olefin moiety in the products was transformed into various functional groups without racemization, providing facile access to a variety of versatile bifunctional chiral building blocks.

Structural, Electronic, and Vibrational Properties of Amino-adamantane and Rimantadine Isomers

We performed a first principles total energy investigation on the structural, electronic, and vibrational properties of adamantane molecules, functionalized with amine and ethanamine groups. We computed the vibrational signatures of amantadine and rimantadine isomers with the functional groups bonded to different carbon sites. By comparing our results with recent infrared and Raman spectroscopic data, we discuss the possible presence of different isomers in experimental samples

Method for forming pyrrone molding powders and products of said method

The formation of pyrrone resins of the ladder or semiladder structure is described. The technique involves initial formation of fully cyclized prepolymers having an average degree of polymerization of about 1.5, one with acidic terminal groups, another with amine terminal groups. Thereafter the prepolymers are intimately admixed on a 1:1 stoichiometric basis. The resulting powder mixture is molded at elevated pressures and temperatures to form a fully cyclized resin

Amine functionalization of cholecyst-derived extracellular matrix with generation 1 PAMAM dendrimer

This document is the unedited author's version of a Submitted Work that was subsequently accepted for publication in Biomacromolecules, copyright © American Chemical Society after peer review. To access the final edited and published work, see http://pubs.acs.org/doi/pdf/10.1021/bm701055k.A method to functionalize cholecyst-derived extracellular matrix (CEM) with free amine groups was established in an attempt to improve its potential for tethering of bioactive molecules. CEM was incorporated with Generation-1 polyamidoamine (G1 PAMAM) dendrimer by using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide and N-hydroxysuccinimide cross-linking system. The nature of incorporation of PAMAM dendrimer was evaluated using shrink temperature measurements, Fourier transform infrared (FTIR) assessment, ninhydrin assay, and swellability. The effects of PAMAM incorporation on mechanical and degradation properties of CEM were evaluated using a uniaxial mechanical test and collagenase degradation assay, respectively. Ninhydrin assay and FTIR assessment confirmed the presence of increasing free amine groups with increasing quantity of PAMAM in dendrimer-incorporated CEM (DENCEM) scaffolds. The amount of dendrimer used was found to be critical in controlling scaffold degradation, shrink temperature, and free amine content. Cell culture studies showed that fibroblasts seeded on DENCEM maintained their metabolic activity and ability to proliferate in vitro. In addition, fluorescence cell staining and scanning electron microscopy analysis of cell-seeded DENCEM showed preservation of normal fibroblast morphology and phenotype

Functional poly(2-oxazoline)s by direct amidation of methyl ester side chains

Poly(2-alkyl/aryl-2-oxazoline)s (PAOx) are biocompatible pseudopolypeptides that have received significant interest for biomedical applications in recent years. The growing popularity of PAOx in recent years is driven by its much higher chemical versatility compared with the gold standard in this field, poly(ethylene glycol) (PEG), while having similar beneficial properties, such as stealth behavior and biocompatibility. We further expand the PAOx chemical toolbox by demonstrating a novel straightforward and highly versatile postpolymerization modification platform for the introduction of side-chain functionalities. PAOx having side chain methyl ester functionalities is demonstrated to undergo facile uncatalyzed amidation reactions with a wide range of amines, yielding the corresponding PAOx with side-chain secondary amide groups containing short aliphatic linkers as well as a range of side-chain functionalities including acid, amine, alcohol, hydrazide, and propargyl groups. The PAOx with side-chain methyl ester groups can be prepared by either partial hydrolysis of a PAOx followed by the introduction of the methyl ester via modification of the secondary amine groups with methyl succinyl chloride or by the direct copolymerization of a nonfunctional 2-oxazoline monomer with a 2-methoxycarbonylethyl-2-oxazoline. Thus, this novel synthetic platform enables direct access to a wide range of side-chain functionalities from the same methyl-ester-functionalized poly(2-oxazoline) scaffold