The reactivity of aluminosilicate glasses in cements - effects of Ca content on dissolution characteristics and surface precipitation

Non peer reviewedPostprin

An XPS study of the thermal degradation of polystyrene-clay nanocomposites

X-ray photoelectron spectroscopy, XPS, has been used to examine several polystyrene-clay nanocomposites. The accumulation of oxygen, from the almuniosilicate, on the surface of the polymer was observed, along with the loss of carbon. This confirms that the barrier properties of the clay provide a mechanism by which nanocomposite formation can enhance the fire retardancy of the polymers. No difference is detected depending upon the extent of exfoliation or intercalation of the nanocomposite. #2002 Elsevier Science Ltd. All rights reserved

Development of methods for preparing fly ash for separation by activation

Purpose. Isolation of the aluminosilicate fraction from fly ash, study of physical and mechanical properties of binders obtained from TPP wastes. Methods. Ash, carbon concentrate (underburn), ash concentrate and products of their treatment with reagents were tested by optical methods. The morphology of the particles of the subjects of inquiry was studied with the scanning electron microscope REM-100. The composition of the ash phases was investigated using the X-ray diffractometer DRON-2. Findings. The technology of sorbents based on coal combustion products through a variety of methods was researched. It is shown that these sorbents are distinctive because their structure has non-localized pi-electrons of the graphite-like networks of crystallites of carbon. This circumstance determines not only the uniqueness of electro-physical properties of coal but also adsorption, redox, chemisorption processes on the border of coalslurry. The listed circumstances allow you to use the original methods of chemical and mechanochemical modification of the surface chemical and coal, due to introducing desired donor and acceptor atoms in carbon frame, which increases the absorption capacity and selectivity carbon sorbents. Practical implications. The article presents the results of receipt of binders based on TPP ash. It has been shown that a component of the fly ash is aluminosilicate spheres that can be used in the production of lightweight concrete. It is proved that the result of mechanochemical activation mixture consisting of alumino-silicates, resulting lightweight concrete has high strength 7-8 MPa, which allows, while maintaining the technical characteristics save from 20 to 30 % of binder. Concrete obtained based on aluminosilicate spheres separated from fly ash may be used to prepare the outer wall construction, small building blocks, as well as monolithic housing. In comparison with known compositions keramsit compositions comprising TPP waste

Utilizing Imogolite Nanotubes as a Tunable Catalytic Material for the Selective Isomerization of Glucose to Fructose

The isomerization of glucose to fructose is an important step in the conversion of biomass to valuable fuels and chemicals. A key challenge for the isomerization reaction is achieving high selectivity towards fructose using recyclable and inexpensive catalysts. Imogolite is a single-walled aluminosilicate nanotube characterized by surface areas of 200-400 m2/g and pore widths near 1 nm. In this study, imogolite nanotubes are used as a heterogeneous catalyst for the isomerization of glucose to fructose. Catalytic testing demonstrates the catalytic activity of imogolite for the isomerization of glucose to fructose. Imogolite is a highly tunable structure and can be modified through substitution of Si with Ge or through functionalization of methyl groups to the inner surface. These modifications change the surface properties of the nanotubes and enable tuning of the catalytic performance. Aluminosilicate imogolite is the most active material for the conversion of glucose. Conversion of glucose of 30% and selectivity for fructose of 45% is achieved using aluminosilicate imogolite. Modification of imogolite with germanium or methyl groups decreases the conversion, but increases the selectivity. Generally, the selectivity for fructose decreases as the conversion of glucose increases. Interestingly, the imogolite nanotubes have comparable catalytic selectivity at similar conversion as base catalyzed reactions. Catalyst recycling experiments revealed that organic content accumulates on the nanotubes that results in a minor reduction in conversion while maintaining similar catalytic selectivity. Overall, imogolite nanotubes demonstrate an active and tunable catalytic platform for the isomerization of glucose to fructose.American Chemical Society Petroleum Research Fund (ACS-PRF 55946-DNI5)National Science Foundation (NSF CBET 1605037; 1653587 and NSF CBET REU 1645126)Ohio State University Institute of Materials Research (OSU IMR FG0138)The Undergraduate Research Office and Office of ResearchA one-year embargo was granted for this item.Academic Major: Chemical Engineerin

Water solubility in aluminosilicate melts of haplogranite composition at 2 kbar

The compositional dependence of H2O solubility was investigated at 2 kbar and 800°C in haplogranite melts (system SiO2---1bNaAlSi3O8---1bKAlSi3O8 or Qz---1bAb---1bOr). The sixteen investigated compositions contained 25, 35 or 45 wt.% normative Qz and various Ab/(Ab+Or) ratios (0.15–0.92). Starting solid materials were anhydrous bubble-free glasses to which 10 wt.% H2O was added. The H2O contents of the isobarically quenched melts (glasses) were measured by Karl-Fischer titration. The results show that H2O solubility in aluminosilicate melts depends significantly upon anhydrous composition. The highest solubility values are obtained for the most Ab-rich melts. At a constant normative quartz content, the solubility of water decreases from 6.49 ± 0.20 wt.% H2O for a composition Qz35Ab60Or05 (normative composition expressed in wt.%) to 5.50 ± 0.15 wt.% H2O for a composition Qz35Ab10Or55. Along this join, the most significant changes are observed for Ab-rich melts whereas H2O solubility in Or-rich melts remains almost constant. The H2O solubility data imply that H2O is preferentially associated with the Ab component in aluminosilicate melts. Application of the results to natural granitic melts suggests that Na-rich, H2O-saturated melts may be significantly less viscous than H2O-saturated, K-rich melts. The temperature dependence of H2O solubility, investigated for composition Qz28Ab38Or34 at 2 kbar, is low. Increasing temperature from 750° to 1150°C only causes a decrease in H2O solubility from 6.00 to 5.41 wt.% H2O. These data are in agreement with previous data obtained for albite melts

Fracture Toughness of Silicate Glasses: Insights from Molecular Dynamics Simulations

Understanding, predicting and eventually improving the resistance to fracture of silicate materials is of primary importance to design new glasses that would be tougher, while retaining their transparency. However, the atomic mechanism of the fracture in amorphous silicate materials is still a topic of debate. In particular, there is some controversy about the existence of ductility at the nano-scale during the crack propagation. Here, we present simulations of the fracture of three archetypical silicate glasses using molecular dynamics. We show that the methodology that is used provide realistic values of fracture energy and toughness. In addition, the simulations clearly suggest that silicate glasses can show different degrees of ductility, depending on their composition.Comment: arXiv admin note: text overlap with arXiv:1410.291

Simultaneous aluminum, silicon, and sodium coordination changes in 6 GPa sodium aluminosilicate glasses

We present the first direct observation of high-coordinated Si and Al occurring together in a series of high-pressure sodium aluminosilicate glasses, quenched from melts at 6 GPa. Using ^(29)Si MAS NMR, we observe that a small amount of Al does not have a significant effect on the amount of ^VSi or ^(VI)Si generated, but that larger Al concentrations lead to a gradual decrease in both these species. ^(27)Al MAS NMR spectra show that samples with small amounts of Al have extremely high mean Al coordination values of up to 5.49, but that larger Al concentrations cause a gradual decrease in both ^VAl and ^(VI)Al. Although mean Al and Si coordination numbers both decrease with increasing Al contents, the weighted combined (Al+Si) coordination number increases. Silicon and Al resonances shift in frequency with increasing pressure or changing Al concentration, indicating additional structural changes, including compression of network bond angles. Increases in the ^(23)Na isotropic chemical shifts indicate decreases in the mean Na-O bond lengths with increasing pressure, which are more dramatic at higher Al contents. Recovered glass densities are about 10 to 15% greater than those of similar ambient pressure samples. However, the density increases due to the combined coordination changes of Al and Si are estimated to total only about 1 to 2%, and are roughly constant with composition despite the large effects of Al content on the individual coordinations of the two cations. Thus, effects of other structural changes must be significant to the overall densification. Apparent equilibrium constants for reactions involving the generation of high-coordinated species show systematic behavior, which suggests an internal consistency to the observed Si and Al coordination number shifts

Fibrous refractory composite insulation

A refractory composite insulating material was prepared from silica fibers and aluminosilicate fibers in a weight ratio ranging from 1:19 to 19:1, and about 0.5 to 30% boron oxide, based on the total fiber weight. The aluminosilicate fiber and boron oxide requirements may be satisfied by using aluminoborosilicate fibers and, in such instances, additional free boron oxide may be incorporated in the mix up to the 30% limit. Small quantities of refractory opacifiers, such as silicon carbide, may be also added. The composites just described are characterized by the absence of a nonfibrous matrix