Depth sensitive sampling of implanted species in Genesis Collectors using UV laser ablation and SIMS

SIMS profiling of laser abalation pits in CVD diamond implanted with oxygen- 18 shows that homogenised 193nm excimer laser beam can successfully ablate a layer a few nm thick, removing surface contamination without signicant loss of implanted sample

Deciphering the Origin of the Regular Satellites of Gaseous Giants - Iapetus: the Rosetta Ice-Moon

Here we show that Iapetus can serve to discriminate between satellite formation models. Its accretion history can be understood in terms of a two-component gaseous subnebula, with a relatively dense inner region, and an extended tail out to the location of the irregular satellites, as in the SEMM model of Mosqueira and Estrada (2003a,b). Following giant planet formation, planetesimals in the feeding zone of Jupiter and Saturn become dynamically excited, and undergo a collisional cascade. Ablation and capture of planetesimal fragments crossing the gaseous circumplanetary disks delivers enough collisional rubble to account for the mass budgets of the regular satellites of Jupiter and Saturn. This process can result in rock/ice fractionation provided the make up of the population of disk crossers is non-homogeneous, thus offering a natural explanation for the marked compositional differences between outer solar nebula objects and those that accreted in the subnebulae of the giant planets. Consequently, our model leads to an enhancement of the ice content of Iapetus, and to a lesser degree those of Ganymede, Titan and Callisto, and accounts for the (non-stochastic) compositions of these large, low-porosity outer regular satellites of Jupiter and Saturn. (abridged)Comment: 33 pages, 7 figures, 2 tables, Accepted for publication to Icaru

Dust Ablation on the Giant Planets: Consequences for Stratospheric Photochemistry

Ablation of interplanetary dust supplies oxygen to the upper atmospheres of Jupiter, Saturn, Uranus, and Neptune. Using recent dynamical model predictions for the dust influx rates to the giant planets (Poppe, A.R.~et al.~[2016], Icarus 264, 369), we calculate the ablation profiles and investigate the subsequent coupled oxygen-hydrocarbon neutral photochemistry in the stratospheres of these planets. We find that dust grains from the Edgeworth-Kuiper Belt, Jupiter-family comets, and Oort-cloud comets supply an effective oxygen influx rate of 1.0$^{+2.2}_{-0.7} \, \times \, 10^7$ O atoms cm$^{-2}$ s$^{-1}$ to Jupiter, 7.4$^{+16}_{-5.1} \, \times 10^4$ cm$^{-2}$ s$^{-1}$ to Saturn, 8.9$^{+19}_{-6.1} \, \times \, 10^4$ cm$^{-2}$ s$^{-1}$ to Uranus, and 7.5$^{+16}_{-5.1} \, \times \, 10^5$ cm$^{-2}$ s$^{-1}$ to Neptune. The fate of the ablated oxygen depends in part on the molecular/atomic form of the initially delivered products, and on the altitude at which it was deposited. The dominant stratospheric products are CO, H$_2$O, and CO$_2$, which are relatively stable photochemically. Model-data comparisons suggest that interplanetary dust grains deliver an important component of the external oxygen to Jupiter and Uranus but fall far short of the amount needed to explain the CO abundance currently seen in the middle stratospheres of Saturn and Neptune. Our results are consistent with the theory that all of the giant planets have experienced large cometary impacts within the last few hundred years. Our results also suggest that the low background H$_2$O abundance in Jupiter's stratosphere is indicative of effective conversion of meteoric oxygen to CO during or immediately after the ablation process -- photochemistry alone cannot efficiently convert the H$_2$O into CO on the giant planets.Comment: accepted in Icaru

Study of femtosecond laser beam focusing in a direct-write system

En col·laboració amb la Universitat Autònoma de Barcelona (UAB) i la Universitat de Barcelona (UB).Direct-write techniques appear as a versatile option in rapid-prototyping applications because they can directly transfer a custom pattern from a digital file. Lasers are a distinguished tool which allow to perform non-contact direct-write techniques with the ability to add, remove and modify different types of materials. Moreover, they have a high focusing power and offer high spatial resolution when a femtosecond laser is used due to the reduction of thermal effects. Additive and subtractive techniques can be performed in one laser-based direct-write system with minimum variations in the setup. In all cases, properties of the laser beam, such as the beam width or the morphology of the intensity distribution have an effect on the results of the laser processing. The aim of this work is the study of the laser propagation in a specific laser-based direct-write setup. The beam intensity distribution effects are measured at different positions and compared with simulations. The influence of the main parameters, pupil displacement and objective tilt, on the morphological properties of the intensity distribution is analysed. Well defined spots with good reproducibility are obtained. In addition, at comparing the simulation with the experiments, the origin of some morphological properties are reported and they can be used to optimize the setup

Patterning of the C. elegans 1° vulval lineage by RAS and Wnt pathways

In C. elegans, the descendants of the 1° vulval precursor cell (VPC) establish a fixed spatial pattern of two different cell fates: E-F-F-E. The two inner granddaughters attach to the somatic gonadal anchor cell (AC) and generate four vulF cells, while the two outer granddaughters produce four vulE progeny. zmp-1::GFP, a molecular marker that distinguishes these two fates, is expressed in vulE cells, but not vulF cells. We demonstrate that a short-range AC signal is required to ensure that the pattern of vulE and vulF fates is properly established. In addition, signaling between the inner and outer 1° VPC descendants, as well as intrinsic polarity of the 1° VPC daughters, is involved in the asymmetric divisions of the 1° VPC daughters and the proper orientation of the outcome. Finally, we provide evidence that RAS signaling is used during this new AC signaling event, while the Wnt receptor LIN-17 appears to mediate signaling between the inner and outer 1° VPC descendants

Single exponential decay waveform; a synergistic combination of electroporation and electrolysis (E2) for tissue ablation.

BackgroundElectrolytic ablation and electroporation based ablation are minimally invasive, non-thermal surgical technologies that employ electrical currents and electric fields to ablate undesirable cells in a volume of tissue. In this study, we explore the attributes of a new tissue ablation technology that simultaneously delivers a synergistic combination of electroporation and electrolysis (E2).MethodA new device that delivers a controlled dose of electroporation field and electrolysis currents in the form of a single exponential decay waveform (EDW) was applied to the pig liver, and the effect of various parameters on the extent of tissue ablation was examined with histology.ResultsHistological analysis shows that E2 delivered as EDW can produce tissue ablation in volumes of clinical significance, using electrical and temporal parameters which, if used in electroporation or electrolysis separately, cannot ablate the tissue.DiscussionThe E2 combination has advantages over the three basic technologies of non-thermal ablation: electrolytic ablation, electrochemical ablation (reversible electroporation with injection of drugs) and irreversible electroporation. E2 ablates clinically relevant volumes of tissue in a shorter period of time than electrolysis and electroporation, without the need to inject drugs as in reversible electroporation or use paralyzing anesthesia as in irreversible electroporation

Flexible delivery of Er:YAG radiation at 2.94 µm with negative curvature silica glass fibers:a new solution for minimally invasive surgical procedures

We present the delivery of high energy microsecond pulses through a hollow-core negative-curvature fiber at 2.94 µm. The energy densities delivered far exceed those required for biological tissue manipulation and are of the order of 2300 J/cm(2). Tissue ablation was demonstrated on hard and soft tissue in dry and aqueous conditions with no detrimental effects to the fiber or catastrophic damage to the end facets. The energy is guided in a well confined single mode allowing for a small and controllable focused spot delivered flexibly to the point of operation. Hence, a mechanically and chemically robust alternative to the existing Er:YAG delivery systems is proposed which paves the way for new routes for minimally invasive surgical laser procedures