QUALITY-DRIVEN CROSS LAYER DESIGN FOR MULTIMEDIA SECURITY OVER RESOURCE CONSTRAINED WIRELESS SENSOR NETWORKS

The strong need for security guarantee, e.g., integrity and authenticity, as well as privacy and confidentiality in wireless multimedia services has driven the development of an emerging research area in low cost Wireless Multimedia Sensor Networks (WMSNs). Unfortunately, those conventional encryption and authentication techniques cannot be applied directly to WMSNs due to inborn challenges such as extremely limited energy, computing and bandwidth resources. This dissertation provides a quality-driven security design and resource allocation framework for WMSNs. The contribution of this dissertation bridges the inter-disciplinary research gap between high layer multimedia signal processing and low layer computer networking. It formulates the generic problem of quality-driven multimedia resource allocation in WMSNs and proposes a cross layer solution. The fundamental methodologies of multimedia selective encryption and stream authentication, and their application to digital image or video compression standards are presented. New multimedia selective encryption and stream authentication schemes are proposed at application layer, which significantly reduces encryption/authentication complexity. In addition, network resource allocation methodologies at low layers are extensively studied. An unequal error protection-based network resource allocation scheme is proposed to achieve the best effort media quality with integrity and energy efficiency guarantee. Performance evaluation results show that this cross layer framework achieves considerable energy-quality-security gain by jointly designing multimedia selective encryption/multimedia stream authentication and communication resource allocation

ReSCon '11, Research Student Conference: Book of Abstracts

The fourth SED Research Student Conference (ReSCon2011) was hosted over three days, 20-22 June 2011, in the Hamilton Centre at Brunel University. The conference consisted of technical presentations, a poster session and social events. which focused on current research being conducted within the School of Engineering and Design by postgraduate research students from the School. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

Facial feature representation and recognition

Facial expression provides an important behavioral measure for studies of emotion, cognitive processes, and social interaction. Facial expression representation and recognition have become a promising research area during recent years. Its applications include human-computer interfaces, human emotion analysis, and medical care and cure. In this dissertation, the fundamental techniques will be first reviewed, and the developments of the novel algorithms and theorems will be presented later. The objective of the proposed algorithm is to provide a reliable, fast, and integrated procedure to recognize either seven prototypical, emotion-specified expressions (e.g., happy, neutral, angry, disgust, fear, sad, and surprise in JAFFE database) or the action units in CohnKanade AU-coded facial expression image database. A new application area developed by the Infant COPE project is the recognition of neonatal facial expressions of pain (e.g., air puff, cry, friction, pain, and rest in Infant COPE database). It has been reported in medical literature that health care professionals have difficulty in distinguishing newborn\u27s facial expressions of pain from facial reactions of other stimuli. Since pain is a major indicator of medical problems and the quality of patient care depends on the quality of pain management, it is vital that the methods to be developed should accurately distinguish an infant\u27s signal of pain from a host of minor distress signal. The evaluation protocol used in the Infant COPE project considers two conditions: person-dependent and person-independent. The person-dependent means that some data of a subject are used for training and other data of the subject for testing. The person-independent means that the data of all subjects except one are used for training and this left-out one subject is used for testing. In this dissertation, both evaluation protocols are experimented. The Infant COPE research of neonatal pain classification is a first attempt at applying the state-of-the-art face recognition technologies to actual medical problems. The objective of Infant COPE project is to bypass these observational problems by developing a machine classification system to diagnose neonatal facial expressions of pain. Since assessment of pain by machine is based on pixel states, a machine classification system of pain will remain objective and will exploit the full spectrum of information available in a neonate\u27s facial expressions. Furthermore, it will be capable of monitoring neonate\u27s facial expressions when he/she is left unattended. Experimental results using the Infant COPE database and evaluation protocols indicate that the application of face classification techniques in pain assessment and management is a promising area of investigation. One of the challenging problems for building an automatic facial expression recognition system is how to automatically locate the principal facial parts since most existing algorithms capture the necessary face parts by cropping images manually. In this dissertation, two systems are developed to detect facial features, especially for eyes. The purpose is to develop a fast and reliable system to detect facial features automatically and correctly. By combining the proposed facial feature detection, the facial expression and neonatal pain recognition systems can be robust and efficient

Automated Detection and Counting of Pedestrians on an Urban Roadside

This thesis implements an automated system that counts pedestrians with 85% accuracy. Two approaches have been considered and evaluated in terms of count accuracy, cost and ease of deployment. The first approach employs the Autoscope Solo Terra, a traffic camera which is widely used to monitor vehicular traffic. The Solo Terra supports an image processing-based detector that counts the number of objects crossing user-defined areas in the captured image. The count is updated based on the amount of movement across the selected regions. Therefore, a second approach has been considered that uses a histogram of oriented gradients (HoG), an advanced vision based algorithm proposed by Dalal et al. which distinguishes a pedestrian from a non-pedestrian based on an omega shape formed by the head and shoulders of a human being. The implemented detection software processes video frames that are streamed from a low-cost digital camera. The frames are divided into sub-regions which are scanned for an omega shape whenever movement is detected in those regions. It has been found that the HoG-based approach degrades in performance due to occlusion under dense pedestrian traffic conditions whereas the Solo Terra approach appears to be more robust. Undercounts and overcounts were encountered using the Solo Terra approach. To combat the disadvantages of both the approaches, they were integrated to form a single system where count is incremented predominantly using the Solo Terra. The HoG-based approach corrects the obtained count under certain conditions. A preliminary prototype of the integrated system has been verified

An investigation into the design of a satellite based stereo imaging sensor and the use of automatic image matching in the production of digital elevation models

Bibliography: leaves 106-110.Two problems are addressed in this dissertation. They are the design of a micro-satellite based stereo imaging sensor and the automatic matching of digital stereo images for automatic cartography applications. The two problems are related; they are both components of a stereo vision system. The research was initially motivated by the decision of the Department of Electrical and Electronic Engineering of the University of Stellenbosch to develop and build an experimental micro-satellite, SUNSAT. The proposed payload included a high resolution multi-spectral stereo imaging sensor. The second problem was motivated by the desire to use an automatic matching system to process the images produced by the sensor. The investigation, into the sensor design, was divided into two parts. The first part investigated the feasibility of the sensor and the second part dealt with the development of a design specification. The investigation, into automatic matching, dealt with the degree to which a set of requirements could be met. These requirements relate to the accuracy, reliability, generality, predictability and complexity of the matching system. The effect of scene characteristics was also investigated. The results showed that it is possible to build a micro-satellite based stereo imaging sensor. The recommended sensor design included three spectral bands, an 8 bit analogue-to-digital converter and a focal length of 535 mm. Furthermore, it was found that a sub-pixel accuracy matching requirement can be met and that a matching reliability of 89.6 can be achieved. Finally, it was found that the best matching results are obtained in areas of high image variance and low disparity variance

Fuzzy Logic

The capability of Fuzzy Logic in the development of emerging technologies is introduced in this book. The book consists of sixteen chapters showing various applications in the field of Bioinformatics, Health, Security, Communications, Transportations, Financial Management, Energy and Environment Systems. This book is a major reference source for all those concerned with applied intelligent systems. The intended readers are researchers, engineers, medical practitioners, and graduate students interested in fuzzy logic systems

Distortion Robust Biometric Recognition

abstract: Information forensics and security have come a long way in just a few years thanks to the recent advances in biometric recognition. The main challenge remains a proper design of a biometric modality that can be resilient to unconstrained conditions, such as quality distortions. This work presents a solution to face and ear recognition under unconstrained visual variations, with a main focus on recognition in the presence of blur, occlusion and additive noise distortions. First, the dissertation addresses the problem of scene variations in the presence of blur, occlusion and additive noise distortions resulting from capture, processing and transmission. Despite their excellent performance, ’deep’ methods are susceptible to visual distortions, which significantly reduce their performance. Sparse representations, on the other hand, have shown huge potential capabilities in handling problems, such as occlusion and corruption. In this work, an augmented SRC (ASRC) framework is presented to improve the performance of the Spare Representation Classifier (SRC) in the presence of blur, additive noise and block occlusion, while preserving its robustness to scene dependent variations. Different feature types are considered in the performance evaluation including image raw pixels, HoG and deep learning VGG-Face. The proposed ASRC framework is shown to outperform the conventional SRC in terms of recognition accuracy, in addition to other existing sparse-based methods and blur invariant methods at medium to high levels of distortion, when particularly used with discriminative features. In order to assess the quality of features in improving both the sparsity of the representation and the classification accuracy, a feature sparse coding and classification index (FSCCI) is proposed and used for feature ranking and selection within both the SRC and ASRC frameworks. The second part of the dissertation presents a method for unconstrained ear recognition using deep learning features. The unconstrained ear recognition is performed using transfer learning with deep neural networks (DNNs) as a feature extractor followed by a shallow classifier. Data augmentation is used to improve the recognition performance by augmenting the training dataset with image transformations. The recognition performance of the feature extraction models is compared with an ensemble of fine-tuned networks. The results show that, in the case where long training time is not desirable or a large amount of data is not available, the features from pre-trained DNNs can be used with a shallow classifier to give a comparable recognition accuracy to the fine-tuned networks.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201