Simultaneous Multithreading and Hard Real Time: Can It Be Safe?

The applicability of Simultaneous Multithreading (SMT) to real-time systems has been hampered by the difficulty of obtaining reliable execution costs in an SMT-enabled system. This problem is addressed by introducing a scheduling framework, called CERT-MT, that combines scheduling-aware timing analysis with a cyclic-executive scheduler in a way that minimizes SMT-related timing variations. The proposed scheduling-aware timing analysis is based on maximum observed execution times and accounts for the uncertainty inherent in measurement-based timing analysis. The timing analysis is found to work for tasks with and without SMT, though some adjustments are required in the former case. A large-scale schedulability study is presented that shows CERT-MT can schedule systems with total utilizations approaching 1.4 times the core count, without sacrificing safety

GRIDCC: Real-time workflow system

The Grid is a concept which allows the sharing of resources between distributed communities, allowing each to progress towards potentially different goals. As adoption of the Grid increases so are the activities that people wish to conduct through it. The GRIDCC project is a European Union funded project addressing the issues of integrating instruments into the Grid. This increases the requirement of workflows and Quality of Service upon these workflows as many of these instruments have real-time requirements. In this paper we present the workflow management service within the GRIDCC project which is tasked with optimising the workflows and ensuring that they meet the pre-defined QoS requirements specified upon them

Elastic DVS Management in Processors with Discrete Voltage/Frequency Modes

Applying classical dynamic voltage scaling (DVS) techniques to real-time systems running on processors with discrete voltage/frequency modes causes a waste of computational resources. In fact, whenever the ideal speed level computed by the DVS algorithm is not available in the system, to guarantee the feasibility of the task set, the processor speed must be set to the nearest level greater than the optimal one, thus underutilizing the system. Whenever the task set allows a certain degree of flexibility in specifying timing constraints, rate adaptation techniques can be adopted to balance performance (which is a function of task rates) versus energy consumption (which is a function of the processor speed). In this paper, we propose a new method that combines discrete DVS management with elastic scheduling to fully exploit the available computational resources. Depending on the application requirements, the algorithm can be set to improve performance or reduce energy consumption, so enhancing the flexibility of the system. A reclaiming mechanism is also used to take advantage of early completions. To make the proposed approach usable in real-world applications, the task model is enhanced to consider some of the real CPU characteristics, such as discrete voltage/frequency levels, switching overhead, task execution times nonlinear with the frequency, and tasks with different power consumption. Implementation issues and experimental results for the proposed algorithm are also discussed

Dynamic voltage scaling algorithms for soft and hard real-time system

Dynamic Voltage Scaling (DVS) has not been investigated completely for further minimizing the energy consumption of microprocessor and prolonging the operational life of real-time systems. In this dissertation, the workload prediction based DVS and the offline convex optimization based DVS for soft and hard real-time systems are investigated, respectively. The proposed algorithms of soft and hard real-time systems are implemented on a small scaled wireless sensor network (WSN) and a simulation model, respectively

CleanET: enabling timing validation for complex automotive systems

Timing validation for automotive systems occurs in late integration stages when it is hard to control how the instances of software tasks overlap in time. To make things worse, in complex software systems, like those for autonomous driving, tasks schedule has a strong event-driven nature, which further complicates relating those task-overlapping scenarios (TOS) captured during the software timing budgeting and those observed during validation phases. This paper proposes CleanET, an approach to derive the dilation factor r caused due to the simultaneous execution of multiple tasks. To that end, CleanET builds on the captured TOS during testing and predicts how tasks execution time react under untested TOS (e.g. full overlap), hence acting as a mean of robust testing. CleanET also provides additional evidence for certification about the derived timing budgets for every task. We apply CleanET to a commercial autonomous driving framework, Apollo, where task measurements can only be reasonably collected under 'arbitrary' TOS. Our results show that CleanET successfully derives the dilation factor and allows assessing whether execution times for the different tasks adhere to their respective deadlines for unobserved scenarios.This work has been partially supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under grant TIN2015- 65316-P, the SuPerCom European Research Council (ERC) project under the European Union’s Horizon 2020 research and innovation programme (grant agreement No. 772773), and the HiPEAC Network of Excellence. MINECO partially supported Jaume Abella under Ramon y Cajal postdoctoral fellowship (RYC-2013-14717).Peer ReviewedPostprint (author's final draft

Study of the Reliability of Statistical Timing Analysis for Real-Time Systems

Presented at 23rd International Conference on Real-Time Networks and Systems (RTNS 2015). 4 to 6, Nov, 2015, Main Track. Lille, France.Probabilistic and statistical temporal analyses have been developedas a means of determining the worst-case execution and responsetimes of real-time software for decades. A number of such methodshave been proposed in the literature, of which the majority claim tobe able to provide worst-case timing scenarios with respect to agiven likelihood of a certain value being exceeded. Further, suchclaims are based on either some estimates associated with a probability,or probability distributions with a certain level of confidence.However, the validity of the claims are very much dependent on anumber of factors, such as the achieved samples and the adopteddistributions for analysis.In this paper, we investigate whether the claims made are in facttrue as well as the establishing an understanding of the factors thataffect the validity of these claims. The results are of importancefor two reasons: to allow researchers to examine whether there areimportant issues that mean their techniques need to be refined; andso that practitioners, including industrialists who are currently usingcommercial timing analysis tools based on these types of techniques,understand how the techniques should be used to ensure theresults are fit for their purposes

Concurrency Platforms for Real-Time and Cyber-Physical Systems

Parallel processing is an important way to satisfy the increasingly demanding computational needs of modern real-time and cyber-physical systems, but existing parallel computing technologies primarily emphasize high-throughput and average-case performance metrics, which are largely unsuitable for direct application to real-time, safety-critical contexts. This work contrasts two concurrency platforms designed to achieve predictable worst case parallel performance for soft real-time workloads with millisecond periods and higher. One of these is then the basis for the CyberMech platform, which enables parallel real-time computing for a novel yet representative application called Real-Time Hybrid Simulation (RTHS). RTHS combines demanding parallel real-time computation with real-time simulation and control in an earthquake engineering laboratory environment, and results concerning RTHS characterize a reasonably comprehensive survey of parallel real-time computing in the static context, where the size, shape, timing constraints, and computational requirements of workloads are fixed prior to system runtime. Collectively, these contributions constitute the first published implementations and evaluations of general-purpose concurrency platforms for real-time and cyber-physical systems, explore two fundamentally different design spaces for such systems, and successfully demonstrate the utility and tradeoffs of parallel computing for statically determined real-time and cyber-physical systems

A Power-Efficient Methodology for Mapping Applications on Multi-Processor System-on-Chip Architectures

This work introduces an application mapping methodology and case study for multi-processor on-chip architectures. Starting from the description of an application in standard sequential code (e.g. in C), first the application is profiled, parallelized when possible, then its components are moved to hardware implementation when necessary to satisfy performance and power constraints. After mapping, with the use of hardware objects to handle concurrency, the application power consumption can be further optimized by a task-based scheduler for the remaining software part, without the need for operating system support. The key contributions of this work are: a methodology for high-level hardware/software partitioning that allows the designer to use the same code for both hardware and software models for simulation, providing nevertheless preliminary estimations for timing and power consumption; and a task-based scheduling algorithm that does not require operating system support. The methodology has been applied to the co-exploration of an industrial case study: an MPEG4 VGA real-time encoder