2008 Index IEEE Transactions on Control Systems Technology Vol. 16

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

2009 Index IEEE Antennas and Wireless Propagation Letters Vol. 8

This index covers all technical items - papers, correspondence, reviews, etc. - that appeared in this periodical during the year, and items from previous years that were commented upon or corrected in this year. Departments and other items may also be covered if they have been judged to have archival value. The Author Index contains the primary entry for each item, listed under the first author\u27s name. The primary entry includes the coauthors\u27 names, the title of the paper or other item, and its location, specified by the publication abbreviation, year, month, and inclusive pagination. The Subject Index contains entries describing the item under all appropriate subject headings, plus the first author\u27s name, the publication abbreviation, month, and year, and inclusive pages. Note that the item title is found only under the primary entry in the Author Index

Design of Tunable Beamforming Networks Using Metallic Ridge Gap Waveguide Technology

Wireless communication is a leap of development in the history of humanity. For the past 100 years, a considerable effort has been spent to develop better standards, and technologies for a higher speed wireless communication with high system capacity for different applications. This requires the design of a high-frequency, point-to-multipoint antenna array system to achieve the mentioned goals. In addition, the reconfigurability of this antenna system is essential to change the system characteristics to achieve acceptable performance in different situations. The main goal of this thesis is to design a reconfigurable beamforming network to work on the Ka-band for waveguide applications. Among different beamforming networks in the literature, the Butler matrix is chosen due to its higher efficiency and the smaller number of components required than other beamforming networks. The Butler matrix is designed using a dual-plane topology to avoid using crossovers. Ridge gap waveguide technology is chosen among different transmission lines to implement the Butler matrix for several reasons: It does not need dielectrics to operate, so its power handling capacity is defined by the gap height, and it has no dielectric losses. Its zero-field region represents the operating principle for some tunable devices introduced here and its contactless nature, which eases the assembly of waveguide parts at the millimeter-wave frequencies. The reconfigurability of the Butler matrix is implemented such that beamwidth, maximum gain, and beam direction may be all tuned for optimum system performance. To that end, several components are designed to achieve the required target, and strict requirements are placed on several components to achieve an acceptable cascaded-system performance. These components include a ridge gap waveguide 90o-hybrid working over a more than 30% bandwidth, which can provide several coupling levels ranging from 3 dB to 33 dB and a return loss and isolation better than 30 dB. Another component is a wideband reconfigurable power splitter that has a 40% bandwidth, a return loss better than 20 dB in the worst case and the ability to achieve all power splitting ratios including switching between the two guides. In addition, a wideband reconfigurable phase shifter is designed to have 33% bandwidth and phase shift tuning range from 0o to 200o. Two coaxial-to-ridge gap waveguide transitions are designed to work over a more than 100% bandwidth to facilitate testing different ridge gap waveguide components. Analysis of the asymmetric double ridge waveguide is introduced where its impedance is deduced and may be used to design a single to double ridge waveguide transition useful for the dual-plane Butler matrix introduced here. In addition, this concept is used to develop a wideband unequal power divider in the single ridge waveguide technology. At the end, the whole system is assembled to show its performance in different tuning states. The ability of the system to produce radiation patterns of different characteristics is demonstrated. The presented Butler matrix design is a promising beamforming network for several applications like radar, base stations for mobile communications, and satellite applications

Innovative Microwave and Millimetre-Wave Components and Sub-Systems Based on Substrate Integration Technology

RÉSUMÉ Avec le rapide développement des technologies microondes et millimétriques, les spécifications de conception des circuits et systèmes sont de plus en plus exigeantes. La tendance pour le développement des systèmes de communication se dirige vers un poids minimisé, une taille réduite, de multiples fonctions, une fiabilité accrue et un faible coût. Ainsi, des technologies microondes et millimétriques faibles coûts, performantes et convenant à une production de masse sont critiques pour développer avec succès des systèmes commerciaux. La technologie à guide d’ondes rectangulaire a toujours été parmi les plus populaires pour la fabrication des systèmes millimétriques. Cependant, une difficulté majeure est reliée à leur intégration avec des composants actifs et les autres types de lignes de transmission conventionnelles, telle que microruban ou coplanaire… Les technologies de Circuits Intégrés au Substrat (CISs), incluant la technologie Guide Intégré au Substrat (GIS), qui peut être intégrée dans les substrats diélectriques avec de faibles pertes d’insertion et de radiation, sont une famille de nouvelles structures à ondes guidées. Ces dernières permettent de faire un pont entre les structures planaires et non-planaires. Jusqu’à maintenant, les composants et les sous-systèmes micro-ondes basés sur la technologie GIS ont été largement étudiés et développés. Dans cette thèse, nous étudions d’avantage la technologie GIS afin de proposer et développer divers composants actif et passif micro-ondes et millimétriques innovant et originaux. Ces structures de composants innovants peuvent améliorer l’intégration entre les composants GIS et les autres composants planaires. Ainsi, un certain nombre de structures et composants sont proposés et appliqués dans la conception et la démonstration d’un réseau d’antennes intégré en ondes millimétriques et un sous-système d’antennes intelligentes à 60 GHz. Il est à noter que plusieurs composants étudiés dans ce travail ont été proposés et démontrés à des fréquences micro-ondes plus basses afin de faire une preuve de concept en permettant une fabrication facile des structures et des circuits. Ces circuits en basses fréquences peuvent facilement être adaptés pour des applications aux fréquences plus hautes.---------- ABSTRACT The tendency of modern microwave and millimetre-wave communication system development is towards small size, light weight, reliable, multifunctional and low-cost. Moreover, low-cost, mass producible, high-performance and high-yield microwave and millimetre wave technologies are crucial for developing successful commercial microwave and millimetre wave systems. Rectangular waveguide has always been among the most popular choices for the making of millimetre-wave circuits and systems. A major challenge, however, is related to its integration with active devices and other conventional planar transmission lines, such as microstrip or coplanar waveguide (CPW), etc. Substrate Integrated Circuits (SICs) techniques including substrate integrated waveguide (SIW), which can be integrated in planar dielectric substrate with low insertion loss, high Q and low radiation loss, present a family of novel guided wave structures. This scheme provides a bridge between planar and non-planar structures. Up to now, microwave components and sub-systems based on SIW technology have been widely studied and developed. In this thesis, we take a further study of SIW technology to propose and develop various innovative and original microwave and millimetre-wave passive and active components. These innovative component structures can improve the integration between SIW components and other planar components. Then, a certain number of proposed structures or components are applied in the design and demonstration of millimetre-wave integrated antenna arrays and 60 GHz smart antenna sub-system. Note that many components studied in this work were proposed and demonstrated at different lower microwave frequencies for the proof of concept purpose with easy-to-fabricate structures and circuits. Those low-frequency circuits can easily be scaled up for high-frequency applications

Design and Validation of Microstrip Gap Waveguides and Their Transitions to Rectangular Waveguide, for Millimeter-Wave Applications

The paper describes the design methodology, experimental validation and practical considerations of two millimeterwave wideband vertical transitions from two gap waveguide versions (inverted microstrip gap waveguide, and microstrip packaged by using gap waveguide) to standard WR-15 rectangular waveguide. The experimental results show S11 smaller than -10 dB over relative bandwidths larger than 25% and 26.6% when Rogers RO3003 and RO4003 materials are used respectively. The vertical transition from standard microstrip line packaged by a lid of pins to WR-15, shows measured return loss better than 15 dB over 13.8% relative bandwidth. The new transitions can be used as interfaces between gap waveguide feed-networks for 60 GHz antenna systems, testing equipment (like Vector Network Analyzers) and components with WR-15 ports, such as transmitting/receiving amplifiers. Moreover, the paper documents the losses of different gap waveguide prototypes compared to unpackaged microstrip line and Substrate Integrated Waveguide (SIW). This investigation shows that in V-band the lowest losses are achieved with inverted microstrip gap waveguide

An Overview of Recent Development of the Gap-Waveguide Technology for mmWave and Sub-THz Applications

The millimeter-wave (mmWave) and sub-terahertz (sub-THz) bands have received much attention in recent years for wireless communication and high-resolution imaging radar applications. The objective of this paper is to provide an overview of recent developments in the design and technical implementation of GW-based antenna systems and components. This paper begins by comparing the GW-transmission line to other widely used transmission lines for the mmWave and sub-THz bands. Furthermore, the basic operating principle and possible implementation technique of the GW-technology are briefly discussed. In addition, various antennas and passive components have been developed based on the GW-technology. Despite its advantages in controlling electromagnetic wave propagation, it is also widely used for the packaging of electronic components such as transceivers and power amplifiers. This article also provided an overview of the current manufacturing technologies that are commonly used for the fabrication of GW-components. Finally, the practical applications and industry interest in GW technology developments for mmWave and sub-THz applications have been scrutinized.Funding Agencies|European Union - Marie Sklodowska-Curie [766231WAVECOMBEH2020-MSCA-ITN-2017]</p

Wide Band Embedded Slot Antennas for Biomedical, Harsh Environment, and Rescue Applications

For many designers, embedded antenna design is a very challenging task when designing embedded systems. Designing Antennas to given set of specifications is typically tailored to efficiently radiate the energy to free space with a certain radiation pattern and operating frequency range, but its design becomes even harder when embedded in multi-layer environment, being conformal to a surface, or matched to a wide range of loads (environments). In an effort to clarify the design process, we took a closer look at the key considerations for designing an embedded antenna. The design could be geared towards wireless/mobile platforms, wearable antennas, or body area network. Our group at UT has been involved in developing portable and embedded systems for multi-band operation for cell phones or laptops. The design of these antennas addressed single band/narrowband to multiband/wideband operation and provided over 7 bands within the cellular bands (850 MHz to 2 GHz). Typically the challenge is: many applications require ultra wide band operation, or operate at low frequency. Low frequency operation is very challenging if size is a constraint, and there is a need for demonstrating positive antenna gain

A New Class of Improved Bandwidth Planar Ultrawideband Modular Antenna (puma) Arrays Scalable to mm-Waves

A new class of Planar Ultrawideband Modular Antenna (PUMA) arrays, termed PUMAv3, is introduced to offer improved performance and further meet demand needs for multifunctional systems. PUMAv3 extends the frequency scalability of PUMA arrays to mm-waves (approximately 50 GHz) and improves bandwidth by 50\% without the use of a matching network or external baluns. The major enabling technical innovation is the advent of a new common-mode mitigation mechanism that relies upon capacitively-loaded shorting vias to push broadside catastrophic resonances below the operating band without inhibiting low-end bandwidth performance. Ridged waveguide models are employed to explain the operational principles and accurately predict the location of the common-mode frequency within the new array topology. Additionally, the superstrate loading scheme is split into two exclusive layers to enhance broadside and wide angle impedance levels while maintaining the highest frequency at 97% of the grating lobe frequency and reducing the overall array profile by up to 30%. The PUMAv3 also retains the attractive practical advantages inherent to the PUMA array family: aperture modularity, direct 50-ohm feeding, and low-cost planar multilayer PCB fabrication. Infinite array full-wave simulations of a dual-polarized PUMAv3 satisfying manufacture guidelines suggest 10.6-47.6 GHz (4.5:1) operation with strong VSWR levels out to 45 degrees, high port isolation and low cross-polarization